Cascadia T0335 Installation guide

Cascadia
Brand
Cascadia
Model
T0335
Type
Installation guide

This manual is also suitable for

Cascadia T0335

The Cascadia T0335 is a versatile lighting fixture suitable for various indoor applications. It features:

  • Adjustable height: The threaded pipe allows for customization of the fixture's height to accommodate different ceiling heights and lighting needs.
  • Multiple bulb compatibility: The fixture supports three bulbs, providing ample illumination for larger spaces.
  • Durable construction: Made from sturdy materials, the T0335 ensures longevity and reliability.
  • Decorative design: The fixture's metal frame, decorative cover pad, and finial add aesthetic appeal to any room.

Cascadia T0335

The Cascadia T0335 is a versatile lighting fixture suitable for various indoor applications. It features:

  • Adjustable height: The threaded pipe allows for customization of the fixture's height to accommodate different ceiling heights and lighting needs.
  • Multiple bulb compatibility: The fixture supports three bulbs, providing ample illumination for larger spaces.
  • Durable construction: Made from sturdy materials, the T0335 ensures longevity and reliability.
  • Decorative design: The fixture's metal frame, decorative cover pad, and finial add aesthetic appeal to any room.
170628
NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THESE INSTRUCTIONS.
T0335 / T0336
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.
1. Attach the cross bar unit to the outlet box using two mounting
screws. Adjust the length of the headless screws if
necessary.
2. Pull out the source wires from the outlet box. Make
wire connections using wire nuts as follows:
---Connect the hot wire (usually black insulation)
from the fixture to the black wire from the power
source.
---Connect the neutral wire (usually white insulation)
from the fixture to the white wire from the power
source.
---Attach the fixture grounding wire (usually green
insulation or bare wire) to the cross bar unit with
the preinstalled green grounding screw, and then
connect it to the house grounding wire with the
wire nut.
Carefully tuck the wires back into the outlet box.
3. Attach the ceiling pan to the cross bar unit by
inserting the two headless screws, and then
secure it with two ball nuts.
4. Install three bulbs (not included), check relamping
label at socket area or packaging for maximum
allowed wattage.
5. Screw the threaded pipe into the coupling, a
nd then
secure the preinstalled washer and hex nut.
NOTE: The depth of threaded pipe may need to be adjusted to
properly fit metal frame, decorative cover, decorative pad and
finial.
ASSEMBLY AND INSTALLATION
INSTRUCTIONS
Outlet Box
House Grounding Wire
Fixture Grounding Wire
Wire Nut (C)
Headless Screw
Ceiling Pan
Socket
Coupling
Hex Nut
Threaded Pipe (E)
Metal Frame
Decorative Cover (G)
Finial (I)
Cross Bar Unit (A)
Green Grounding Screw
Mounting Screw (B)
Bulb Type A Max.60W
(not included)
Mounting Screw (B)
Wire Nut (C)
Ball Nut (D)
Cross Bar Unit (A)
Washer
Ball Nut (D)
Decorative Pad (H)
Hex Nut (F)
Hardware Package (included):
Turn off the power at fuse or circuit box.
Installation Steps
Threaded pipe (E)
Hex Nut (F)
Decorative Cover (G) Decorative Pad (H)
Finial (I)
A
B
A
B
170628
6. Attach the metal frame to the ceiling pan by inserting the threaded pipe, and then slip up the decorative cover pad with
the open side facing downward through the threaded pipe, and then secure them with the hex nut.
7. Slip up the decorative pad through the threaded pipe, and then secure it with the finial.
Note: Make sure that the decorative pad and the metal frame is side to side during installing decorative pad.
Turn on the power at fuse or circuit box.
A: 14"
B: 6-1/4"
T0336T0335
The following parts are available for re-order if damaged or missing.
Spare Parts List:
Mounting Hardware
5730MM (1 SET)
Assembly Kit
5519MM (1 SET)
Glass Panel
9902CS
Mounting Screw (B)
Wire Nut (C)
Ball Nut (D)
Cross Bar Unit (A)
Threaded pipe (E)
Decorative Cover (G)
Decorative Pad (H) Finial (I)
Hex Nut (F)
  • Page 1 1
  • Page 2 2

Cascadia T0335 Installation guide

Cascadia
Brand
Cascadia
Model
T0335
Type
Installation guide
This manual is also suitable for

Cascadia T0335

The Cascadia T0335 is a versatile lighting fixture suitable for various indoor applications. It features:

  • Adjustable height: The threaded pipe allows for customization of the fixture's height to accommodate different ceiling heights and lighting needs.
  • Multiple bulb compatibility: The fixture supports three bulbs, providing ample illumination for larger spaces.
  • Durable construction: Made from sturdy materials, the T0335 ensures longevity and reliability.
  • Decorative design: The fixture's metal frame, decorative cover pad, and finial add aesthetic appeal to any room.
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents