2. Renesas
  3. SLG46585M-DIP

Renesas SLG46585M-DIP User manual

  • I have reviewed the Quick Start Guide for the Renesas DIP Adapter SLG46585M. This document describes how to use the board to adapt STQFN packages into a DIP footprint for easier prototyping. It also highlights features like the optional LED indicator and decoupling capacitor. I'm ready to answer your questions about this device.
  • What is the GreenPAK DIP Adapter?
    What is the size of the board?
    How many pins does the DIP footprint have?
SLG46585M GreenPAK DIP Adapter
Quick Start Guide
Revision 1.1
18-Mar-2022
1 of 2
© 2022 Renesas Electronics Corporation
1. Description
The GreenPAK DIP Adapter is a small PCB that lets you adapt
STQFN packages into a DIP footprint. This board can speed
up your design prototyping and testing. This small board
1.06x2.34 inch uses 20 pins DIP footprint with 0.3 inch width.
You can also use this adapter for prototyping by making
MSTQFN package compatible with solder free breadboards.
2. Features
• Low cost
• Simplifies prototyping of SMT IC’s
• Optional VDD LED indicator
• Decoupling capacitor included
• Optional I2C pull-up resistors
Note 1 All sizes in inches.
3. Top View
4. Bottom View
PIN23 (R_LDO_VIN1)
PIN24 (R_LDO_VOUT3)
PIN25 (GPIO)
PIN22 (R_LDO_VOUT2)
PIN29 (R_LDO_VOUT1)
PIN21 (R_LDO_VIN0)
PIN20 (R_LDO_VOUT0)
PIN26 (DC_CCM)
PIN14 (R_DC_VIN)
PIN4 (GND)
PIN16 (VDD)
PIN28 (GPI)
PIN3 (GPIO)
PIN2 (GPIO)
PIN7 (DC_INT)
PIN5 (GPIO)
PIN15 (GPIO)
PIN17 (SCL/GPIO)
PIN18 (SDA/GPIO)
PIN19 (GPIO)
PIN24 (LDO_VOUT3)
PIN4 (GND)
Pins Pins
DC_OUT
PIN4 (GND)
PIN23 (LDO_VIN1)
PIN4 (GND)
PIN4 (GND)
PIN14 (DC_VIN)
PIN22 (LDO_VOUT2)
PIN23 (LDO_VIN1)
PIN4 (GND)
PIN4 (GND)
PIN29 (LDO_VOUT1)
PIN4 (GND)
PIN20 (LDO_VOUT0)
PIN4 (GND)
Chip pin number
SLG46585M GreenPAK DIP Adapter
Quick Start Guide
Revision 1.1
18-Mar-2022
2 of 2
© 2022 Renesas Electronics Corporation
5. Board Schematic
/