2. Renesas
  3. SLG46583V-DIP

Renesas SLG46583V-DIP User manual

  • Hello! I've reviewed the Quick Start Guide for the Renesas SLG46583V DIP Adapter. This document outlines the adapter's features, including its use for simplifying SMT IC prototyping with its DIP footprint, and mentions optional features like a VDD LED indicator and I2C pull-up resistors. I'm ready to answer your questions about this adapter.
  • What is the purpose of the GreenPAK DIP Adapter?
    What size DIP footprint does this adapter use?
    What optional features are available on the GreenPAK DIP Adapter?
SLG46583V GreenPAK DIP Adapter
Quick Start Guide
Revision 1.1
17-Mar-2022
1 of 2
© 2022 Renesas Electronics Corporation
1. Description
The GreenPAK DIP Adapter is a small PCB that lets you adapt
STQFN packages into a DIP footprint. This board can speed
up your design prototyping and testing. This small board
0.90x2.33 inch uses 20 pins DIP footprint with 0.3 inch width.
You can also use this adapter for prototyping by making
STQFN package compatible with solder free breadboards.
2. Features
• Low cost
• Simplifies prototyping of SMT IC’s
• Optional VDD LED indicator
• Decoupling capacitor included
• Optional I2C pull-up resistors
Note 1 All sizes in inches.
3. Top View
4. Bottom View
PIN14 (R_LDO_VOUT2)
PIN13 (R_LDO_VOUT1)
PIN12 (R_LDO_VIN0)
PIN10 (GPIO)
PIN19 (GPIO)
PIN17, 20 (GND)
PIN11 (R_LDO_VOUT0)
PIN15 (R_LDO_VIN1)
PIN16 (R_LDO_VOUT3)
PIN14 (LDO_VOUT2)
PIN17,20 (GND)
PIN13 (LDO_VOUT1)
PIN17,20 (GND)
PIN11 (LDO_VOUT0)
PIN17,20 (GND)
PIN16 (LDO_VOUT3)
PIN17,20 (GND)
PIN7, 20 (GND) PIN7 (VDD)
PIN3 (GPIO)
PIN4 (GPIO)
PIN5 (GPIO)
PIN6 (GPI)
PIN18 (GPIO)
PIN8 (SCL/GPIO)
PIN9 (SDA/GPIO)
PIN1 (GPIO)
PIN2 (GPIO)
Pins
PIN12 (LDO_VIN0)
PIN17,20 (GND)
PIN15 (LDO_VIN1)
PIN17,20 (GND)
Pins
I2C pull up resisitors (optional)
Chip pin number
SLG46583V GreenPAK DIP Adapter
Quick Start Guide
Revision 1.1
17-Mar-2022
2 of 2
© 2022 Renesas Electronics Corporation
5. Board Schematic
/