Fantec MD-25US User manual
- Category
- External hard drives
- Type
- User manual
User Manual
FANTEC MD-25US
FEATURES
- For 2.5” (6,4 cm) HDD/SSD with all standard sizes
- Plug and Play via USB 2.0
- USB 2.0 Connector
- Data transfer rate up to 480 Mbps
- Energy saving by low power consumption
- Dimensions: W76 x H14 x D114 (mm)
- Work with Windows 2000/XP/Vista/7
Mac OS 10.3 and above
- Package contents: USB Cable, Manual,
CD with backup software
HARDWARE INSTALLATION
I. Push the top cover and
release the undercover.
II. Fix HDD onto SATA socket.
III. Place back the undercover
IV. Installation Done
Backup Software Operation Instruction
Install the software:
Double click the icon to install the software on your computer. It can work
on Windows 2000/XP/Vista/ 7 OS.
Note: The software can be found on the
Driver CD.
Backup your daily data to FANTEC MD-25US:
1. Extend the computer drive tree on the left; select the folder you want to
backup.
2. Specify the destination you are going to backup to, select the backup
mode, and then click Backup button.
Restore data from the FANTEC MD-25US to computer:
1. Click the second button on the left to open the restoring window.
2. Select the restore destination in the computer drive tree, and browse the
restore source, and then click Restore button. (Select the restore options
according to your work.)
Schedule your Backup:
1. Click the third button on the left to open the schedule window.
2. You can schedule the FANTEC MD-25US to backup the data
Daily/Weekly/Monthly/None according to your demand.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
Fantec MD-25US User manual
- Category
- External hard drives
- Type
- User manual
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI