2. Brasstech
  3. 120/04

Brasstech 120/04 Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Brasstech 120/04 Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
1. Disconnect and remove existing flange / strainer assembly from drain pipe.
2. Place the drain flange in sink hole.
3. Attach flange nut to underside of flange, using o-ring and washer to seal the
sink hole.
4. Test seal by engaging strainer into flange and adding water. Make adjustments as required.
5. Attach flange to existing tailpiece drain pipes with slip nut provided. Remove strainer from
flange and drain water from the sink.
INSTALLATION INSTRUCTIONS
LARGE BASKET STRAINER
MODEL No's: 120
Strainer
Drain Flange
Sink
O-ring
Washer
Flange Nut
Slip Nut
(949) 417-5207
BRS-120 Santa Ana, Ca. 92705 6/10/2011
www.brasstech.com
Recommended installation by a Professional Plumbing Contractor
/