88 5559 80
Arm Chair with Cushion
Head Cap Bolt
4 pcs.(+1 extra)
Short Bolt
2 pcs.(+1 extra)
Flat
Washer
4 pcs.(+1 extra)
A.
Back Panel
1 pc.
B.
Seat
1 pc.
C.
Arm
1 pc.
D.
Arm
1 pc.
F.
Cushion
1 pc.
E.
Stretcher
1 pc.
Part List
Hardware List
Home Styles Consumer Assistance: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Bolt
4 pcs.(+1 extra)
Key Wrench
1 pc.
Nut
4 pcs.(+1 extra)
Nut Cap
4 pcs.(+1 extra)
IMPORTANT NOTE
This product is made of sturdy, high quality aluminum
and will provide years of enjoyment. Do not use power tools
to assemble and only tighten bolts until they are snug.
Over tightening can cause damage to the aluminum.
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the parts.
We have taken great care in the design of this product and
request that you carefully and strictly follow our assembly
instructions to ensure a completed product as it was designed.
Assembly Instructions
STEP 2
Attach Stretcher (E) to unit with Bolts.
Place Cushion (F) onto seat.
Use the tie-downs on Cushion (F)
to attach to chair.
F
E
STEP 1
Attach Arm (C) and Seat (B) to
Back Panel (A) with Short Bolt, Bolts,
Flat Washers, Nuts and Cap Nuts.
Attach Arm (D) to unit with
Short Bolt, Bolts, Flat Washers,
Nuts and Cap Nuts.
A
C
D
B
Please keep the Key Wrench as you may need to retighten the Bolts in the future.
Short Bolt
Bolt
Flat Washer
Nut
Cap Nut
Head Cap Bolt
IMPORTANT
* Do not use power tools to assemble and do not overtighten the bolts.
* Do not tighten up all the bolts until each part is properly assembled.
* You should keep Key Wrench in a safe place as you may need to tighten up the Nuts in the future.
* Use a soft cloth between these part and the floor.
/
