Home Styles 5562-3486 Operating instructions

Type
Operating instructions
88 5562 80
Arm Chair
Home Styles Consumer Assistance : www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Hardware List
Part List
Tools required for assembly : Phillips Slottedscrewdriver and screwdriver
This product is made from sturdy, high quality aluminum
and will provide years of enjoyment. Do not use power tools
to assemble and only tighten bolts until they are snug.
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damage occurring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure
a completed product as it was designed.
IMPORTANT NOTE
Bolt
4 pcs. (+1 extra)
Flat Washer
4 pcs. (+1 extra)
Key Wrench
1 pc.
Nut
4 pcs. (+1 extra)
Nut Cap
4 pcs. (+1 extra)
Short Bolt
2 pcs. (+1 extra)
A.
Back Panel
1 pc.
B.
Seat
1 pc.
C.
Arm
1 pc.
D.
Arm
1 pc.
F.
Cushion
1 pc.
E.
Stretcher
1 pc.
Head Cap Bolt
4 pcs. (+1 extra)
Assembly Instructions 2/2
IMPORTANT
* Please keep Key Wrench in a safe place as you may need to tighten up the Nuts in the future.
* Use a soft cloth between these parts and the floor.
* Do not use power tools to assembly and do not tightening the bolts and nuts.
* Do not tighten up all the bolts and nuts until each part is properly assembled.
STEP 2
Attach Stretcher (E) to unit with Bolts.
Place Cushion (F) onto seat.
Use the tie-downs on Cushion (F)
to attach to chair.
F
E
STEP 1
Attach Arm (C) and Seat (B) to
Back Panel (A) with Short Bolt, Bolts,
Flat Washers, Nuts and Cap Nuts.
Attach Arm (D) to unit with
Short Bolt, Bolts, Flat Washers,
Nuts and Cap Nuts.
A
C
D
B
Short Bolt
Bolt
Flat Washer
Nut
Cap Nut
Head Cap Bolt
  • Page 1 1
  • Page 2 2

Home Styles 5562-3486 Operating instructions

Type
Operating instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI