2. Newport Brass
  3. 121/10B
121/10B

Newport Brass 121/10B Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Newport Brass 121/10B Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
1. Disconnect and remove existing flange / strainer assembly from drain
pipe.
2. Apply putty material between contact surface of drain flange and
sink hole. Place the drain flange in sink hole.
3. Tighten flange nut to underside of flange, using o-ring and washer.
4.Attach flange to existing tailpiece drain pipes with slip nut provided.
5. Test seal by engaging strainer into flange and adding water. Make adjustments as required.
Remove strainer from flange and drain water from the sink.
INSTALLATION INSTRUCTIONS
LARGE BASKET STRAINER
MODEL No's: 121
Strainer
Drain Flange
Sink
O-ring
Washer
Flange Nut
Slip Nut
(949) 417-5207
BRS-121 Santa Ana, Ca. 92705 6/10/2011
www.brasstech.com
Recommended installation by a Professional Plumbing Contractor
/