INSTALLATION GUIDE
SMART LEARNING SUITE 17.1
4 smarttech.com/kb/171154
Minimum hard disk
space
4.7 GB
Other requirements Microsoft®.NET Framework 4.5.1 for SMARTNotebook software and
SMARTInk
MicrosoftVisual Studio® Tools 2010 for Office for SMARTInk
AdobeReader® 8.0 or later
DirectX® technology 10 or later for SMARTNotebook software
DirectX 10 compatible graphics hardware for SMARTNotebook
software
Internet Explorer® Internet browser 8 or later
Internet access to download SMART software
IMPORTANT
l Some features require access to specific web sites. You might need to white list those web
sites if your network restricts outbound Internet access.
l For a complete list of websites to white list see SMART knowledge base article SMART
Notebook add-ons behave unexpectedly behind a firewall or proxy.
l All prerequisite third-party software is built into the EXE file and is automatically installed in
the correct order if you deploy the EXE file.
l The required Microsoft.NET Framework and MicrosoftVisual Studio Tools 2010 for Office
prerequisites will be installed automatically when you run the EXE file.
Deploying the software
If you’re an IT administrator and you want to deploy the software to multiple computers, see the
SMART Learning Suite 17.1 system administrator’s guide (smarttech.com/kb/171152).
Installing the software
You can install SMART Learning Suite using the complete installer or the web-based installer. The
following table explains the differences between the two installers.
Feature Complete installer Web-based installer
Intended use Installing all or most SMART
Learning Suite software on
computers that might not have
Internet access
Installing some SMART Learning
Suite software on computers
that have Internet access