SLG46585M GreenPAK DIP Adapter
Quick Start Guide
Revision 1.1
18-Mar-2022
1 of 2
© 2022 Renesas Electronics Corporation
1. Description
The GreenPAK DIP Adapter is a small PCB that lets you adapt
STQFN packages into a DIP footprint. This board can speed
up your design prototyping and testing. This small board
1.06x2.34 inch uses 20 pins DIP footprint with 0.3 inch width.
You can also use this adapter for prototyping by making
MSTQFN package compatible with solder free breadboards.
2. Features
• Low cost
• Simplifies prototyping of SMT IC’s
• Optional VDD LED indicator
• Decoupling capacitor included
• Optional I2C pull-up resistors
Note 1 All sizes in inches.
3. Top View
PIN3 (GPIO)
PIN28 (GPI)
PIN16 (VDD)
PIN2 (GPIO)
PIN7 (DC_INT)
PIN5 (GPIO)
PIN15 (GPIO)
PIN17 (SCL/GPIO)
PIN18 (SDA/GPIO)
PIN19 (GPIO)
PIN25 (GPIO)
PIN24 (R_LDO_VOUT3)
PIN23 (R_LDO_VIN1)
PIN22 (R_LDO_VOUT2)
PIN29 (R_LDO_VOUT1)
PIN21 (R_LDO_VIN0)
PIN20 (R_LDO_VOUT0)
PIN26 (DC_CCM)
PIN14 (R_DC_VIN)
PIN4 (GND)
PIN4 (GND)
PIN23 (LDO_VIN1)
PIN24 (LDO_VOUT3)
PIN4 (GND)
PIN22 (LDO_VOUT2)
PIN4 (GND)
PIN29 (LDO_VOUT1)
PIN4 (GND)
PIN20 (LDO_VOUT0)
PIN4 (GND)
DC_OUT
PIN4 (GND)
PIN23 (LDO_VIN1)
PIN4 (GND)
PIN4 (GND)
PIN14 (DC_VIN)
GreenPAK chip
Chip package type
Chip package number
VDD LED indicator (optional)
Pins Pins
4. Bottom View
PIN23 (R_LDO_VIN1)
PIN24 (R_LDO_VOUT3)
PIN25 (GPIO)
PIN22 (R_LDO_VOUT2)
PIN29 (R_LDO_VOUT1)
PIN21 (R_LDO_VIN0)
PIN20 (R_LDO_VOUT0)
PIN26 (DC_CCM)
PIN14 (R_DC_VIN)
PIN4 (GND)
PIN16 (VDD)
PIN28 (GPI)
PIN3 (GPIO)
PIN2 (GPIO)
PIN7 (DC_INT)
PIN5 (GPIO)
PIN15 (GPIO)
PIN17 (SCL/GPIO)
PIN18 (SDA/GPIO)
PIN19 (GPIO)
PIN24 (LDO_VOUT3)
PIN4 (GND)
Pins Pins
DC_OUT
PIN4 (GND)
PIN23 (LDO_VIN1)
PIN4 (GND)
PIN4 (GND)
PIN14 (DC_VIN)
PIN22 (LDO_VOUT2)
PIN23 (LDO_VIN1)
PIN4 (GND)
PIN4 (GND)
PIN29 (LDO_VOUT1)
PIN4 (GND)
PIN20 (LDO_VOUT0)
PIN4 (GND)
Chip pin number
SLG46585M GreenPAK DIP Adapter
Quick Start Guide
Revision 1.1
18-Mar-2022
2 of 2
© 2022 Renesas Electronics Corporation
5. Board Schematic
/