smarttech.com/kb/171302
Trademark notice
SMARTNotebook, SMARTInk, smarttech, the SMART logo and all SMART taglines are trademarks or registered trademarks of SMARTTechnologiesULC in the
U.S. and/or other countries. Microsoft, Windows, Internet Explorer, ActiveX, DirectX and Visual Studio are either registered trademarks or trademarks of Microsoft
Corporation in the U.S. and/or other countries. Adobe Reader is a registered trademark or trademark of Adobe Systems Incorporated in the U.S. and/or other
countries. All other third-party product and company names may be trademarks of their respective owners.
Copyright notice
© 2018SMARTTechnologiesULC. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or
translated into any language in any form by any means without the prior written consent of SMARTTechnologiesULC. Information in this manual is subject to change
without notice and does not represent a commitment on the part of SMART.
This product and/or use thereof covered by one or more of the following U.S. patents.
www.smarttech.com/patents
09/2018
INSTALLATION GUIDE
SMART LEARNING SUITE 18
3 smarttech.com/kb/171302
Getting started
This guide explains how to install the following software using the SMART Learning Suite Installer:
l SMARTNotebook® 18 collaborative learning software
l SMART Product Drivers 12.10
l SMARTInk ®5.3
This guide is intended for teachers, IT administrators and others who are responsible for installing
software on teachers’ computers.
To use this guide, you must have access to the installation files through the Internet.
IMPORTANT
If SMART Response is currently installed, updating to SMART Notebook 18 will replace SMART
Response with the new SMART response 2 assessment tool. Please review the details to ensure
it will not disrupt current teacher work flows. Existing assessment data may need to be backed
up. For more information see the SMART response 2 FAQs .
Computer requirements
NOTE
Operating systems and other third-party software released after this SMART software might not
be supported.
Before you install the software, ensure your teachers’ computers meet the minimum requirements:
General
Supported
operatingsystems
Windows 10
Windows 8.1
Windows 7 SP1 (with Platform Update KB2670838 and Security
Update KB4012215, or any future update that supersedes it).
Minimum hard
disk space
4.7 GB
INSTALLATION GUIDE
SMART LEARNING SUITE 18
4 smarttech.com/kb/171302
Minimum specs for standard and high definition displays (up to 1080p and similar)
Minimum
processor
Intel® Core™ 2 Duo
Minimum RAM 2 GB
Minimum specs for ultra high definition displays (4K)
Minimum graphics
card
Integrated
1
GPU
Minimum
processor
With integrated* GPU: Intel Core i3
With discrete GPU: Intel Core 2 Duo
Minimum RAM 4 GB
Recommended specs for ultra high definition displays (4K)
Recommended
graphics card
Discrete GPU
Recommended
processor
Intel Core i3
Recommended
RAM
8 GB
Other requirements
Programs Microsoft®.NET Framework 4.5.1 for SMART Notebook software and
SMARTInk
MicrosoftVisual Studio® Tools 2010 for Office for SMARTInk
AdobeReader® 8.0 or later
DirectX® technology 10 or later for SMARTNotebook software
DirectX 10 compatible graphics hardware for SMARTNotebook
software
Web access Internet Explorer® Internet browser 8 or later
Internet access to download SMART software
*Any integrated GPU capable of 4K will meet our minimum requirements if the GPU has dual-
channel memory configured.
1
Any integrated GPU capable of 4K will meet our minimum requirements if the GPU has dual-channel memory configured.
INSTALLATION GUIDE
SMART LEARNING SUITE 18
5 smarttech.com/kb/171302
IMPORTANT
l Some features require access to specific web sites. You might need to white list those web
sites if your network restricts outbound Internet access.
l For a complete list of websites to white list see SMART knowledge base article SMART
Notebook add-ons behave unexpectedly behind a firewall or proxy.
l All prerequisite third-party software is built into the EXE file and is automatically installed in
the correct order if you deploy the EXE file.
l The required Microsoft.NET Framework and MicrosoftVisual Studio Tools 2010 for Office
prerequisites will be installed automatically when you run the EXE file.
Deploying the software
If you’re an IT administrator and you want to deploy the software to multiple computers, see the
SMART Learning Suite 18 system administrator’s guide (smarttech.com/kb/171304).
Installing the software
You can install SMART Learning Suite 18 using the complete installer or the web-based installer.
The following table explains the differences between the two installers.
Feature Complete installer Web-based installer
Intended use Installing all or most SMART
Learning Suite software on
computers that might not have
Internet access
Installing some SMART Learning
Suite software on computers
that have Internet access
SMART Learning Suite
software included in the
installer
All software except Gallery
collections and language packs
No software
SMART Learning Suite
software downloaded
during installation
Gallery collections and
language packs
All software
Available for download
from the SMART website
Yes Yes
Download size 785 MB 26 MB
Using the complete installer
You can start the complete installer by downloading the complete installer from the SMART
website.
INSTALLATION GUIDE
SMART LEARNING SUITE 18
6 smarttech.com/kb/171302
To download and start the complete installer from the website
1. Go to https://education.smarttech.com/en/products/notebook/download#admin.
2. Select SMART Notebook 18 from Select your version.
3. Select Windows from Change operating system.
4. Select USB Installer from Select install package.
5. Click DOWNLOAD - WINDOWS.
6. Save the smart18-0usb.exe download file to your computer.
NOTES
l If you install the software without a valid Product Key you’ll receive a 45-day trial.
l For further information see, the SMART Learning Suite webpage.
To install the software using the complete installer
1. Start the complete installer as described in the previous procedure.
The SMART Learning Suite 18 Installer window appears.
NOTES
o
SMART recommends installing the Standard Installation/Upgrade, it will install SMART
Notebook, SMART lab, SMART response 2, SMART Ink, and SMART Product Drivers.
o
The Standard Installation or Upgrade will also install Gallery Essentials and Lesson
Activity Toolkit.
o
If you would like to customize the installation or upgrade of SMART software, select
Customize.
2. Select the terms of use link.
The License Agreement window appears.
3. Review the terms in software license agreement, and click Close.
4. If you accept the terms, select I have read the accept the terms of use check box.
5. Click Next.
The installation proceeds.
6. Once the installation is complete, click Finish.
INSTALLATION GUIDE
SMART LEARNING SUITE 18
7 smarttech.com/kb/171302
Using the web-based installer
You can download the web-based installer from the SMART website, and then double-click the
downloaded file to begin the installation.
To download and start the web-based installer
1. Go to https://education.smarttech.com/en/products/notebook/download#students.
2. Choose a Download Type.
3. Enter your information into the following fields:
a. First Name
b. Last Name
c. Job Title
d. Email
e. Country
4. Select the service agreement check box.
5. Select Windows under Change operating system.
6. Click DOWNLOAD - WINDOWS.
7. Save the file to a temporary location.
8. Browse to and double-click the file.
The SMART Learning Suite Installation Wizard appears.
NOTES
o
If you install the software without a valid Product Key you’ll receive a 45-day trial.
o
For further information see, theSMART Learning Suite webpage.
To install the software using the web-based installer
1. Start the web-based installer as described in the previous procedure.
The SMART Learning Suite 18 Installer window appears.
NOTES
o
SMART recommends installing the Standard Installation/Upgrade, it will install SMART
Notebook, SMART lab, SMART response 2, SMART Ink, and SMART Product Drivers.
INSTALLATION GUIDE
SMART LEARNING SUITE 18
8 smarttech.com/kb/171302
o
The Standard Installation or Upgrade will also install Gallery Essentials and Lesson
Activity Toolkit.
o
If you would like to customize the installation or upgrade of SMART software, select
Customize.
2. Select the terms of use link.
The License Agreement window appears.
3. Review the terms in software license agreement, and click Close.
4. If you accept the terms, select I have read the accept the terms of use check box.
5. Click Next.
6. The SMART Notebook Activation window appears with selections (select the option that
applies to your settings):
o
Start Trial/Using existing license
Or
o
Enter Key
7. Click Next.
The installation proceeds.
8. Once the installation is complete, click Finish.
Uninstalling the software
You can uninstall SMART Learning Suite 18 from individual computers using the SMART Uninstaller
user interface.
To uninstall SMART Learning Suite 18 using the SMART Uninstaller user interface
1. In Windows 7 operating system, select Start > AllPrograms > SMARTTechnologies > SMART
Tools > SMART Uninstaller.
Or
In Windows 8.1 operating system, go to the Apps screen and then scroll to and select
SMARTTechnologies > SMARTUninstaller.
Or
In Windows 10 operating system, select Start > All apps, and then scroll to and select
SMARTTechnologies> SMARTUninstaller.
2. ClickNext.
INSTALLATION GUIDE
SMART LEARNING SUITE 18
9 smarttech.com/kb/171302
3. Select the check boxes of the SMART software and supporting packages that you want to
uninstall, and then click Next.
NOTES
o
Some SMART software is dependent on other SMART software. If you select this
software, SMART Uninstaller automatically selects the software on which it depends.
o
SMART Uninstaller automatically uninstalls any supporting packages that are no longer
being used.
o
If you choose to uninstall all SMART software, SMART Uninstaller automatically
uninstalls all supporting packages, including itself.
TIPS
o
To select all software and supporting packages, pressSelect All.
o
To clear the selection of all software and supporting packages, pressClear All.
4. PressUninstall.
SMART Uninstaller uninstalls the selected software and supporting packages.
5. PressFinish.
/