Apollo 901 (T2000) User manual

Apollo
Brand
Apollo
Model
901 (T2000)
Type
User manual

This manual is also suitable for

Pager 901
Manual Programming Instructions
English
1
SPET1
Move out the Battery first, Press and
Hold " "
SPET2
Insert Battery, wait abou 5 seconds
until display is on and shows "Pass
word 0000" on the display, use " "
button to change the figures and "
" to move positions, or remain the
password, then press " " to show
"Frequency".
SPET3
•FREQUENCY
Displaying "Frequency xxx.xxx", use
" " button to change the figyres and
" " to move positions. Then pressing
" " to conrm.
Manual Programming
2
•CAPCODE
Set up capcod, use " " button
to change the figures and " " to
move positions, when uou complete
setting up each capcode, please also
press " " button to set up the next
capcode. Use " " button to choose
"ON" or "--"(OFF).
1.xxxxxxx ON
2.xxxxxxx ON (or--)
3.xxxxxxx ON (or--)
4.xxxxxxx ON (or--)
When you complete setting up 4
capcodes, please also press " " key
for next step.
•BAUD
Can be changed baud rate between
512, 1200 or 2400 by pressing " ",
Finish by pressing " "button.
2
Manual Programming
3
•MODIFYPASSWORD
Can be changed password by
pressing " ", then conrm by " ".
•PASS
When pass shows, it means program
is done. Remove battery to turn on
pager.
Manual Programming
Make sure to read this manual before using the
machine. Please keep it in hand for future reference.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

Apollo 901 (T2000) User manual

Apollo
Brand
Apollo
Model
901 (T2000)
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents