HANECO SKYLUX-G4 Installation guide

Brand
HANECO
Model
SKYLUX-G4
Type
Installation guide

HANECO SKYLUX-G4 is a high-power LED light fixture designed for industrial and commercial applications. It features a rugged construction with an IP65 rating, making it suitable for use in harsh environments. The SKYLUX-G4 is available in a range of wattages and color temperatures, allowing you to choose the right light output and color for your specific needs. It also has a color-switchable option, allowing you to easily adjust the color temperature of the light to match your décor or the task at hand.

HANECO SKYLUX-G4 is a high-power LED light fixture designed for industrial and commercial applications. It features a rugged construction with an IP65 rating, making it suitable for use in harsh environments. The SKYLUX-G4 is available in a range of wattages and color temperatures, allowing you to choose the right light output and color for your specific needs. It also has a color-switchable option, allowing you to easily adjust the color temperature of the light to match your décor or the task at hand.

Thank you for choosing Haneco SKYLUX G4/SL/SP Highbay.
We strongly recommend that you read this manual carefully before installation.
This installation guide is suitable for SKYLUX G4/SL/SP model.
Product Specification
SKYLUX G4/SL/SP
HANECO LED HIGHBAY INSTALLATION GUIDE
For more information
www.haneco.com.au
1300 001 LED (533)
PRODUCT CODE POWER CCT VOLTAGE/
FREQUENCY
IK/IP
RATING
OPERATING
TEMPERATURE
SKYLUX120W-G4 60/70/90/120 3000/4000/5000
220 - 240
50Hz - 60Hz
IK08
IP65 -35 - 50°C
SKYLUX200W-G4 100/150/170/200 3000/4000/5000
SKYLUX120W-SL 60/70/90/120 5000
SKYLUX200W-SL 100/150/170/200 5000
SKYLUX120W-SP 60/70/90/120 5000
SKYLUX200W-SP 100/150/170/200 5000
• Installation must be carried out by a licenced electrician and in accordance
with these instructions and relevant Australian standards and local regulations.
• Ensure input voltage conforms within product specifications.
• Ensure wires are securely connected.
• Before switching on, ensure all wires are correctly connected.
• The warranty is void if product is not installed according to the instructions.
Note: Product technical information and specification may change over time without prior
notice. For latest information, please contact our customer service or visit our website
www.haneco.com.au
WARNING
1. Ensure main power supply is switched off before commencing the installation.
2. Remove the IP65 cover to access the power and color dip switch. Push inward and turn counterclockwise to remove the IP65 cover as shown in
the figure below.
3. Set the desired power and color tone.
Note:
a) Only Skylux G4 model has the color switchable option.
b) Fitting are preset with it highest wattage. To adjust lower fitting wattage, turn the dip switch to ADJ.
4. Ensure to install the IP65 cover.
5. Screw the eye bolt on top of the luminaire.
6. Install optional accessories and desired mounting setting.
7. Install the luminaire onto the desired location.
Installation
Mounting Option
,
Ceiling or wall mount with bracket
Not Included (available as accessories)
,
Ceiling mounting with hook
Mounting bracket holes
For more information
www.haneco.com.au
1300 001 LED (533)
ART24062022
Accessories (Not included)
PRODUCT CODE Part number Description
SKYLUXG4-BRKT 2002276 Skylux G4/SL Mounting Bracket
SKYLUX120G4-PR 2002277 Skylux 120W G4/SL Prismatic Reflector without Cover
SKYLUX200G4-PR 2002278 Skylux 200W G4/SL Prismatic Reflector without Cover
HIGHBAY-MS 2002281 Microwave sensor IP65, 12M
HIGHBAY-REMOTE 2002282 Remote control
SKYLUXG4-EMKIT 2002275 Emergency kit
HBay-DALI-CONV 2002095 DALI Converter
Motion Sensor Installation
STEP 1. Switch Off the power supply. Remove the IP65 cover by rotating it counterclockwise and pull outward.
STEP 2. Insert the mircowave sensor (HIGHBAY- MS : 20022281). Push downward and turn clockwise (360°) to engage
the sensor. Motion sensor setting are set using a remote controller (HIGHBAY-REMOTE : 2002282).
STEP 3. It is correct installation when the microwave sensor are aligned with the marker as shown in image. Turn ON the
unit power and set the microwave sensor suit.
Product Dimension
Dimension Skylux G4 Skylux SL/SP
120W 200W 120W 200W
a 300 340 265 300
b 65 75
c 6.5 8.0
d 133 134
e 183 n/a
a.
e.
b. c.
d.
b. c.
d.
  • Page 1 1
  • Page 2 2

HANECO SKYLUX-G4 Installation guide

Brand
HANECO
Model
SKYLUX-G4
Type
Installation guide

HANECO SKYLUX-G4 is a high-power LED light fixture designed for industrial and commercial applications. It features a rugged construction with an IP65 rating, making it suitable for use in harsh environments. The SKYLUX-G4 is available in a range of wattages and color temperatures, allowing you to choose the right light output and color for your specific needs. It also has a color-switchable option, allowing you to easily adjust the color temperature of the light to match your décor or the task at hand.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents