Disney 35609998 Assembly Instructions

Disney
Brand
Disney
Model
35609998
Type
Assembly Instructions

This manual is also suitable for

VERSION NO. 1 18/10/2021 MADE IN VIETNAM PAGE 1/1
Thank you for purchasing this quality product. Be sure to check all packing material
carefully for small parts which may have come loose inside the carton during shipment.
Please do not tighten parts until all are assembled.
VENDOR CODE: GLOB
999-01T-1 TWIN SLEIGH BED HEADBOARD + 4 SLATS (SKU# 35709990)
999-01T-2 TWIN SLEIGH BED FOOTBOARD (SKU# 35809992)
999-01F-1 FULL SLEIGH BED HEADBOARD + 4 SLATS (SKU# 35909994)
999-01F-2 FULL SLEIGH BED FOOTBOARD (SKU# 36009997)
999-01-3 TWIN / FULL SLEIGH BED SIDE RAILS (SKU# 36109999)
NO Q'TY
PARTS LIST
HEADBOARD
FOOTBOARD
SIDE RAIL
BED SLAT
A
B
C
D
1
1
2
4
*LOWER POSITION
*HIGHER POSITION
STEP1
STEP 2
NO DRAWING
Q'TY DESCRIPTION
18# 8*1" Screw
Screwdriver is not included
in hardware pack
VENDOR CODE: GLOB
STYLE #: 999-01-4
SKU# : 36209991
DESCRIPTION : SLEIGH STORAGE TRUNDLE
J
I
Step-5
B
When using a storage trundle,
please install the enclosed plastic corner protectors
to protect the bed posts from dents and scratches.
NOTE:
Carton
Thank you for purchasing this quality product. Be sure to check all packing material
carefully for small parts which may have come loose inside the carton during shipment
Please do not tighten parts until all are assembled.
NO Q'TY DRAWING DESCRIPTION
A
B
C
D
E
F
I
J
K
L
5
20
4
4
4
1
16
2
4
12
WHEEL
# 8*5/8" SCREW
∅1/4"*20*5/8" ALLEN BOLT
∅1/4" LOCK WASHER
∅1/4"*16MM *FLAT WASHER
∅1/4"ALLEN WRENCH
ALLEN BOLT
PARTITION
PLASTIC CORNER PROTECTOR
# 4*15MM SCREW
Step-4
Step-1
Step-2
Step-3
Take out the caster box
from top of carton window
Turn over the carton and open the BOTTOM,
then attach the casters to bottom of the
storage trundle by screws
Take out the trundle from
carton then put up all panels to correct position.
Caster box
Trundle storage
Attach all bolts and hardware
VERSION NO. 1 18/10/2021 MADE IN VIETNAM PAGE 1/1
Screwdriver is not included
in hardware pack
Thank you for purchasing this quality product. Be sure to check all packing material
carefully for small parts which may have come loose inside the carton during shipment.
Please do not tighten parts until all are assembled.
VERSION NO. 1 18/10/2021 MADE IN VIETNAM PAGE 1/1
NO Q'TY
PARTS LIST
A
B
C
D
E
1
1
2
4
4
HEADBOARD
FOOTBOARD
SIDE RAIL
BED SLAT
CRYSTAL FINIAL
*LOWER POSITION
*HIGHER POSITION
STEP1
STEP 2
STEP 3
VENDOR CODE: GLOB
999-02T-1 TWIN POST BED HEADBOARD + 4 SLATS (SKU# 35109998)
999-02T-2 TWIN POST BED FOOTBOARD (SKU# 35209990)
999-02F-1 FULL POST BED HEADBOARD + 4 SLATS (SKU# 35309992)
999-02F-2 FULL POST BED FOOTBOARD (SKU# 35409994)
999-02-3 TWIN / FULL POST BED SIDE RAILS (SKU# 35509996)
NO DRAWING
Q'TY DESCRIPTION
18# 8*1" Screw
Screwdriver is not included
in hardware pack
BA
L
K
Step-5
VENDOR CODE:
GLOB
STYLE #: 999-21
SKU# : 35609998
DESCRIPTION : STORAGE TRUNDLE
NOTE:
When using a storage trundle,
Please install the enclosed plastic corner protectors
To protect the bed posts from dents and scratches
Thank you for purchasing this quality product. Be sure to check all packing material
carefully for small parts which may have come loose inside the carton during shipment.
Please do not tighten parts until all are assembled.
NO Q'TY DRAWING
Step-4
Step-1
Step-2
Step-3
DESCRIPTION
A
B
C
D
E
F
I
J
K
L
5
20
4
4
4
1
16
2
4
12
WHEEL
# 8*5/8" SCREW
∅1/4"*20*5/8" ALLEN BOLT
∅1/4" LOCK WASHER
∅1/4"*16MM *FLAT WASHER
∅1/4"ALLEN WRENCH
ALLEN BOLT
PARTITION
PLASTIC CORNER PROTECTOR
# 4*15MM SCREW
Take out the caster box
from top of carton window
Turn over the carton and open the BOTTOM,
then attach the casters to bottom of the
storage trundle by screws
Take out the trundle from
carton then put up all panels to correct position.
Caster box
Trundle storage
Attach all bolts and hardware
Carton
VERSION NO. 1 18/10/2021 MADE IN VIETNAM PAGE 1/1
B
Screwdriver is not included
in hardware pack
VENDOR CODE: GLOB
STYLE #: 999-12DR
SKU# : 39109992
DESCRIPTION : VANITY DESK
Thank you for purchasing this quality product. Be sure to check all packing material
carefully for small parts which may have come loose inside the carton during shipment.
Please do not tighten parts until all are assembled.
VERSION NO. 1 18/10/2021 MADE IN VIETNAM PAGE 1/1
NO PARTS LIST Q'TY
DESCRIPTION
1LEG 4PCS
TIPPING
RESTRAINT HERE
NO DRAWING Q'TY DESCRIPTION
ATipping restraint
1
Screwdriver is not included
in hardware pack
VENDOR CODE: GLOB
STYLE #: 999-11
SKU# : 34509995
DESCRIPTION : HUTCH
A
CB
D
E
Thank you for purchasing this quality product. Be sure to check all packing material
carefully for small parts which may have come loose inside the carton during shipment.
Please do not tighten parts until all are assembled.
VERSION NO. 1 18/10/2021 MADE IN VIETNAM PAGE 1/1
NO DRAWING Q'TY
DESCRIPTION
A
B
C
D
E
4PCS
4PCS
4PCS
1PC
2PCS
∅1/4"*20*3/4" ALLEN BOLT
∅1/4" LOCK WASHER
∅1/4"*19MM FLAT WASHER
4MM ALLEN WRENCH
METAL BRACKET 98*24*3
Please do not tighten parts until all are assembled.
Thank you for purchasing this quality product. Be sure to check all packing material
carefully for small parts which may have come loose inside the carton during shipment.
1 4
Remove all wooden blocks from the bottom
of the case piece before assembling!
VENDOR CODE: GLOB
STYLE #: 999-16
SKU# : 34909993
DESCRIPTION : FIVE DRAWER CHEST
NO DRAWING Q'TY DESCRIPTION
A
B
5mm Allen Wrench
Tipping restraint
1
1
Screwdriver is not included
in hardware pack
NO DRAWING Q'TY DESCRIPTION
Leg
PARTS LIST
Leg box
Remove
VERSION NO. 1 18/10/2021 MADE IN VIETNAM PAGE 1/1
Please do not tighten parts until all are assembled.
Thank you for purchasing this quality product. Be sure to check all packing material
carefully for small parts which may have come loose inside the carton during shipment.
Remove all wooden blocks from the bottom
of the case piece before assembling!
Leg box
Remove
VENDOR CODE: GLOB
STYLE #: 999-17D
SKU# : 37809994
DESCRIPTION : SIX DRAWER DRESSER
VERSION NO. 1 18/10/2021 MADE IN VIETNAM PAGE 1/1
PARTS LIST
14Leg
NO DRAWING Q'TY DESCRIPTION
NO DRAWING Q'TY DESCRIPTION
A
B
5mm Allen Wrench
Tipping restraint
1
1
Screwdriver is not included
in hardware pack
Thank you for purchasing this quality product. Be sure to check all packing material
carefully for small parts which may have come loose inside the carton during shipment.
Please do not tighten parts until all are assembled.
VENDOR CODE: GLOB
STYLE #: 999-4
SKU# : 34709999
DESCRIPTION : TWO DRAWER NIGHTSTAND
Remove all wooden blocks from the bottom
of the case piece before assembling!
Leg box
Remove
VERSION NO. 1 18/10/2021 MADE IN VIETNAM PAGE 1/1
PARTS LIST
14Leg
NO DRAWING Q'TY DESCRIPTION
NO DRAWING Q'TY DESCRIPTION
A
B
5mm Allen Wrench
Tipping restraint
1
1
Screwdriver is not included
in hardware pack
NO DRAWING Q'TY DESCRIPTION
A
B
5mm Allen Wrench
Tipping restraint
1
1
Screwdriver is not included
in hardware pack
VENDOR CODE: GLOB
STYLE #: 999-4B
SKU# : 34809991
DESCRIPTION : LEG NIGHTSTAND
VERSION NO. 1 18/10/2021 MADE IN VIETNAM PAGE 1/1
Thank you for purchasing this quality product. Be sure to check all packing material
carefully for small parts which may have come loose inside the carton during shipment.
Please do not tighten parts until all are assembled.
CHOKING HAZARD -- Small Parts
This piece contains small parts, not
intended for children under 3 years of age.
NO DRAWING Q'TY DESCRIPTION
ATipping restraint
1
Screwdriver is not included
in hardware pack
VENDOR CODE: GLOB
STYLE #: 999-10
SKU# : 35009996
DESCRIPTION : SLIM CHEST
Remove all wooden blocks from the bottom
of the case piece before assembling!
Leg box
Remove
Thank you for purchasing this quality product. Be sure to check all packing material
carefully for small parts which may have come loose inside the carton during shipment.
Please do not tighten parts until all are assembled.
VERSION NO. 1 18/10/2021 MADE IN VIETNAM PAGE 1/1
PARTS LIST
14Leg
NO DRAWING Q'TY DESCRIPTION
NO DRAWING Q'TY DESCRIPTION
A
B
5mm Allen Wrench
Tipping restraint
1
1
Screwdriver is not included
in hardware pack
BA
L
K
Step-5
VENDOR CODE:
GLOB
STYLE #: 999-21
SKU# : 35609998
DESCRIPTION : STORAGE TRUNDLE
NOTE:
When using a storage trundle,
Please install the enclosed plastic corner protectors
To protect the bed posts from dents and scratches
Thank you for purchasing this quality product. Be sure to check all packing material
carefully for small parts which may have come loose inside the carton during shipment.
Please do not tighten parts until all are assembled.
NO Q'TY DRAWING
Step-4
Step-1
Step-2
Step-3
DESCRIPTION
A
B
C
D
E
F
I
J
K
L
5
20
4
4
4
1
16
2
4
12
WHEEL
# 8*5/8" SCREW
∅1/4"*20*5/8" ALLEN BOLT
∅1/4" LOCK WASHER
∅1/4"*16MM *FLAT WASHER
∅1/4"ALLEN WRENCH
ALLEN BOLT
PARTITION
PLASTIC CORNER PROTECTOR
# 4*15MM SCREW
Take out the caster box
from top of carton window
Turn over the carton and open the BOTTOM,
then attach the casters to bottom of the
storage trundle by screws
Take out the trundle from
carton then put up all panels to correct position.
Caster box
Trundle storage
Attach all bolts and hardware
Carton
VERSION NO. 1 18/10/2021 MADE IN VIETNAM PAGE 1/1
B
Screwdriver is not included
in hardware pack
Please do not tighten parts until all are assembled.
Thank you for purchasing this quality product. Be sure to check all packing material
carefully for small parts which may have come loose inside the carton during shipment.
VENDOR CODE: GLOB
STYLE #: 999-22C
SKU# : 38609991
DESCRIPTION : CARRIAGE CHEST
VERSION NO. 1 18/10/2021 MADE IN VIETNAM PAGE 1/1
PARTS LIST
14Leg
NO DRAWING Q'TY DESCRIPTION
Remove all wooden blocks from the bottom
of the case piece before assembling!
Remove
intended for children under 3 years of age.
This piece contains small parts, not
CHOKING HAZARD -- Small Parts
NO DRAWING Q'TY DESCRIPTION
A
B
5mm Allen Wrench
Tipping restraint
1
1
Screwdriver is not included
in hardware pack
Leg box
VENDOR CODE: GLOB
STYLE #: 999-5D
SKU# : 37909996
DESCRIPTION : EIGHT DRAWER DRESSER
Remove all wooden blocks from the bottom
of the case piece before assembling!
Leg box
Remove
Thank you for purchasing this quality product. Be sure to check all packing material
carefully for small parts which may have come loose inside the carton during shipment.
Please do not tighten parts until all are assembled.
VERSION NO. 1 18/10/2021 MADE IN VIETNAM PAGE 1/1
PARTS LIST
14Leg
NO DRAWING Q'TY DESCRIPTION
NO DRAWING Q'TY DESCRIPTION
A
B
5mm Allen Wrench
Tipping restraint
1
1
Screwdriver is not included
in hardware pack
Thank you for purchasing this quality product. Be sure to check all packing material
carefully for small parts which may have come loose inside the carton during shipment.
Please do not tighten parts until all are assembled.
VERSION NO. 1 18/10/2021 MADE IN VIETNAM PAGE 1/2
There are two options to assemble mirror: Option A to be mounted to the casegoods or
Option B to be hung on the wall.
Option A To be mounted to the casegoods
NO DRAWING Q'TY DESCRIPTION
1
2
1
2
WOODEN BRACKET ONE
WOODEN BRACKET TWO
VENDOR CODE: GLOB
STYLE #: 999-6M
SKU# : 38509999
DESCRIPTION : HEART MIRROR
A
NODRAWINGQ'TY DESCRIPTION
B
C
D
E
7PCS
7PCS
7PCS
1PC
1PC
∅ 1/4"*20*1-1/2" Allen bolt
∅ 1/4" Lock Washer
∅ 1/4"*19*2mm Flat Washer
4mm Allen Wrench
Tipping restraint
Screwdriver is not included
in hardware pack
Thank you for purchasing this quality product. Be sure to check all packing material
carefully for small parts which may have come loose inside the carton during shipment.
Please do not tighten parts until all are assembled.
VERSION NO. 1 18/10/2021 MADE IN VIETNAM PAGE 2/2
Opiton B To be hung on the wall
VENDOR CODE: GLOB
STYLE #: 999-6M
SKU# : 38509999
DESCRIPTION : HEART MIRROR
Thank you for purchasing this quality product. Be sure to check all packing material
carefully for small parts which may have come loose inside the carton during shipment.
Please do not tighten parts until all are assembled.
VENDOR CODE: GLOB
STYLE #: 999-18M
SKU# : 38409997
DESCRIPTION : OVAL MIRROR
VERSION NO. 1 18/10/2021 MADE IN VIETNAM PAGE 1/2
There are two options to assemble mirror: Option A to be mounted to the casegoods or
Option B to be hung on the wall.
Option A To be mounted to the casegoods
NO DRAWINGQ'TY DESCRIPTION
11WOODEN BRACKET
A
NODRAWINGQ'TY DESCRIPTION
B
C
D
E
4PCS
4PCS
4PCS
1PC
1PC
∅ 1/4"*20*1-1/2" Allen bolt
∅ 1/4" Lock Washer
∅ 1/4"*19*2mm Flat Washer
4mm Allen Wrench
Tipping restraint
Screwdriver is not included
in hardware pack
Thank you for purchasing this quality product. Be sure to check all packing material
carefully for small parts which may have come loose inside the carton during shipment.
Please do not tighten parts until all are assembled.
VENDOR CODE: GLOB
STYLE #: 999-18M
SKU# : 38409997
DESCRIPTION : OVAL MIRROR
VERSION NO. 1 18/10/2021 MADE IN VIETNAM PAGE 2/2
Opiton B To be hung on the wall
VENDOR CODE:
GLOB
STYLE #: 999-23
SKU# : 36409995
DESCRIPTION : BOOKCASE
Thank you for purchasing this quality product. Be sure to check all packing material
carefully for small parts which may have come loose inside the carton during shipment.
Please do not tighten parts until all are assembled.
VERSION NO. 1 18/10/2021 MADE IN VIETNAM PAGE 1/1
TIPPING
RESTRAINT HERE.
NO DRAWING Q'TY DESCRIPTION
ATipping restraint1
Screwdriver is not included
in hardware pack
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19

Disney 35609998 Assembly Instructions

Disney
Brand
Disney
Model
35609998
Type
Assembly Instructions
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents