Cascadia T0155 Installation guide

Brand: Cascadia

Model: T0155

Type: Installation guide

Cascadia T0155 is a versatile and stylish lighting fixture that can elevate the ambiance of any room. This ceiling-mounted light features a sleek metal frame and clear glass panels, allowing for ample light distribution. Installation is a breeze with the included hardware and detailed instructions. The adjustable mounting strap ensures a secure fit on various ceiling surfaces, making it suitable for both residential and commercial applications. The T0155 is compatible with Type A bulbs up to 60 watts, providing ample illumination for any space.

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. READ AND SAVE THESE INSTRUCTIONS.

T0155

Turn off the power at fuse or circuit box.

141225

Page 1

Mounting Strap (A)

Short Screw (B)

Green Grounding

Screw (C)

Lock Nut (F)

Wire Nut (E)

Hardware Package (included):

Assembly Instructions:

1. Thread two long screws to the mounting strap, and secure

with two lock nuts. Adjust the length of the long screws if

necessary.

2. Attach the mounting strap to the outlet box using two short

screws.

3. Pull out the source wires from the outlet box. Make wire

connections using wire nuts as follows:

---Connect the hot wire (usually black insulation) from the

fixture to the black wire from the power source.

---Connect the neutral wire (usually white insulation) from

the fixture to the white wire from the power source.

---Attach the fixture grounding wire (usually bare wire) to the

mounting strap with the green grounding screw, then

connect it to the house grounding wire with a wire nut. If your

outlet box does not have a house grounding wire, then wrap

the fixture grounding wire around the green grounding screw.

Carefully put the wires back into the outlet box.

Long Screw (D)

Socket

Set screw

Ball Nut(G)

Canopy

Outlet Box

House Grounding Wire

Wire Nut (E)

Short Screw (B)

Mounting Strap (A)

Green Grounding Screw (C)

Lock Nut (F)

Long Screw (D)

Bulb Type A Max.60W

(not included)

Bottom

Glass Panel

Side Glass Panel

Side Glass

Panel

Ball Nut (G)

Metal Frame

Bottom Glass panel

“L” Slot

Metal Stop

“S” Clip

Fig.1

Fig.3

Fig.2

WARNING: Turn off the main power at circuit breaker before installing fixture.

AVERTISSEMENT: Coupez la source d’alimentation principale au panneau

central de disjoncteurs avant d’installer le luminaire.

Mounting Hardware

5164MM(1SET)

Glass Panel

9644CS(6PCS)

The following parts are available for re-order if damaged or missing.

141225

Page 2

A: 12"

B: 4-3/4"

Mounting Strap (A)

Short Screw (B)

Green Grounding

Screw (C)

Wire Nut (E)

Long Screw (D)

Lock Nut (F)

Ball Nut (G)

4. Attach the canopy to the mounting strap: insert the long screws through the two holes, and secure it with two ball nuts.

CAUTION: With silicone caulking compound, caulk completely around where back of canopy meets with the ceiling

surface to prevent water from seeping into the outlet box.

5. Install bulbs (not included). See relamping label at socket area or packaging for maximum allowed wattage.

6. Place the bottom glass panel into the metal frame, and set the six "S" clips on the slot and fix the bottom glass panel

by inserting the side glass panels onto the “S”clips, then press the top clips of the metal frame to secure the side

glass panels. (See Fig 1. / Fig 2. / Fig 3.)

7. Attach the metal frame to the ceiling pan by locationg set screws into the “L” slots, then turn it clockwise until it is locked

in place.

Turn on the power at fuse or circuit box.

Cascadia T0155 Installation guide

Cascadia T0155 Installation guide

Cascadia T0155 Installation guide

Related papers

Other documents