Page is loading ...
http://www.tyan.com
1
S7086
Version 1.0
Copyright
Copyright © 2014 MiTAC International Corporation. All rights reserved. No part of
this manual may be reproduced or translated without prior written consent from
MiTAC International Corporation.
Trademark
All registered and unregistered trademarks and company names contained in this
manual are property of their respective owners including, but not limited to the
following.
TYAN
®
is a trademark of MiTAC International Corporation.
Intel
®
is a trademark of Intel
®
Corporation.
AMI, AMI BIOS are trademarks of AMI Technologies.
Microsoft
®
, Windows
®
are trademarks of Microsoft Corporation.
Winbond
®
is a trademark of Winbond Electronics Corporation.
Notice
Information contained in this document is furnished by MiTAC International
Corporation and has been reviewed for accuracy and reliability prior to printing.
MiTAC assumes no liability whatsoever, and disclaims any express or implied
warranty, relating to sale and/or use of TYAN
®
products including liability or
warranties relating to fitness for a particular purpose or merchantability. MiTAC
retains the right to make changes to product descriptions and/or specifications at
any time, without notice. In no event will MiTAC be held liable for any direct or
indirect, incidental or consequential damage, loss of use, loss of data or other
malady resulting from errors or inaccuracies of information contained in this
document.
http://www.tyan.com
2
Contents
S7086 ............................................................................................................ 1
Before you begin… .................................................................................... 3
Chapter 1: Instruction ................................................................................ 4
1.1 Congratulations ................................................................................. 4
1.2 Hardware Specifications .................................................................... 4
1.3 Software Specifications ..................................................................... 9
Chapter 2: Board Installation ................................................................... 10
2.1 Board Image .................................................................................... 11
2.2 Block Diagram ................................................................................. 12
2.3 Motherboard Mechanical Drawing ................................................... 13
2.4 Board Parts, Jumpers and Connectors ........................................... 14
2.5 Installing the Processor and Heatsink ............................................. 28
2.6 Thermal Interface Material............................................................... 32
2.7 Tips on Installing Motherboard in Chassis ...................................... 33
2.8 Installing the Memory ...................................................................... 35
2.9 Attaching Drive Cables .................................................................... 40
2.10 Installing Add-In Cards .................................................................. 41
2.11 Connecting External Devices ........................................................ 42
2.12 Installing the Power Supply ........................................................... 43
2.13 Finishing Up ................................................................................... 44
Chapter 3: BIOS Setup ............................................................................. 45
3.1 About the BIOS ................................................................................ 45
3.2 Main Menu ....................................................................................... 47
3.3 Advanced Menu ............................................................................... 48
3.4 Intel RCSetup Menu ........................................................................ 76
3.5 Server Management ...................................................................... 102
3.6 Security .......................................................................................... 105
3.7 Boot ............................................................................................... 106
3.8 Save & Exit .................................................................................... 108
Chapter 4: Diagnostics ........................................................................... 110
4.1 Flash Utility .................................................................................... 110
4.2 AMIBIOS Post Code (Aptio) .......................................................... 111
Appendix I: Fan and Temp Sensors ..................................................... 118
Glossary ................................................................................................... 123
Technical Support .................................................................................. 129
http://www.tyan.com
3
Before you begin…
Check the box contents!
The retail motherboard package should contain the following:
1 x S7086 Motherboard
2 x SATA Single Cable
1 x Rear IO shielding
1 x S7086 Quick Installation Guide
1 x TYAN
®
Driver CD
IMPORTANT NOTE:
Sales samples may not come with any of the accessories listed above.
If you have ordered a sales sample and you are missing any of the above items,
please contact your sales representative to help order accessories.
http://www.tyan.com
4
Chapter 1: Instruction
1.1 Congratulations
You have purchased the powerful TYAN
®
S7086 motherboard, based on the Intel
®
C612 Wellsburg chipset. The S7086 is designed to support dual Intel
®
Xeon E5-
2600 v3 (Haswell-EP) Series processors, and up to 32GB RDIMM and 64GB
LRDIMM and 128GB LRDIMM 3DS* DDR4 memory for each DIMM slot.
Leveraging advanced technology from Intel
®
, the S7086 is capable of offering
scalable 32 and 64-bit computing, high-bandwidth memory design, and lightning-
fast PCI-E bus implementation.
The S7086 not only empowers you in today‟s demanding IT environment but also
offers a smooth path for future application upgradeability. All of these rich feature
sets provide the S7086 with the power and flexibility to meet demanding
requirements for today‟s IT environments.
Remember to visit the TYAN
®
website at http://www.tyan.com. There you can find
all the information on all TYAN
®
products as well as all the supporting documentation,
FAQs, Drivers and BIOS upgrades.
1.2 Hardware Specifications
TYAN S7086 (S7086GM3NR)
Processor
Supported CPU
Series
Intel Xeon Processor E5-2600 v3 series processors
Socket Type / Q'ty
LGA2011 / (2)
Thermal Design
Power (TDP)
wattage
Max up to 160W
System Bus
Up to 9.6/ 8.0/ 6.4 GT/s with Intel QuickPath
Interconnect (QPI) support
Chipset
PCH
Intel C612
Memory
Supported DIMM
Qty
(8)+(8) DIMM slots
DIMM Type / Speed
RDIMM DDR4 2133/1866/1600 / LRDIMM DDR4
2133/1600 / LRDIMM 3DS DDR4 2133/1600
Capacity
Up to 512GB RDIMM/ 1,024GB LRDIMM/ 2,048GB
LRDIMM 3DS *Follow latest Intel DDR4 Memory POR
Memory channel
4 Channels per CPU
Memory voltage
1.2V
http://www.tyan.com
5
Expansion
Slots
PCI-E
(1)MEZZ slot x8 link from CPU0 for OCP LAN card,
(1) MEZZ slot x8 link from CPU0 for OCP SAS card
(1)X16 slot with x16 link and (1) x4 slot with x8 link from
CPU0 at SLOT6#
(1)X16 slot with x16 link and (1) x4 slot with x8 link from
CPU1 at SLOT6.5#
Recommended
TYAN OCP Card
M7062-B811-1T, PCI-E Gen3 x8, Broadcom 10GbE
Mezz Card / M7062-B810-2T, PCI-E Gen3 x8,
Broadcom 10GbE Mezz Card / M7076-X540-2T, PCI-E
Gen3 x8, Intel 10GbE Mezz Card / M7076-3108-8I, PCI-
E Gen3 x8, LSI SAS 12G Mezz Card / M7094-2308G-8I,
PCI-E Gen3 x8, LSI SAS 6G Mezz Card / M7076-3008-
8I, PCI-E Gen3 x8, LSI SAS 12G Mezz Card / M7076-
I350, PCI-E Gen3 x8, Intel (2)GbE Mezz Card / M7062-
I599-1T, PCI-E Gen3 x8, Intel 10GbE Mezz Card /
M7062-I599-2T, PCI-E Gen3 x8, Intel 10GbE Mezz Card
Recommended
TYAN Riser Card
M7056-L24-3F, PCI-E x16 2U riser card (left) / M7056-
R24-3F, PCI-E x16 2U riser card (right)
LAN
Port Q'ty
(3) GbE ports (1 port shared with IPMI)
Controller
Intel I350-AM2 / Intel I210
Storage
SATA
Connector
(1) Mini-SAS (4-ports) + (2) SATA (totally support 6
ports)
Controller
Intel C612
Speed
6.0 Gb/s
RAID
RAID 0/1/10/5 (Intel RST)
SSATA
Connector
(1) Mini-SAS (4-ports)
Controller
Intel C612
Speed
6.0 Gb/s
RAID
RAID 0/1/10/5 (Intel RST)
Graphic
Connector type
D-Sub 15-pin
Resolution
Up to 1920x1200
Chipset
Aspeed AST2400
Input /Output
USB
(2) USB3.0 ports (at rear) / (2) USB 2.0 ports (via cable)
/ (1) Type-A USB3.0 port / (2) USB 3.0 ports (via cable)
COM
(2) ports (1 at rear, 1 via cable)
VGA
(1) D-Sub 15-pin VGA port
RJ-45
Total (3) GbE ports, (1) shared with IPMI
Power
SSI 24-pin + 8-pin + 8-pin power connectors
Front Panel
(1) 2x12-pin SSI front panel header
PSMI
(1) 1x5-pin header
SATA
(2) SATA-III connectors + (2) Mini-SAS (4-in-1)
connectors
System
Monitoring
Chipset
Aspeed AST2400
Voltage
Monitors voltage for CPU, memory, chipset & power
supply
http://www.tyan.com
6
Fan
Total (7) 4-pin headers
Temperature
Monitors temperature for CPU & system environment
LED
Over temperature warning indicator / Fan & PSU fail
LED indicator
Others
Watchdog timer support
Server
Management
Onboard Chipset
Onboard Aspeed AST2400
AST2400 IPMI
Feature
IPMI 2.0 compliant baseboard management controller
(BMC) / Supports storage over IP and remote platform-
flash / USB 2.0 virtual hub
AST2400 iKVM
Feature
24-bit high quality video compression / 10/100 Mb/s
MAC interface
BIOS
Brand / ROM size
AMI / 16MB
Feature
User-configurable H/W monitoring / SMBIOS
2.7/PnP/Wake on LAN / PXE boot support / ACPI
3.0/ACPI sleeping states S4,S5
Physical
Dimension
Form Factor
EATX
Board Dimension
12"x13" (305x330mm)
Operating
System
OS supported list
Please refer to our Intel OS supported list.
Regulation
FCC (DoC)
Class A
CE (DoC)
Yes
Operating
Environment
Operating Temp.
10° C ~ 35° C (50° F~ 95° F)
Non-operating
Temp.
- 40° C ~ 70° C (-40° F ~ 158° F)
In/Non-operating
Humidity
90%, non-condensing at 35° C
RoHS
RoHS 6/6
Compliant
Yes
Package
Contains
Motherboard
(1) S7086 Motherboard
Manual
(1) Quick Installation Guide
Installation CD
(1) TYAN installation CD
TYAN S7086 (S7086GM3NRE)
Processor
Supported CPU
Series
Intel Xeon Processor E5-2600 v3 series processors
Socket Type / Q'ty
LGA2011 / (2)
Thermal Design
Power (TDP)
wattage
Max up to 160W
System Bus
Up to 9.6/ 8.0/ 6.4 GT/s with Intel QuickPath
Interconnect (QPI) support
Chipset
PCH
Intel C612
http://www.tyan.com
7
Memory
Supported DIMM
Qty
(8)+(8) DIMM slots
DIMM Type / Speed
RDIMM DDR4 2133/1866/1600 / LRDIMM DDR4
2133/1600 / LRDIMM 3DS DDR4 2133/1600
Capacity
Up to 512GB RDIMM/ 1,024GB LRDIMM/ 2,048GB
LRDIMM 3DS *Follow latest Intel DDR4 Memory POR
Memory channel
4 Channels per CPU
Memory voltage
1.2V
Expansion
Slots
PCI-E
(1)MEZZ slot x8 link from CPU0 for OCP LAN card,
(1) MEZZ slot x8 link from CPU0 for OCP SAS card
(1)X16 slot with x16 link and (1) x4 slot with x8 link from
CPU0 at SLOT6#
(1)X16 slot with x16 link and (1) x4 slot with x8 link from
CPU1 at SLOT6.5#
Recommended
TYAN OCP Card
M7062-B811-1T, PCI-E Gen3 x8, Broadcom 10GbE
Mezz Card / M7062-B810-2T, PCI-E Gen3 x8,
Broadcom 10GbE Mezz Card / M7076-X540-2T, PCI-E
Gen3 x8, Intel 10GbE Mezz Card / M7076-3108-8I, PCI-
E Gen3 x8, LSI SAS 12G Mezz Card / M7094-2308G-8I,
PCI-E Gen3 x8, LSI SAS 6G Mezz Card / M7076-3008-
8I, PCI-E Gen3 x8, LSI SAS 12G Mezz Card / M7076-
I350, PCI-E Gen3 x8, Intel (2)GbE Mezz Card / M7062-
I599-1T, PCI-E Gen3 x8, Intel 10GbE Mezz Card /
M7062-I599-2T, PCI-E Gen3 x8, Intel 10GbE Mezz Card
Recommended
TYAN Riser Card
M7056-L24-3F, PCI-E x16 2U riser card (left) / M7056-
R24-3F, PCI-E x16 2U riser card (right)
LAN
Port Q'ty
(3) GbE ports (1 port shared with IPMI)
Controller
Intel I350-AM2 / Intel I210
Storage
SATA
Connector
(1) Mini-SAS (4-ports) + (2) SATA (totally support 6
ports)
Controller
Intel C612
Speed
6.0 Gb/s
RAID
RAID 0/1/10/5 (Intel RST)
SSATA
Connector
(1) Mini-SAS (4-ports)
Controller
Intel C612
Speed
6.0 Gb/s
RAID
RAID 0/1/10/5 (Intel RST)
Graphic
Connector type
D-Sub 15-pin
Resolution
Up to 1920x1200
Chipset
Aspeed AST2400
Input /Output
USB
(2) USB3.0 ports (at rear) / (2) USB 2.0 ports (via cable)
/ (1) Type-A USB3.0 port / (2) USB 3.0 ports (via cable)
COM
(2) ports (1 at rear, 1 via cable)
VGA
(1) D-Sub 15-pin VGA port
RJ-45
Total (3) GbE ports, (1) shared with IPMI
Power
SSI 24-pin + 8-pin + 8-pin power connectors
http://www.tyan.com
8
Front Panel
(1) 2x12-pin SSI front panel header
PSMI
(1) 1x5-pin header
SATA
(2) SATA-III connectors + (2) Mini-SAS (4-in-1)
connectors
PCIE Header
(2) PCIE X4 From CPU1,SAS HD1/SAS HD2
System
Monitoring
Chipset
Aspeed AST2400
Voltage
Monitors voltage for CPU, memory, chipset & power
supply
Fan
Total (7) 4-pin headers
Temperature
Monitors temperature for CPU & system environment
LED
Over temperature warning indicator / Fan & PSU fail
LED indicator
Others
Watchdog timer support
Server
Management
Onboard Chipset
Onboard Aspeed AST2400
AST2400 IPMI
Feature
IPMI 2.0 compliant baseboard management controller
(BMC) / Supports storage over IP and remote platform-
flash / USB 2.0 virtual hub
AST2400 iKVM
Feature
24-bit high quality video compression / 10/100 Mb/s
MAC interface
BIOS
Brand / ROM size
AMI / 16MB
Feature
User-configurable H/W monitoring / SMBIOS
2.7/PnP/Wake on LAN / PXE boot support / ACPI
3.0/ACPI sleeping states S4,S5
Physical
Dimension
Form Factor
EATX
Board Dimension
12"x13" (305x330mm)
Operating
System
OS supported list
Please refer to our Intel OS supported list.
Regulation
FCC (DoC)
Class A
CE (DoC)
Yes
Operating
Environment
Operating Temp.
10° C ~ 35° C (50° F~ 95° F)
Non-operating
Temp.
- 40° C ~ 70° C (-40° F ~ 158° F)
In/Non-operating
Humidity
90%, non-condensing at 35° C
RoHS
RoHS 6/6
Compliant
Yes
Package
Contains
Motherboard
(1) S7086 Motherboard
Manual
(1) Quick Installation Guide
Installation CD
(1) TYAN installation CD
http://www.tyan.com
10
Chapter 2: Board Installation
You are now ready to install your motherboard.
How to install our products right… the first time
The first thing you should do is read this user‟s manual. It contains important
information that will make configuration and setup much easier. Here are some
precautions you should take when installing your motherboard:
(1) Ground yourself properly before removing your motherboard from the
antistatic bag. Unplug the power from your computer power supply and
then touch a safely grounded object to release static charge (i.e. power
supply case). For the safest conditions, MiTAC recommends wearing a
static safety wrist strap.
(2) Hold the motherboard by its edges and do not touch the bottom of the
board, or flex the board in any way.
(3) Avoid touching the motherboard components, IC chips, connectors,
memory modules, and leads.
(4) Place the motherboard on a grounded antistatic surface or on the antistatic
bag that the board was shipped in.
(5) Inspect the board for damage.
The following pages include details on how to install your motherboard into your
chassis, as well as installing the processor, memory, disk drives and cables.
Caution!
1. To avoid damaging the motherboard and associated
components, do not use torque force greater than
7kgf/cm (6.09 lb/in) on each mounting screw for
motherboard installation.
2. Do not apply power to the board if it has been
damaged.
http://www.tyan.com
11
2.1 Board Image
S7086
This picture is representative of the latest board revision available at the time of
publishing. The board you receive may not look exactly like the above picture.
NOTE: SAS HD1/SAS HD2 connectors are only in S7086GM3NRE SKU
http://www.tyan.com
12
2.2 Block Diagram
S7086 Block Diagram
http://www.tyan.com
13
2.3 Motherboard Mechanical Drawing
http://www.tyan.com
14
2.4 Board Parts, Jumpers and Connectors
This diagram is representative of the latest board revision available at the time of
publishing. The board you receive may not look exactly like the above diagram. The
DIMM slot numbers shown above can be used as a reference when reviewing the
DIMM population guidelines shown later in the manual. For the latest board revision,
please visit our web site at http://www.tyan.com.
http://www.tyan.com
15
Motherboard Components
Connectors
1. LAN port#3 (IPMI) and USB 3.0 ports
17. 4-pin Fan Connector(CPU0_FAN)
2. 7-pin vertical SATA 3.0 Connector
(SATA5,upper/SATA4 down)
18. 8-pin Power Connector(PW2)
3. VGA Port / COM Port
19. 4-pin Fan Connector(SYS_FAN3)
4. 4-pin Fan Connector(SYS_FAN4)
20. 4-pin Fan Connector(SYS_FAN2)
5. ID Button(SW2)
21. 4-pin Fan Connector (SYS_FAN1)
6. Clear Button(SW1)
22. 8-pin Power Connector(PW3)
7. LAN Port#1(LAN1)
23. PCIE Header (PCIEx4 From CPU1 SAS
HD1,right/ SAS HD2,left)
8. LAN Port#2(LAN2)
24. 4-pin Fan Connector(CPU1_FAN)
9. ID LED
25.USB 2.0 Header(USB2_HD1)
10. 4-pin Fan Connector(SYS_FAN5)
26.PSMI Connector(PSMI_HD1)
11. TYAN Module Header
27. 24-pin Power Connector(PW1)
12. BMC LED
28. USB 3.0 Header(USB3_HD1)
13. COM Port(COM2)
29. TYPE_A USB Header(TYPEA_USB3)
14. Fan IO Header(FAN_HD1)
30. 4-in-1 Mini SAS Connector(SSATA0-3)
15. Front Panel Header(FP_HD1)/LAN2
LED Header(LAN_LED_HD1)
31. PCH SATA SGPIO
Header(SGPIO1,SATA0-5)
16. IPMB Connector(IPMB_HD1)
32. 4-in-1 Mini SAS Connector(SATA0-3)
Headers/Jumpers
a. PSU Alert Disable Jumper (3PHD_9)
e. MIC Card Jumper (3PHD_3)
b. BIOS Security Jumper(3PHD_4)
f. ID_LED Button Header (2PHD_2)
c. ME Recovery Mode Jumper (3PHD_6)
g. Chassis Intrusion Header (2PHD_1)
d. Buzzer Disable Jumper (4PHD_1)
Slots
A. PCI-E Gen3 x8 MEZZ slot f/ CPU0 for
LAN card
CPU0 DIMM G/H/I/J
B. PCI-E Gen3 x16 slot(x16 link) f/ CPU1
CPU1 DIMM K/L/M/N
C. PCI-E Gen3 x16 slot(x16 link) f/ CPU0
D. PCI-E Gen3 x4 slot(x8 link) f/ CPU1
E. PCI-E Gen3 x4 slot(x8 link) f/ CPU0
F. PCI-E Gne3 x8 MEZZ Slot f/ CPU0 for
SAS card
http://www.tyan.com
16
SYS_FAN1
CPU0_FAN
PSMI_HD1
SYS_FAN2
SYS_FAN3
SYS_FAN4
CPU1_FAN
SYS_FAN5
SGPIO1
FP_HD1
LAN_LED_HD1
http://www.tyan.com
17
SYS_FAN1/2/3/4/5/CPU0/1_FAN: 4-Pin FAN Connector
Pin
1
2
3
4
Signal
GND
+12V
FAN_TACH
FAN_PWM
Use this header to connect the cooling fan to your motherboard to keep the
system stable and reliable.
Note: A 4-pin fan is required for fan speed control.
FP_HD1: Front Panel Connector
Signal
Pin
Pin
Signal
PWRLED+
1
2
V3P3_AUX
KEY
3
4
ID_LED+
PWRLED-
5
6
ID_LED-
HDDLED+
7
8
HWM_FAULT_LED-
HDDLED-
9
10
SYS_FAULT_LED-
PWR_SW#
11
12
LAN1_ACTLE+
GND
13
14
LAN1_ACTLED-
RST_SW#
15
16
SMBDATA
GND
17
18
SMBCLK
FP_IDLED_BTN_N
19
20
INTRUSION#
FPIO_TEMP_IN
21
22
LAN2_ACTLED+
NMI_SW#
23
24
LAN2_ACTLED-
PSIMI_HD1: PSMI Connector
Pin
1
2
3
4
5
Signal
SMB_CLK
SMB_DAT
SMB_ALERT#
GND
V3P3
SGPIO1: SATA SGPIO Header
Signal
Pin
Pin
Signal
SCL
1
2
NA
SDA
3
4
SDATA OUT-
GND
5
6
SLOAD
KEY
7
8
SCLOCK
P3V3_AUX
9
10
HD_ERROR_LED
NOTE: SGPIO1 is responsible for SATA 0~5
LAN_LED_HD1: LAN2 LED Header
Pin
1
2
Signal
LAN2_LED_P
LAN2_LED_N
http://www.tyan.com
18
USB3_HD1
USB2_HD1
FAN_HD1
TYPEA_USB3
2
http://www.tyan.com
19
USB2_HD1: Front USB2.0 Header
Signal
Pin
Pin
Signal
+5V
1
2
+5V
USB DATA1-
3
4
USB DATA2-
USBDATA1+
5
6
USB DATA2+
GND
7
8
GND
KEY
9
10
GND
USB3_HD1: Front USB3.0 Header
Signal
Pin
Pin
Signal
+5V
1
2
P0_RX_N
P0_RX_P
3
4
GND
P0_TX_N
5
6
P0_TX_P
GND
7
8
P0_N
P0_P
9
10
OC_N
P1_P
11
12
P1_N
GND
13
14
P1_TX_P
P1_TX_N
15
16
GND
P1_RX_P
17
18
P1_RX_N
+5V
19
20
Key
TYPEA_USB3: Vertical (Type_A) USB3.0 Connector
Signal
Pin
Pin
Signal
+5V
1
2
USB2.0_DATA_N
USB2.0_DATA_P
3
4
GND
USB3.0_RX_N
5
6
USB3.0_RX_P
GND
7
8
USB3.0_TX_N
USB3.0_TX_P
9
FAN_HD1: Front Fan Connector (Reserved for Barebone)
Signal
Pin
Pin
Signal
TACH1
1
2
TACH6
TACH2
3
4
TACH7
TACH3
5
6
TACH8
TACH4
7
8
TACH9
TACH5
9
10
TACH10
GND
11
12
KEY
PWM2
13
14
PWM1
TACH11
15
16
SMB_DATA
TACH12
17
18
SMB_CLK
VCC3_AUX
19
20
PWM3
http://www.tyan.com
20
COM2
SATA5
SATA4
DBG_HD1
IPMB_HD1
/