Intermetro HVDC2448 Datasheet

Type
Datasheet
Valet Delivery Cart
INSTRUCTIONS
®
InterMetro Industries Corporation
North Washington Street, Wilkes-Barre, PA 18705
For Product Information Call: 1-800-433-2232
Visit Our Web Site: www.metro.com
ASSEMBLY
INSTRUCTIONS
For Valet Delivery Cart
ASSEMBLY
Model Number HVDC2448
List of Components
Item Qty. Description
63UP 4 Post
5M 2 Caster
5MB 2 Caster with Brake
PIC-CTN1 1 2-Posts with Foot Plates
2448NC 2 24x48 Shelf
2424NC 3 24x24 Shelf
T24C 1 Coat Hanger Tube
24NC 2 Coat Hanger Brackets
R61NC 12 Rods with Tabs
DD24C 4 Dividers
9985 5 Bag of Split Sleeves
1
Valet Delivery Cart
®
InterMetro Industries Corporation
North Washington Street, Wilkes-Barre, PA 18705
For Product Information Call: 1-800-433-2232
Visit Our Web Site: www.metro.com
L01-342
6/99
Information and specifications are subject to change
without notice. Please confirm at time of order.
Seat the remaining shelves
(See Fig. 6). NOTE: Count fifteen
grooves to equally space the
shelves.
Count up fourteen grooves from the
bottom shelf and place a pair of split
sleeves on only two posts on the
same end of the cart.
Take the cut down posts and count
up twelve grooves from the bottom
and place a pair of split sleeves on
each post.
Take one of the small shelves and
lower it over the tops of the four
posts, with sleeves in place. Fit the
shelf onto the previously installed
split sleeves and seat the shelf
(See Fig. 4).
Being certain that the cut down posts
are standing vertically, slip the
special foot plates under the leveling
leg. Unscrew the leveling bolts until
they contact the foot plates.
(See Fig. 5).
2
3
4
5
7
6
With the top shelf in place, attach the
hanger tube.
  • Page 1 1
  • Page 2 2

Intermetro HVDC2448 Datasheet

Type
Datasheet

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI