2. Home
  3. Home security & automation
  4. Security camera accessories
  5. Vicon
  6. Cruiser SN673V-B

Vicon Cruiser SN673V-B User manual

  • Hello! I am an AI chatbot trained to assist you with the Vicon Cruiser SN673V-B User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
HEATER KIT INSTALLATION
S660V-P
SN663V-A
1. Remove the PTZ Module to install a Heater
board.
2. Check the Power cable.
3. Assemble the Heater board to two bosses (A)
with screws.
4. Place the Heater in the slot (B).
5. Plug the Power connector to the socket of
the Heater board.
6. Heater cable should be placed away from
the Main board.
7. Assemble the PTZ Module.
8.
24 VAC is required to use for the
camera power for stable operation with
Heater kit.
* POWER
Use Certied / Listed Class 2 power source only.
* HEATER (IF APPLICABLE)
Power Supply
Power Consumption
Heater ON
Heater OFF
24 VAC
10 W
at 59 F(15 C)
at 77 F(25 C)
50303893A
Vicon Industries Inc. 631-952-2288 800-645-9116
www.vicon-security.com
Follow these steps to install the S660-HAH heater.
/