2. DIAMOND PRO TECH
  3. Diamond Wheels
Diamond Wheels

DIAMOND PRO TECH Diamond Wheels Operating instructions

  • Hello! I've reviewed the user manual for the Diamond Wheels nanodiamond coating. It provides instructions on how to apply the coating for wheel protection against brake dust and road grime. The document details application temperatures, curing times, and the required products. I am ready to answer your questions about it.
  • What temperature range is recommended for application?
    What is the recommended humidity for application?
    How long does it take to cure at room temperature?
    How to prepare the wheels before application?
    How long to wait to polish off excess with a microfiber towel?
DIAMOND
WHEELS
NANODIAMOND COATING TECHNOLOGY
NANODIAMOND
COATING
Beautify and Protect Your Wheels
Diamond Wheels nanodiamond coating is resistant to
high temperature exposure while providing all the
benets of a paintwork coating. With proper
preparation, Diamond Wheels will provide up to 12
months of brake dust and road grime protection and
make your wheels always stand out!
APPLICATION INSTRUCTIONS
APPLICATION – APPLICATION TIME: 20/30 min | 1 LAYER
BEFORE APPLYING - CLEANING AND DECONTAMINATION
Apply Diamond Body Prep or isopropyl alcohol to the wheel disks to
ensure they are clean and degreased.
Prepare the wheels and rims by
washing, and degreasing with
Diamond Body Prep.
Shake well for 15 seconds and
then apply 8-10 drops to an
applicator.
Apply Diamond Wheels
generously and evenly over all
parts of the wheel rim. Wait up
to 5 min and polish off excess
with a microber towel.
Wait one hour for the coating
to dry.
Car is ready to drive away!
Wipe down with a microber towel to remove any residues left
from the cleaning product used.
PRECAUTIONS
Apply in temperatures between 10-30C,
50-90F.
Apply in a closed, well ventilated, indoor
area with air humidity not exceeding
70%.
APPLICATION TIPS
Allow 2 hours for room temperature
curing. For a faster curing of Diamond
Wheels we suggests using IR Drying lamps.
IR Curing Lamps settings:
Temperature: 50-60°C (120-140°F).
Distance to Wheel Rim: 60-70 cm / 24-28
inches. Time: 20 minutes for each surface
area treated
WHAT YOU’LL NEED
- 2 Microber Towels
- Microber Applicator
- Diamond Body Prep
- Protective Gloves
/