Enelion Lumina User guide

Type
User guide

Enelion Lumina is a premium charger for electric vehicles that offers a range of features to enhance the charging experience. With its user-friendly interface, you can easily authorize charging sessions using RFID tags and monitor your charging history. Additionally, the mobile app connectivity allows you to remotely schedule charging sessions, start or stop charging, and access other advanced features, providing you with greater control and convenience.

Enelion Lumina is a premium charger for electric vehicles that offers a range of features to enhance the charging experience. With its user-friendly interface, you can easily authorize charging sessions using RFID tags and monitor your charging history. Additionally, the mobile app connectivity allows you to remotely schedule charging sessions, start or stop charging, and access other advanced features, providing you with greater control and convenience.

Quick start
guide
LUMINA
Premium charger for electric vehicles.
Dear
User
Congratulations on your purchase of the Enelion charger
and thank you for your trust.
Please read this manual carefully before using the charger
for the rst time.
Up-to-date manuals for users
always available at:
enelion.com/en/help
Copyright, Enelion Sp. z o. o.
The manual may change as the product develops.
The information provided may not be correct. All rights reserved.
Revision: V 1
Number of pages: 16
Released: May 10, 2022
Important information 4
Quick start 5
If you want to use RFID
tag to authorize 6
Conguration panel 12
Table of content
Important
information
Please read this manual before attempting to
commission the charger.
Safety instructions
Never use or touch the device if it is damaged
or not functioning properly.
Always perform recommended maintenance,
installation and any repair work by an
authorised service centre and in accordance
with local requirements.
In case of re occurs, do not extinguish with
water.
Never clean the station with high pressure or
running water.
Do not immerse the station in water or other
liquids.
If the light bar lights up red, it indicates an
error. Please refer to the User Manual for
troubleshooting.
Never touch the electrical contacts of the type
2 socket/plug and never insert foreign objects
into it.
Never use the charging cable if it is damaged
or if the connector is wet or dirty.
Charging-cable should only be disconnected
from the station by pulling on the connector’s
handle. Do not pull directly by the cord.
Make sure the charging cable is not posing a
threat of a person tripping or car running over
Even though the station is designed to
withstand normal weather conditions, it
is recommended to protect it from direct
sunlight or exposure to extreme weather
conditions.
Do not use the station near strong
electromagnetic elds or in the immediate
vicinity of radio transmitters.
4
Quick start Use the cable
to connect
your car
to the charger.
With default
settings used,
charging starts
immediately.
5
If you want to
use RFID tag
to authorize,
please follow
these steps
Connect
to charger’s
hotspot using
a network ID
featuring “Enelion
01
02 Connect to
conguration
panel by typing
“192.168.8.8” into the
browser’s address bar
01.1 Enter the
password
from the sticker
on the head
7
0403 Log in to
conguration
panel. Default
credentials
are admin/admin
Put the RFID
card against
the top lid
of the charger
8
05 Go to the
Charger ->
Authorization
section and nd your
card in RFID Cards’
History section
9
06 Use “+”
to add a card
to an Ofine
Authirized
Cards’ group
10
07 Disable
Freecharge
mode
11
To remotely use functions such as charge
scheduling, start / stop, remote power-plug relay
and others, install the dedicated mobile Enelion
Lumina App on your smartphone.
Mobile App
Enelion Lumina App available on
Access to the
conguration
panel
01
13
Notes
Notes
14
Customer service
Download the latest user manuals, useful
documents and video tutorials of your product
for your product on enelion.com
THIS DOCUMENT CONTAINS INFORMATION
THAT MAY BE SUBJECT TO CHANGE
WITHOUT NOTICE.
© 2022 ENELION
50 Pana Tadeusza St
, 80-123 Gdańsk, Poland
enelion.com/en/help
In addition to the steps described on the
previous pages, we recommend watching the
installation videos.
ENELION sp. z o.o. | 50 Pana Tadeusza St
80–123 | Gdańsk | Poland
enelion.com
Copyright, Enelion Sp. z o. o.
The manual may change as the product develops.
The information provided may not be correct. All rights reserved.
Revision: V 1
Number of pages: 16
Released: May 10, 2022
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16

Enelion Lumina User guide

Type
User guide

Enelion Lumina is a premium charger for electric vehicles that offers a range of features to enhance the charging experience. With its user-friendly interface, you can easily authorize charging sessions using RFID tags and monitor your charging history. Additionally, the mobile app connectivity allows you to remotely schedule charging sessions, start or stop charging, and access other advanced features, providing you with greater control and convenience.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI