2. Renesas
  3. SLG47115V-DIP

Renesas SLG47115V-DIP Quick start guide

  • Hello! I've reviewed the Quick Start Guide for the Renesas SLG47115V SLG47115 DIP Adapter. This document details how to utilize this adapter for prototyping, including its features like the four high-current GPOs and current sensing options. I am ready to answer your questions about the adapter based on the information in this guide.
  • What is the purpose of the SLG47115 DIP Adapter?
    What is the current capacity per high voltage GPO?
    What type of footprint does the DIP Adapter use?
Quick Start Guide
SLG47115V GreenPAK DIP Adapter
R12QS0053EU0100 Rev.1.00
May 12, 2022
Page 1
© 2022 Renesas Electronics
This user guide is intended to familiarize new users with the SLG47115V GreenPAK DIP Adapter. It consists of
the description of the board, lists its features, shows top and bottom views, as well as the board schematic.
Contents
1. Description ..................................................................................................................................................... 1
2. Features .......................................................................................................................................................... 1
3. Top View ......................................................................................................................................................... 2
4. Bottom View ................................................................................................................................................... 2
5. Board Schematic ........................................................................................................................................... 3
6. Revision History ............................................................................................................................................ 3
1. Description
The SLG47115 DIP Adapter is a small PCB that lets you adapt STQFN packages into a DIP footprint. This board
can speed up your design prototyping and testing. This small board 0.90x2.20 inch uses 20 pins DIP footprint
with 0.3 inch width. You can also use this adapter for prototyping by making STQFN package compatible with
solder free breadboards.
2. Features
■ Low cost
■ Simplifies prototyping of SMT IC’s
■ Four high voltage high current output GPOs
■ Current up to 2 A per HV GPO
■ Current sensing resistors
■ Variable current sensing configurations
■ Optional VDD LED indicator
■ Decoupling capacitor included
■ Screw terminals for high voltage and high current lines
■ Optional I2C pull-up resistors
R12QS0053EU0100 Rev.1.00
May 12, 2022
Page 2
Note 1: All sizes in millimeters (mm).
3. Top View
PIN1 (VDD)
Pins
PIN3 (GPI)
PIN2 (GPIO0)
Not connected
Not connected
Not connected
Not connected
PIN15 (GPIO2/SCL)
PIN16 (GPIO3/SDA)
PIN19 (GPIO5)
Not connected
Not connected
PIN17 (GPIO4)
PIN14 (GPIO1)
Not connected
Not connected
Not connected
Not connected
PIN20 (GPIO6)
GND
Pins
LED current limit resistor (optional) VDD LED indicator (optional)
Chip package type
Chip package number
SENSE to GND (R4 BYPASS) jumper
PIN11 & PIN6 (VDD2_B)
HV_GND
HV_GND
HV_GND
PIN9 & PIN10 (HV_GPO1)
PIN9 & PIN10 (HV_GPO1)
HV_GND
VDD2 decoupling capacitor (C2-C4)
HVPAK chip
VDD Chip decoupling capacitor
PinsPins
PIN11 & PIN6 (VDD2_B)
SHUNT RESISTOR FOR VDD2 CIRCUIT
4. Bottom View
Not connected
Pins
Not connected
PIN17 (GPIO4)
PIN14 (GPIO1)
Not connected
Not connected
Not connected
Not connected
PIN20 (GPIO6)
GND
PIN1 (VDD)
Pins
PIN3 (GPI)
PIN2 (GPIO0)
Not connected
Not connected
Not connected
Not connected
PIN15 (GPIO2/SCL)
PIN16 (GPIO3/SDA)
PIN19 (GPIO5)
HV_GND
PIN9 & PIN10 (HV_GPO1)
PIN9 & PIN10 (HV_GPO1)
HV_GND
Pins
PIN11 & PIN6 (VDD2_B)
HV_GND
HV_GND
Pins
PIN11 & PIN6 (VDD2_B)
R12QS0053EU0100 Rev.1.00
May 12, 2022
Page 3
5. Board Schematic
6. Revision History
Revision
Date
Description
1.00
May 12, 2022
Initial release.
/