DIAMOND PROTECH Diamond Interior User guide

Diamond Interior

Brand: DIAMOND PROTECH

Model: Diamond Interior

Type: User guide

DIAMOND PROTECH Diamond Interior is a revolutionary interior surface protectant that restores and enriches your car's vinyl, plastic, and trim. Its advanced nanotech formula provides up to 12 months of UV, water, and stain resistance, ensuring your vehicle's interior stays pristine. Diamond Interior is easy to apply, simply apply a small amount to a foam applicator and spread evenly across the desired surface. Buff with a clean microfiber towel to remove any excess residue and allow 30 minutes for the coating to cure. Your car will be ready for use after 30 minutes.

DIAMOND PROTECH Diamond Interior is a revolutionary interior surface protectant that restores and enriches your car's vinyl, plastic, and trim. Its advanced nanotech formula provides up to 12 months of UV, water, and stain resistance, ensuring your vehicle's interior stays pristine. Diamond Interior is easy to apply, simply apply a small amount to a foam applicator and spread evenly across the desired surface. Buff with a clean microfiber towel to remove any excess residue and allow 30 minutes for the coating to cure. Your car will be ready for use after 30 minutes.

DIAMOND

INTERIOR

NANODIAMOND COATING TECHNOLOGY

NANODIAMOND

COATING

Plastic/Vinyl/Synthetic Material Protection

Diamond Interior is formulated for interior surfaces

such as vinyl, plastic and trim.

Diamond Interior will restore and enrich vehicle interior

surfaces while providing up to 12 months of UV, water,

and stain resistance.

APPLICATION INSTRUCTIONS

APPLICATION – APPLICATION TIME: 15 min | 1 LAYER | CURE TIME: 30 min

BEFORE APPLYING - CLEANING AND DECONTAMINATION

Clean all plastic, vinyl and rubber elements of the car with an

appropriate degreasing product. Make sure to use products which

are wax free and do not form any protective lm on the surface

treated.

Shake well for 15 seconds and

then apply a small amount

(approximate size of 2

Quarters/50 Euro cent coins) of

Diamond Interior on a foam

applicator.

Using even cross hatch

movements, apply Diamond

Interior to 1-2 elements at a

time. Work horizontally and

then cover vertically across the

entire surface.

Follow up immediately to polish

the treated surfaces with a

clean microber towel to level

and evenly spread the coating,

taking care to remove any

excess residue in the process.

Repeat procedure till all

elements are coated.

30 min after application the

car is ready for exploitation.

Wipe down with Diamond Body Prep and a microber towel to

remove any residues left from the cleaning product used. Allow

the surface to dry completely before application of Diamond

Interior.

PRECAUTIONS

Apply in temperatures not less than

10C/50F degrees.

Apply when air humidity does not exceed

70%.

If accidentally applied to fabric details,

clean up immediately as long exposure of

Diamond Interior on fabric can leave

grease/oily stain.

APPLICATION TIPS

Diamond Interior is best applied to

plastic, vinyl and rubber elements.

Use an additional light source to control

your work when polishing treated

surfaces.

WHAT YOU’LL NEED

- 2 Microber Towels

- Sponge Applicator

- Diamond Body Prep

- Protective Gloves

1

DIAMOND PROTECH Diamond Interior User guide

Diamond Interior

Brand: DIAMOND PROTECH

Model: Diamond Interior

Type: User guide

DIAMOND PROTECH Diamond Interior is a revolutionary interior surface protectant that restores and enriches your car's vinyl, plastic, and trim. Its advanced nanotech formula provides up to 12 months of UV, water, and stain resistance, ensuring your vehicle's interior stays pristine. Diamond Interior is easy to apply, simply apply a small amount to a foam applicator and spread evenly across the desired surface. Buff with a clean microfiber towel to remove any excess residue and allow 30 minutes for the coating to cure. Your car will be ready for use after 30 minutes.

Related papers

Other documents