Seville Classics OFF65878 Assembly Instructions

Type
Assembly Instructions
Safety
personal injury.
2
5
the
STEP 1. Remove AIRLIFT® DESK (A) from box and set on flat table.
AIRLIFT® DESK (A).
STEP 3.
Flip TRAY (C) upside down.
BRACKETS (B) to underside of TRAY (C)
with SCREWS (G) and ALLEN WRENCH (E).
STEP 2.
DO NOT place devices on desk edge.
DO NOT route wires through desk legs.
DO NOT
MAKE SURE devices have cables long enough for
the full-range (15 in/38 cm) of height-adjustment.
E
C
B
G
A
Tighten bolts clockwise with included ALLEN WRENCH (E).
Organize loose cables with included ZIP TIES (D) .
ALWAYS Route your cables through the REAR of the desk.
NEVER Route cables through the legs of the desk.
Cable Management
: DO NOT PLACE HANDS ON
DESK LEGS. MOVING PARTS CAN CRUSH.
WIRE CLIPS (F) to back of the crossbar.
Use these clips to route cables from keyboards, mice and monitors through the REAR of the desk.
3 4
STEP 4. Hook BRACKETS (B) over the bolts on the inner legs of the AIRLIFT® DESK (A).
STEP 5.
STEP 6. Place your belongings on the desktop to finish!
D
F
E
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Seville Classics OFF65878 Assembly Instructions

Type
Assembly Instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI