House Grounding Wire
Green Grounding Screw (E)
Fixture Grounding Wire
Wire Nut (C)
Back Plate
Metal Frame
Flathead Screw
Ball Nut (G)
Mounting Screw (B)
Mounting Plate (A)
Outlet Box
Fixture Wire
Lock Nut (F)
Fixture Mounting
Screw (D)
Bulb Type T10 Max. 60W
(not included)
ASSEMBLY AND INSTALLATION
INSTRUCTIONS
NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THESE INSTRUCTIONS.
W0252
Hardware Package (included):
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.
Turn off the power at fuse or circuit box
161012
Green Grounding
Screw (E)
Fixture Mounting
screw (D)
Mounting Screw (B)
Wire Nut (C)
Installation Steps
Lock Nut (F)
Mounting plate (A)
Ball Nut (G)
Turn on the power at fuse or circuit box
161012
Ball Nut (G)
Green Grounding
Screw (E)
Headless
screw (D)
Mounting Screw (B)
Wire Nut (C)
Lock Nut (F)
Mounting plate (A)
The following parts are available for re-order if damaged or missing.
Spare Parts List:
Mounting Hardware
5645MM (1 SET)
A: 4-1/2”
B: 21-1/2”
C: 8”
C
B
C
A
1. Attach the metal frame onto the fixture light and tighten it with the flathead screws.
2. Thread two fixture mounting screws to the mounting plate, and secure them with two lock nuts.
Note: Make sure that the fixture mounting screws are lined up horizontally, to ensure that the fixture will be level.
3. Pull out the source wires from the outlet box. Make wire connections using wire nuts as follows:
---Connect the hot wire (usually black insulation) from the fixture to the black wire from the power source.
---Connect the neutral wire (usually white insulation) from the fixture to the white wire from the power source.
---Attach the fixture grounding wire (usually green insulation or bare wire) to the mounting plate with the green
grounding screw. Then connect it to the house grounding wire with the wire nut.
Carefully put the wires back into the outlet box.
4. Attach the back plate to the mounting plate by inserting the headless screws, then secure it with ball nuts.
5. Install a bulb (not included). See relamping label on socket area or packaging for maximum allowed wattage.
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Cascadia T0252 Installation guide
-
-
-
-
-
-
-
-
-
Other documents
-
Patriot Lighting 130910 Assembly And Installation Instructions
-
Laura Ashley WMY111 User guide
-
-
-
Portfolio WL131MBK Installation guide
-
Kenroy Home 93936BS Operating instructions
-
Kenroy Home 91796CH Operating instructions
-
Allen + Roth VBS271-5CH Installation guide
-
Home Decorators Collection 25705-HBU Installation guide
-
