2. HANECO
  3. VSL20W06-TRI
VSL20W06-TRI

HANECO VSL20W06-TRI Installation guide

  • Hello! I've reviewed the Haneco VistaLINE LED batten installation guide. This document provides crucial instructions for licensed electricians to safely install models VSL20W06-TRI, VSL20W06-TRI-EM, VSL20W40W12-TRI, and VSL20W40W12-TRI-EM. It outlines steps for proper wiring, securing the chassis, and includes safety warnings. Feel free to ask me any questions about the installation process or product specifications!
  • Who should perform the installation?
    What should be checked before switching on the device?
    What does the warranty depend on?
VISTALINE
HANECO LED BATTEN INSTALLATION GUIDE
For more information
www.haneco.com.au
(08) 8297 6373
Installation Instructions
Class I Solid Earthed Fitting PRODUCT CODE: VSL20W06-TRI
VSL20W06-TRI-EM
VSL20W40W12-TRI
VSL20W40W12-TRI-EM
Model Power Beam Angle Frequency IP Rating
VSL20W06-TRI 20W 120° 50/60Hz IP20
VSL20W06-TRI-EM 20W 120° 50/60Hz IP20
VSL20W40W12-TRI 20/40W 120° 50/60Hz IP40
VSL20W40W12-TRI-EM 20/40W 120° 50/60Hz IP40
Specifications
Thank you for choosing Haneco VistaLINE LED batten.
We strongly recommend that you read this manual carefully before installation.
• Installation must be carried out by a licenced electrician and in accordance
with these instructions and relevant Australian standards and local regulations.
• Ensure input voltage conforms within product specifications.
• Ensure wires are securely connected.
• Before switching on, ensure all wires are correctly connected.
• The warranty is void if product is not installed according to the instructions.
Note: Product technical information and specification may change over time without prior
notice. For latest information, please contact our customer service or visit our website
www.haneco.com.au
WARNING
ART08092022
/