Microdigital MDC-8 SERIES User manual

Brand
Microdigital
Model
MDC-8 SERIES
Category
Security cameras
Type
User manual
Ver.120103E
Design and specifications are subject to change without notice.
www.microdigital.co.kr
[email protected]
#1212, Hoseodae Venture Tower,
319, Gasan-Dong, Geumcheon-Gu, Seoul, Korea
Tel :+82-2-2627-5279 / Fax :+82-2-2627-5295
P/N : 3690-0002A
TOTAL SECURITY
G
SOLUTION
Supreme Resolution
Day & Night Color Camera
www.microdigital.co.kr
USER MANUAL
2 MICRODIGITAL
• This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communica-
tions. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
his own expense.
◆ Information
USER INFORMATION
• Any changes or modifications in construction of this device which are not expressly
approved by the party responsible for compliance could void the user’s authority to
operate the equipment.
• This installation should be made by a qualified service person and should abide
to all local codes.
◆ Warning
CAUTION
RISK OF ELECTRIC SHOCK, DO NOT OPEN NO USER-SERVICEABLE PARTS INSIDE.
REFER FOR SERVICING TO QUALIFIED SERVICE PERSONNEL.
THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSISTING OF A
RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.
THIS EXCLAMATION POINT SYMBOL IS INTENDED TO ALERT THE USER
TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE
(SERVICING) INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE
APPLIANCE.
This marking on the product, accessories or literature indicates that the product
and its electronic accessories should not be disposed of with other household
waste at the end of their working life. To prevent possible harm to the environ-
ment or human health from uncontrolled waste disposal, please separate these
items from other types of waste and recycle them responsibly to promote the
sustainable reuse of material resources. Household users should contact either
the retailer where they purchased this product, or their local government office,
for details of where and how they can take these items for environmentally safe
recycling. Business users should contact their supplier and check the terms and
conditions of the purchase contract. This product and its electronic accessories
should not be mixed with other commercial wastes for disposal.
CAUTION
MICRODIGITAL 3
• This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communica-
tions. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
his own expense.
◆ Information
USER INFORMATION
• Any changes or modifications in construction of this device which are not expressly
approved by the party responsible for compliance could void the user’s authority to
operate the equipment.
• This installation should be made by a qualified service person and should abide
to all local codes.
◆ Warning
RISK OF ELECTRIC SHOCK, DO NOT OPEN NO USER-SERVICEABLE PARTS INSIDE.
REFER FOR SERVICING TO QUALIFIED SERVICE PERSONNEL.
THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSISTING OF A
RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.
THIS EXCLAMATION POINT SYMBOL IS INTENDED TO ALERT THE USER
TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE
(SERVICING) INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE
APPLIANCE.
This marking on the product, accessories or literature indicates that the product
and its electronic accessories should not be disposed of with other household
waste at the end of their working life. To prevent possible harm to the environ-
ment or human health from uncontrolled waste disposal, please separate these
items from other types of waste and recycle them responsibly to promote the
sustainable reuse of material resources. Household users should contact either
the retailer where they purchased this product, or their local government office,
for details of where and how they can take these items for environmentally safe
recycling. Business users should contact their supplier and check the terms and
conditions of the purchase contract. This product and its electronic accessories
should not be mixed with other commercial wastes for disposal.
4 MICRODIGITAL
PRECAUTIONS
• Do not install the camera
in extreme temperature
conditions.
Only use the camera under conditions where
temperatures are between -10°C and +50°C.
Be especially careful to provide ventilation
when operating under high temperatures.
• Do not install or use the cam-
era in an environment where
the humidity is high.
It can cause the image quality to be poor.
• Do not install the camera
under unstable lighting
conditions.
Severe lighting change or flicker can cause
the camera to work improperly.
• Do not touch the front lens of
the camera.
This is one of the most important parts of the
camera. Be careful not to leave fingerprints
on the lens cover.
• Do not drop the camera
and protect it from physical
shocks.
It can cause malfunctions to occur.
• Never keep the camera
pointed directly at strong
light.
It can damage the CCD.
• Do not expose the camera to
rain or spill beverage on it.
If it gets wet, wipe it dry immediately. Liquids
can contain minerals that corrode the
electronic components.
• Do not expose the camera to
radioactivity. If exposed to radioactivity the CCD will fail.
Ignoring this information may result
in material loss and/or serious
personal injuries including death.
Indicates “Never Allowed.”
Ignoring this information may
result in material loss and/or a
slight injuries.
Indicates “No Disas-
sembling.”
NOTE
• Exposure to a spotlight or an object emitting strong light may cause smear or blooming.
•
Ensure that the power source complies with normal specifications before supplying it to
the camera.
• Power supply.(Adaptor : DC12V)
- To avoid fire or shock hazard, must use a UL listed power supply.
• Monitor Impedance.
- Set the impedance switch to 75ohm standard position.
- When monitor is set to high impedance mode, the picture becomes blurred. In this
case, just check the position of the monitor impedance switch.
USER INFORMATION
MICRODIGITAL 5
• Do not install the camera
in extreme temperature
conditions.
Only use the camera under conditions where
temperatures are between -10°C and +50°C.
Be especially careful to provide ventilation
when operating under high temperatures.
• Do not install or use the cam-
era in an environment where
the humidity is high.
It can cause the image quality to be poor.
• Do not install the camera
under unstable lighting
conditions.
Severe lighting change or flicker can cause
the camera to work improperly.
• Do not touch the front lens of
the camera.
This is one of the most important parts of the
camera. Be careful not to leave fingerprints
on the lens cover.
• Do not drop the camera
and protect it from physical
shocks.
It can cause malfunctions to occur.
• Never keep the camera
pointed directly at strong
light.
It can damage the CCD.
• Do not expose the camera to
rain or spill beverage on it.
If it gets wet, wipe it dry immediately. Liquids
can contain minerals that corrode the
electronic components.
• Do not expose the camera to
radioactivity. If exposed to radioactivity the CCD will fail.
Ignoring this information may result
in material loss and/or serious
personal injuries including death.
Indicates “Never Allowed.”
Ignoring this information may
result in material loss and/or a
slight injuries.
Indicates “No Disas-
sembling.”
USER INFORMATION
NOTE
• Exposure to a spotlight or an object emitting strong light may cause smear or blooming.
•
Ensure that the power source complies with normal specifications before supplying it to
the camera.
• Power supply.(Adaptor : DC12V)
- To avoid fire or shock hazard, must use a UL listed power supply.
• Monitor Impedance.
- Set the impedance switch to 75ohm standard position.
- When monitor is set to high impedance mode, the picture becomes blurred. In this
case, just check the position of the monitor impedance switch.
6 MICRODIGITAL
• DESCRIPTION 8 - 10
• SPECIFICATION 11 - 12
• FEATURES 13 - 14
• COMPONENTS 15 - 29
▪ BOX CAMERA
▪ BULLET CAMERA
▪ DOME CAMERA
▪ VANDAL CAMERA
15 - 17
18 - 24
25 - 27
28 - 29
• INSTALLATION 30 - 35
▪ BOX CAMERA
▪ BULLET CAMERA
▪ DOME CAMERA
▪ VANDAL CAMERA
30 - 31
32
33
34 - 35
• OSD OPERATION 36 - 42
▪ BOX CAMERA
▪ BULLET CAMERA
▪ DOME CAMERA
▪ VANDAL CAMERA
36 - 37
37 - 39
40
41
• INSTRUCTIONS 43
• OSD STRUCTURE 44
CONTENTS
MICRODIGITAL 7
CONTENTS
• LENS 45
• EXPOSURE 46 - 48
▪ SHUTTER
▪ AGC
▪ SENS-UP
▪ BLC
▪ D-WDR
▪ RETURN
46
46
47
47
48
48
• WHITE BALANCE 49 - 50
• DAY & NIGHT 51 - 52
• 3D DNR 53
• SPECIAL 54 - 59
▪ CAM TITLE
▪ D-EFFECT
▪ RS-485
▪ MOTION
▪ PRIVACY
▪ SYNC
▪ LANGUAGE
▪ DEFECT
54
55
56
56
58
59
59
59
• ADJUST 60
• RESET 61
• OSD STRUCTURE-MAIN MENU
8 MICRODIGITAL
Before operating the camera, confirm the camera model and proper input
power voltage. In order to help you understand this manual thoroughly,
we’ll introduce our model description.
◆ MODEL DESCRIPTION
MDC - H8220 - TDN - 30 HU
H 8 2 2 0
Built in Heater / UTC
Number of IR-LED
Day / Night
Filter mechanism
Power source
Number of Pixels
B/W(1) / Color(2)
Case type
Model type
• EX)
CASE TYPE MODEL
TYPE
COLOR PIXEL POWER D/N
LENS
IR/HEATER
/ CASE
1: MINI BULLET
2: MODULE
3: MINI SQUARE
4: BOX
5: ZOOM
6: IR BULLET
7: IN DOOR
DOME
8: OUT DOOR
DOME
(VANDAL)
9: MINI VANDAL
i : IP
H : HD
1: B/W
2: COLOR
1: 270K
2: 410K
6: 1.3M
9: 2.1M
0: DC 12V
1: DUAL
VOLTAGE
(DC 12V/
AC24V)
2: AC230V
C
CTD
CDN
F
FDN
TDN
V
VX
VTD
VDN
WDN
F(E)
V(E)
IR : No. of
IR-LED
H: With Heater
U : UTC
CONTROL
MS : SUFACE
MOUNT TYPE
MF : FLUSH
MOUNT TYPE
IR & HEATER (MDC-6xxx, 7xxx, 8xxx MODEL)
-H -U
Built-in Heater UTC Remote Control
-30 -30H
Built-in IR LED
and CDS Sensor
Built-in IR LED
and CDS Sensor With Heater
DESCRIPTION
MICRODIGITAL 9
DESCRIPTION
Before operating the camera, confirm the camera model and proper input
power voltage. In order to help you understand this manual thoroughly,
we’ll introduce our model description.
Built in Heater / UTC
Number of IR-LED
Day / Night
Filter mechanism
Power source
Number of Pixels
B/W(1) / Color(2)
Case type
CASE TYPE MODEL
TYPE
COLOR PIXEL POWER D/N
LENS
IR/HEATER
/ CASE
1: MINI BULLET
2: MODULE
3: MINI SQUARE
4: BOX
5: ZOOM
6: IR BULLET
7: IN DOOR
DOME
8: OUT DOOR
DOME
(VANDAL)
9: MINI VANDAL
i : IP
H : HD
1: B/W
2: COLOR
1: 270K
2: 410K
6: 1.3M
9: 2.1M
0: DC 12V
1: DUAL
VOLTAGE
(DC 12V/
AC24V)
2: AC230V
C
CTD
CDN
F
FDN
TDN
V
VX
VTD
VDN
WDN
F(E)
V(E)
IR : No. of
IR-LED
H: With Heater
U : UTC
CONTROL
MS : SUFACE
MOUNT TYPE
MF : FLUSH
MOUNT TYPE
IR & HEATER (MDC-6xxx, 7xxx, 8xxx MODEL)
-H -U
Built-in Heater UTC Remote Control
-30 -30H
Built-in IR LED
and CDS Sensor
Built-in IR LED
and CDS Sensor With Heater
Heater
Heater
IR
LED
IR
LED
10 MICRODIGITAL
PRECAUTIONS
DAY / NIGHT FILTER & MECHANISM
CDN
DIGITAL DAY / NIGHT
FDN
DIGITAL DAY / NIGHT
VDN
DIGITAL DAY / NIGHT
TDN
TRUE DAY / NIGHT (ICR-IR Cut Filter Removable)
POWER SOURCE
MDC-xxx0
- DC 12V
MDC-xxx1
- AC 24V / DC 12V, Dual-Power
MDC-xxx2
- AC 230V
DAY / NIGHT
DAY / NIGHT
DAY / NIGHT
LENS
Fixed
Fixed
DC Auto
Iris Lens
AC 230V
AC 24V
DC 12V
DC 12V
DAY / NIGHT
DC Auto
Iris Lens
FILTER CHANGE
LENS
VARIFOCALVARIFOCAL
LENS
VARIFOCALVARIFOCAL
Signal System NTSC PAL
Scanning Frequency 15,734KHz(H), 59.94Hz(V) 15,625KHz(H), 50.00Hz(V)
Image Sensor 1/3” Interline Transfer Type High Sensitivity Color CCD
Sync. System INT / LL
Total Pixels Number 811(H) X 508(V), 410K pixels 795(H) X 596(V), 470K pixels
Effective Pixels Number 768(H) x 494(V), 380K pixels 752(H) x 582(V), 440K pixels
Horizontal Resolution Color 600 TV Lines / BW 700 TV Lines
Video Output Level 1.0Vp-p, 75ohm (Video 0. 714Vp-p Sync. 0.286Vp-p)
S/N Ratio 52 dB (AGC OFF, Weight On)
Dynamic Range 52dB(*128)
DAY / NIGHT COLOR / AUTO / BW / EXTERNAL
Sens Up AUTO / OFF
3 DNR ON / OFF (1~100 Level Selectable)
D-WDR INDOOR / OUTDOOR / OFF
AGC OFF / LOW / MIDDLE / HIGH
BLC BLC / HSBLC
AWB ATW / AWB / INDOOR / OUTDOOR / MANUAL / AWC
Mirror OFF / MIRROR / V-FLIP / ROTATE
Privacy Function ON / OFF (8 Zone)
Motion Detection ON / OFF (4 Zone Selectable)
Freeze ON / OFF
Sharpness 0~31 (Level Selectable)
Digital Zoom On(*32) / OFF
MONITOR LCD / CRT / USER
DEFECT SENSE-UP / DIFFERENCE / START
Electronic Shutter 1/60sec ~ 1/100,000sec 1/50sec ~ 1/100,000sec
OSD Built-in
Operating Temperature (-)30°C ~ (+)50°C, (-)40°C ~ (+)50°C (Built-In Heater Model)
Operating Humidity 95% RH max
Power Voltage DC12V ± 10%
DESCRIPTION
MICRODIGITAL 11
DAY / NIGHT FILTER & MECHANISM
CDN
DIGITAL DAY / NIGHT
FDN
DIGITAL DAY / NIGHT
VDN
DIGITAL DAY / NIGHT
TDN
TRUE DAY / NIGHT (ICR-IR Cut Filter Removable)
POWER SOURCE
MDC-xxx0
- DC 12V
MDC-xxx1
- AC 24V / DC 12V, Dual-Power
MDC-xxx2
- AC 230V
Signal System NTSC PAL
Scanning Frequency 15,734KHz(H), 59.94Hz(V) 15,625KHz(H), 50.00Hz(V)
Image Sensor 1/3” Interline Transfer Type High Sensitivity Color CCD
Sync. System INT / LL
Total Pixels Number 811(H) X 508(V), 410K pixels 795(H) X 596(V), 470K pixels
Effective Pixels Number 768(H) x 494(V), 380K pixels 752(H) x 582(V), 440K pixels
Horizontal Resolution Color 600 TV Lines / BW 700 TV Lines
Video Output Level 1.0Vp-p, 75ohm (Video 0. 714Vp-p Sync. 0.286Vp-p)
S/N Ratio 52 dB (AGC OFF, Weight On)
Dynamic Range 52dB(*128)
DAY / NIGHT COLOR / AUTO / BW / EXTERNAL
Sens Up AUTO / OFF
3 DNR ON / OFF (1~100 Level Selectable)
D-WDR INDOOR / OUTDOOR / OFF
AGC OFF / LOW / MIDDLE / HIGH
BLC BLC / HSBLC
AWB ATW / AWB / INDOOR / OUTDOOR / MANUAL / AWC
Mirror OFF / MIRROR / V-FLIP / ROTATE
Privacy Function ON / OFF (8 Zone)
Motion Detection ON / OFF (4 Zone Selectable)
Freeze ON / OFF
Sharpness 0~31 (Level Selectable)
Digital Zoom On(*32) / OFF
MONITOR LCD / CRT / USER
DEFECT SENSE-UP / DIFFERENCE / START
Electronic Shutter 1/60sec ~ 1/100,000sec 1/50sec ~ 1/100,000sec
OSD Built-in
Operating Temperature (-)30°C ~ (+)50°C, (-)40°C ~ (+)50°C (Built-In Heater Model)
Operating Humidity 95% RH max
Power Voltage DC12V ± 10%
SPECIFICATION
12 MICRODIGITAL
MODEL TYPE LENS
MDC-4xxx CDN C / CS MOUNT
TDN C / CS MOUNT (ICR-IR Cut Filter Removable Mechanism)
MDC-6xxx
TDN
35H, 45, 40H, 32 Filter Changeable Vari-Focal 6.0~50.0mm DC Auto Iris Lens
20, 20H, 36H, 48
24H, 42 Filter Changeable Vari-Focal 3.5~16.0mm DC Auto Iris Lens
32U, 40HU Filter Changeable Vari-Focal 6.0~50.0mm 2 Motor Drive Lens
24HU, 42U Filter Changeable Vari-Focal 2.8~12.0mm 2 Motor Drive Lens
MDC-7xxx
FDN Built-In Fixed 3.6mm Board Lens
VDN Vari-Focal 3.5~16.0mm DC Auto Iris Lens
TDN Filter Changeable Vari-Focal 3.5~16.0mm DC Auto Iris Lens
MDC-8xxx VDN Vari-Focal 3.5~16.0mm DC Auto Iris Lens
TDN Filter Changeable Vari-Focal 3.5~16.0mm DC Auto Iris Lens
MODEL TYPE Min. ILLUMINATION
MDC-4xxx
CDN 0.15 (Color) / 0.03 (BW) / 0.00001 / Lux(Sens-up x 256)
TDN 0.15 (Color) / 0.01 (BW) / 0.00001 / Lux(Sens-up x 256)
(ICR-IR Cut Filter Removable Mechanism)
MDC-6xxx
TDN
0.25 (Color) / 0.01 (BW) / 0.00001 Lux / Lux at F1.2 (Sens-up x 256)
0 Lux at IR LEDs On (ICR-IR Cut Filter Removable Mechanism)
MDC-7xxx
FDN 0.25 (Color) / 0.06 (BW) / 0.00001 / Lux at F1.2 (Sens-up x 256)
VDN 0.15 (Color) / 0.03 (BW) / 0.00001 / Lux at F1.2 (Sens-up x 256)
TDN 0.25 (Color) / 0.01 (BW) / 0.00001 / Lux at F1.2 (Sens-up x
256) (ICR-IR Cut Filter Removable Mechanism)
MDC-8xxx
VDN 0.15 (Color) / 0.03 (BW) / 0.00001 / Lux at F1.2(Sens-up x 256)
TDN 0.25 (Color) / 0.01 (BW) / 0.00001 / Lux at F1.2(Sens-up x 256)
(ICR-IR Cut Filter Removable Mechanism)
LENS
Min. ILLUMINATION
1/3” Interline Transfer Type High Sensitivity Color CCD
600TV Lines
The combination of a 1/3” Interline Transfer Type High Sensitivity Color CCD
and DNR DSP provides an excellent resolution of 600 TV lines.
Min. Illumination
With an incredibly Minimum Illuminatio of Amazing 0.0001Lux can Capture
Good Images Even in Extremely Low Light Conditions and Related Noises
are Significantly Reduced by the Ultra Advanced DNR(Digital Noise Reduc-
tion) Technology.
D-WDR (Digital Wide Dynamic Range)
D-WDR is a powerful and ultra advanced technology that captures clear and
superior high Resolution pictures even where images appear dark because
there is a strong back light present.
High Light Compensation (HLC) Function
High Light Compensation Function is Especially Effective to Read the Number
Plate of the Vehicles in the Street or Parking Lot at Night Time. Especially
Users Can Adjust and Select the Special Required Area to Observe the Target
Object Under the Strong Spots of Light Exist.
3D Filtering Method of Newly Advanced DNR Functionn
Newly developed 3D filtering enhances Digital Noise reduction at low light
levels. 3D Filtering of the Video Signal Optimized the Signal to Noise ratio,
giving vastly improved low light visibility and a powerful Sens-Up function
(up to 258 times magnification).
DAY / NIGHT
The camera identifies whether it is day or night and automatically switches
to the appropriate mode, depending on its environment. By day, the camera
switches to color mode in order to maintain optimal color. At night, it switches
to B/W mode so as to obtain better picture definition.
DPC (Dead Pixel Compensation [Max 64points])
When the camera becomes hot after operating a couple of days, white
spots are shown on the screen especially at low light condition and they are
recorded together with normal image. By using thise function, white spots
are removed and you can get clean images.
600 TV LINE
DAY / NIGHT
3DNR
1/3” IT
CCD
HLC
▶Specifications are subject to change without prior notice due to improvement
SPECIFICATION
MICRODIGITAL 13
MODEL TYPE LENS
MDC-4xxx CDN C / CS MOUNT
TDN C / CS MOUNT (ICR-IR Cut Filter Removable Mechanism)
MDC-6xxx
TDN
35H, 45, 40H, 32 Filter Changeable Vari-Focal 6.0~50.0mm DC Auto Iris Lens
20, 20H, 36H, 48
24H, 42 Filter Changeable Vari-Focal 3.5~16.0mm DC Auto Iris Lens
32U, 40HU Filter Changeable Vari-Focal 6.0~50.0mm 2 Motor Drive Lens
24HU, 42U Filter Changeable Vari-Focal 2.8~12.0mm 2 Motor Drive Lens
MDC-7xxx
FDN Built-In Fixed 3.6mm Board Lens
VDN Vari-Focal 3.5~16.0mm DC Auto Iris Lens
TDN Filter Changeable Vari-Focal 3.5~16.0mm DC Auto Iris Lens
MDC-8xxx VDN Vari-Focal 3.5~16.0mm DC Auto Iris Lens
TDN Filter Changeable Vari-Focal 3.5~16.0mm DC Auto Iris Lens
MODEL TYPE Min. ILLUMINATION
MDC-4xxx
CDN 0.15 (Color) / 0.03 (BW) / 0.00001 / Lux(Sens-up x 256)
TDN 0.15 (Color) / 0.01 (BW) / 0.00001 / Lux(Sens-up x 256)
(ICR-IR Cut Filter Removable Mechanism)
MDC-6xxx
TDN
0.25 (Color) / 0.01 (BW) / 0.00001 Lux / Lux at F1.2 (Sens-up x 256)
0 Lux at IR LEDs On (ICR-IR Cut Filter Removable Mechanism)
MDC-7xxx
FDN 0.25 (Color) / 0.06 (BW) / 0.00001 / Lux at F1.2 (Sens-up x 256)
VDN 0.15 (Color) / 0.03 (BW) / 0.00001 / Lux at F1.2 (Sens-up x 256)
TDN 0.25 (Color) / 0.01 (BW) / 0.00001 / Lux at F1.2 (Sens-up x
256) (ICR-IR Cut Filter Removable Mechanism)
MDC-8xxx
VDN 0.15 (Color) / 0.03 (BW) / 0.00001 / Lux at F1.2(Sens-up x 256)
TDN 0.25 (Color) / 0.01 (BW) / 0.00001 / Lux at F1.2(Sens-up x 256)
(ICR-IR Cut Filter Removable Mechanism)
FEATURES
1/3” Interline Transfer Type High Sensitivity Color CCD
600TV Lines
The combination of a 1/3” Interline Transfer Type High Sensitivity Color CCD
and DNR DSP provides an excellent resolution of 600 TV lines.
Min. Illumination
With an incredibly Minimum Illuminatio of Amazing 0.0001Lux can Capture
Good Images Even in Extremely Low Light Conditions and Related Noises
are Significantly Reduced by the Ultra Advanced DNR(Digital Noise Reduc-
tion) Technology.
D-WDR (Digital Wide Dynamic Range)
D-WDR is a powerful and ultra advanced technology that captures clear and
superior high Resolution pictures even where images appear dark because
there is a strong back light present.
High Light Compensation (HLC) Function
High Light Compensation Function is Especially Effective to Read the Number
Plate of the Vehicles in the Street or Parking Lot at Night Time. Especially
Users Can Adjust and Select the Special Required Area to Observe the Target
Object Under the Strong Spots of Light Exist.
3D Filtering Method of Newly Advanced DNR Functionn
Newly developed 3D filtering enhances Digital Noise reduction at low light
levels. 3D Filtering of the Video Signal Optimized the Signal to Noise ratio,
giving vastly improved low light visibility and a powerful Sens-Up function
(up to 258 times magnification).
DAY / NIGHT
The camera identifies whether it is day or night and automatically switches
to the appropriate mode, depending on its environment. By day, the camera
switches to color mode in order to maintain optimal color. At night, it switches
to B/W mode so as to obtain better picture definition.
DPC (Dead Pixel Compensation [Max 64points])
When the camera becomes hot after operating a couple of days, white
spots are shown on the screen especially at low light condition and they are
recorded together with normal image. By using thise function, white spots
are removed and you can get clean images.
600 TV LINE
DAY / NIGHT
3DNR
1/3” IT
CCD
HLC
14 MICRODIGITAL
DIGITAL ZOOM
Digital zoom available, OFF(x1) / ON(x2~x32) can be selected
IR SMART
It enables users to distinguish the indistinguishable images saturated by
IR LED.
Additional Functions
1. OSD - ON Screen Display menu with multi-Language support.
2. FreeArea Selectable function of BLC and MOTION DETECTION
3. Privacy Color Masking for 8 Area selection
4. Max 70% of Disk Saving Effect with Super DNR
5. Negative image Function
Weather proof IP66
MDC-6xxx , MDC-8xxx MODEL
External Focus & Focal Length Adjustment
77Ø, 88Ø Series (MDC-6220VTD-35H, 36H, 45, 48)
Dual(Surface / Flush) Mount Type Vandal Proof Dome Camera
MDC-8xxx MODEL
1. The unit is installed by two types of installation with flush or surface
mount. When the camera is installed with flush mount, the unit can be
installed into an existing two-gang junction box.
2. Surface or Flush Mounting using the supplied surface mount bracket.
C / CS Mount Lens Adjustable
MDC-4xxx MODEL
UTC Remote Controller
- Long distance controller.
- Menu can be adjusted without opening the camera case.
- It is of conveniently portable size.
IP66
SMART
IR
Vandal Proof
OSD
1. Camera
2. Auto IRIS Lens Connection Plug
3. L-WRENCH
4. C - Mount Adaptor
5. Manual
Width Height depth
64 58 102
FEATURES
MICRODIGITAL 15
DIGITAL ZOOM
Digital zoom available, OFF(x1) / ON(x2~x32) can be selected
IR SMART
It enables users to distinguish the indistinguishable images saturated by
IR LED.
Additional Functions
1. OSD - ON Screen Display menu with multi-Language support.
2. FreeArea Selectable function of BLC and MOTION DETECTION
3. Privacy Color Masking for 8 Area selection
4. Max 70% of Disk Saving Effect with Super DNR
5. Negative image Function
Weather proof IP66
MDC-6xxx , MDC-8xxx MODEL
External Focus & Focal Length Adjustment
77Ø, 88Ø Series (MDC-6220VTD-35H, 36H, 45, 48)
Dual(Surface / Flush) Mount Type Vandal Proof Dome Camera
MDC-8xxx MODEL
1. The unit is installed by two types of installation with flush or surface
mount. When the camera is installed with flush mount, the unit can be
installed into an existing two-gang junction box.
2. Surface or Flush Mounting using the supplied surface mount bracket.
C / CS Mount Lens Adjustable
MDC-4xxx MODEL
UTC Remote Controller
- Long distance controller.
- Menu can be adjusted without opening the camera case.
- It is of conveniently portable size.
1. Camera
2. Auto IRIS Lens Connection Plug
3. L-WRENCH
4. C - Mount Adaptor
5. Manual
COMPONENTS
'&9,1
32:(5
,5,6-$&.
9,'(2287
'&
9,'(2
6(7
)*
w
D
H
Width Height depth
64 58 102
16 MICRODIGITAL
Over view
3Back focus clamp screw & Hole
4Mount bracket
1Lens protection cap
2CS-MOUNT Lens adaptor
1 Lens protection cap
Cover the lens when not in use.
2 CS-mount lens adaptor
Attach the CS-mount lens here, and if you want to use C-mount lens, also please
attach C-ring to the CS-mount and then also
3 Back focus clamp screw
Loosen the clamp screw with a L-Wrench before adjusting the Back Focal length.
4 Mount bracket
Use the screw holes provided when fixing the camera onto a mounting bracket.
The mounting bracket can be attached to either the bottom or the top of the camera.
Rear view
1 Auto iris lens connector
Connection terminal for an auto iris lens.
2 Auto iris lens selection switch
Used to change between DC or Video depending upon the type of auto iris in use.
3 Video output terminal
Sends video signals and connects to the video input terminal of the monitor.
4 Power lamp
Lights up when the correct power is supplied to the camera.
5 OSD button
6 Power input terminal : Low voltage power connection.
7 AC Power Cord : Accept AC90~240V-50Hz/60Hz
MDC-4xx0/ 4xx1
DC 12V IN
AC 24V IN
POWER
IRIS JACK VIDEO OUT
DC
VIDEO
SET
F.G
AC24V / DC12V
POWER
IRIS JACK VIDEO OUT
DC
VIDEO
SET
F.G
AC230V
1
4
6
5
2 3 1
4
7
5
2 3
MDC-4220CDN / TDN
COMPONENTS
MICRODIGITAL 17
COMPONENTS
1 Lens protection cap
Cover the lens when not in use.
2 CS-mount lens adaptor
Attach the CS-mount lens here, and if you want to use C-mount lens, also please
attach C-ring to the CS-mount and then also
3 Back focus clamp screw
Loosen the clamp screw with a L-Wrench before adjusting the Back Focal length.
4 Mount bracket
Use the screw holes provided when fixing the camera onto a mounting bracket.
The mounting bracket can be attached to either the bottom or the top of the camera.
Rear view
1 Auto iris lens connector
Connection terminal for an auto iris lens.
2 Auto iris lens selection switch
Used to change between DC or Video depending upon the type of auto iris in use.
3 Video output terminal
Sends video signals and connects to the video input terminal of the monitor.
4 Power lamp
Lights up when the correct power is supplied to the camera.
5 OSD button
6 Power input terminal : Low voltage power connection.
7 AC Power Cord : Accept AC90~240V-50Hz/60Hz
MDC-4xx0/ 4xx1 MDC-4xx2
Specifications and Designs are subject to change without prior notice due to improvement
DC 12V IN
AC 24V IN
POWER
IRIS JACK VIDEO OUT
DC
VIDEO
SET
F.G
AC24V / DC12V
POWER
IRIS JACK VIDEO OUT
DC
VIDEO
SET
F.G
AC230V
1
4
6
5
2 3 1
4
7
5
2 3
18 MICRODIGITAL
1. Varifocal IR Bullet Camera
2. Cable for Extra Video
3. L-WRENCH
4. Screw for Installation
5. Manual
1 Lens
2 IR-LED / Heater (Option)
3 Zoom / Focus Lever
4 OSD Joystick (Option)
5 Cable Management Bracket
6 VBS-Extra for connecting to LCD (Option)
VBS-EXTRA
COMPONENTS
MICRODIGITAL 19
1 Lens
2 IR-LED / Heater (Option)
3 Zoom / Focus Lever
4 OSD Joystick (Option)
5 Cable Management Bracket
6 VBS-Extra for connecting to LCD (Option)
VBS-EXTRA
24
3
15
6
COMPONENTS
MDC-6220TDN-20 & 20H (65Ø)
20 MICRODIGITAL
L
D
W
MDC-6220 20 20H
Dimension
Diameter 65ø (63.09ø)
Width 74.00
Length 146.80
IR LED & Heater 20pcs IR LED 20pcs IR-LED,
3pcs Heater
Power Consumption
Normal 140mA
IR LED ON 320mA
Heater ON X 460mA
Dimension
1 Lens
2 IR-LED / Heater (Option)
3 Zoom / Focus Lever
4 OSD Joystick (Option)
5 Cable Management Bracket
6 VBS-Extra for connecting to LCD (Option)
▶Specifications and Designs are subject to change without prior notice due to improvement
COMPONENTS
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64

Microdigital MDC-8 SERIES User manual

Brand
Microdigital
Model
MDC-8 SERIES
Category
Security cameras
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents