Fluidmaster 4T12UCSP10 Installation guide

Brand: Fluidmaster

Model: 4T12UCSP10

Type: Installation guide

Fluidmaster 4T12UCSP10 is a toilet connector that features Click Seal technology, which lets you know when the connector is properly sealed by producing a clicking sound. This prevents overtightening and cracking of the connector nut and fill valve shank. The connector also has stainless steel braiding that provides maximum protection against bursting, with a burst strength of up to 1500 PSI. It is easy to install, with clear instructions provided in the manual. Simply turn off the water supply, remove the old supply connector, and clean all connector threads.

Fluidmaster, Inc. at 30800 Rancho Viejo Road, San Juan Capistrano, CA 92675 (949) 728-2000, Fax (949) 728-2205.

Red/Green color arrangement is a registered trademark of Fluidmaster, Inc.

U.S. and Other Patents Pending.

06/11 FM91233 Rev.2

The "CLICK"

Let's You Know

It's Sealed!

™

Patent pending Click Seal

nut clicks when connector

has proper seal

Click Seal nut won't crack

due to overtightening

Stainless steel braiding

protects against

burst failures

1. Turn off water supply at shutoff valve.

2. Remove old supply connector and clean all connector threads.

3. Thread the metal nut onto the shutoff valve and tighten 1/2 turn beyond hand-tight.

4. Prior to threading plastic nut onto fill valve shank, turn Click Seal nut counter-clockwise

until threads align. Gently turn Click Seal nut clockwise and hand tighten until nut

clicks. The "click" lets you know it’s sealed!

5. Slowly turn on water at the shutoff valve.

6. Carefully check for leaks at shutoff valve. If leak appears, tighten nut just enough to

provide a leak-free joint. Do not overtighten shut off valve.

(Burst) Strength: Up to 1500 PSI Torque Rating: 15-20 in-lbs

INSTALLATION INSTRUCTIONS

Fill Valve

Inlet

Shutoff

Valve

TWIST

SEAL

“CLICK”

Technology You Can Trust - Hear the "click"

and know the toilet connector is properly

sealed and cannot be overtightened

Toilet Connector nut clicks & stops tightening

when connector has achieved a good seal

Prevents overtightening & cracking of

connector nut and fill valve shank

Stainless steel braiding provides maximum

protection against bursting

U.S. and Other Patents Pending

MODEL Shutoff Valve Ballcock CASE PRODUCT DIMENSIONS CASE DIMENSIONS CASE UPC SCCI 2 OF5

NUMBER Connection Connection Length QTY H/W/D (INCHES) H/W/D (INCHES) WEIGHT (LBS) 0 39961 100 39961

B1T09CS 3/8" Compression 7/8" Ballcock 9" 25 1 x 2.5 x 9.5 4.125 x 6.875 x 18 5.5 41181 5 42181 1

B1T12CS 3/8" Compression 7/8" Ballcock 12" 25 1 x 2.5 x 12.5 4.125 x 6.875 x 22 6.5 41182 2 40185 1

B1T16CS 3/8" Compression 7/8" Ballcock 16" 25 1 x 2.5 x 16.5 4.125 x 6.875 x 22 7.5 04336 8 01103 6

B1T20CS 3/8" Compression 7/8" Ballcock 20" 15 1 x 2.5 x 20.5 4.125 x 6.875 x 22 5.8 41184 6 42184 2

B4T09UCS 7/8" Ballcock 9" 25 1 x 2.5 x 9.5 4.125 x 6.875 x 18 6.0 41194 5 41194 2

B4T12UCS 7/8" Ballcock 12" 25 1 x 2.5 x 12.5 4.125 x 6.875 x 22 7.0 41195 2 41195 9

B4T20UCS 7/8" Ballcock 20" 15 1 x 2.5 x 20.5 4.125 x 6.875 x 22 5.0 01197 8 01197 5

3/8" C, 7/16" C,

1/2" C, 1/2" FIP

3/8" C, 7/16" C,

1/2" C, 1/2" FIP

3/8" C, 7/16" C,

1/2" C, 1/2" FIP

Fluidmaster 4T12UCSP10 Installation guide

Fluidmaster 4T12UCSP10 Installation guide

Fluidmaster 4T12UCSP10 Installation guide

Related papers

Other documents