2. STREET AERO
  3. ACM
ACM

STREET AERO ACM User guide

  • Hello! I have reviewed the user manual for the Street Aero Side Splitters. It outlines the process of measuring your vehicle's side skirt to ensure the correct fit. The manual details how to position jack stands and use a tape measure effectively. I'm here to assist with any questions you may have about these instructions.
  • How should I position the jack stands?
    How should I position the tape measure?
    Where on the side skirt should I measure from?
How To Measure Your Side Skirt
SIDE SPLITTER
Position the jack stand near the back
and front of the side skirt
STEP: 1
Use a tape measure to measure your
side skirt
Position the tape measure from the
front to the back end
Keep the tape measure as straight
as possible
NOTE: Make sure you measure from
the very bottom of the side skirt
STEP: 2
Now that you have your side skirt measurements you can place an order for any
Street Aero Side Splitters at www.streetaero.com
Select your Side Splitter size before check out
STEP: 3
[email protected]www.streetaero.com
/