PART LIST QUANTITY
A 1 PC
B 1 PC
C 1 PC
D 1 PC
E 6 PCS + 1 PC
F 2 PCS + 1 PC
G 8 PCS + 1 PC
H 1 PC
I 1 PC
J 1 PC
SEAT CUSHION
BACK
SHORT BOLT
(M6*18MM)
LONG BOLT
(M6*40MM)
ALLEN WRENCH
BACK CUSHION
SAVE THESE INSTRUCTIONS
INSTRUCTIONS
ASSEMBLE ON A FLAT, PROTECTED SURFACE.
FIGURE
FLAT WASHER
DESCRIPTION
RIGHT ARM
LEFT ARM
SEAT
STEP 3
A. ROTATE ASSEMBLED UNIT TO THE
STANDING POSITION.
B. CONNECT BACK (C) TO RIGHT ARM (A)
AND LEFT ARM (B) WITH SHORT BOLTS (E),
LONG BOLTS (F), AND FLAT WASHERS (G)
USING ALLEN WRENCH (H). DO NOT
TIGHTEN COMPLETELY.
C. COMPLETELY TIGHTEN ALL BOLTS (E &
F) WITH ALLEN WRENCH (H) FROM STEPS
1-3.
STEP 2
A. ROTATE ASSEMBLED UNIT TO HAVE
RIGHT ARM ON FLAT, PROTECTED
SURFACE.
B. CONNECT LEFT ARM (B) TO SEAT (D)
WITH SHORT BOLTS (E) AND FLAT
WASHERS (G) USING ALLEN WRENCH (H).
DO NOT TIGHTEN COMPLETELY.
STEP 1
A. PLACE SEAT (D) ON A FLAT PROTECTED
SURFACE WHILE HOLDING IT ON ITS SIDE
AS SHOWN.
B. CONNECT RIGHT ARM (A) TO SEAT (D)
WITH SHORT BOLTS (E) AND FLAT
WASHERS (G) USING ALLEN WRENCH (H).
DO NOT TIGHTEN COMPLETELY.
STEP 4
A. PLACE SEAT CUSHION (J) ON SEAT (D)
AND ATTACH WITH TIES TO BACK
CROSSBAR.
B. PLACE BACK CUSHION (I) ON CHAIR.
C. ASSEMBLY IS COMPLETE.
** WE RECOMMEND THAT YOU SAVE THE ALLEN WRENCH AND PERIODICALLY TIGHTEN ALL
BOLTS.
WEIGHT LIMIT
CHAIR: 250 LBS
/
