SafeRacks WS-301460-Z5 Operating instructions

Brand: SafeRacks

Model: WS-301460-Z5

Type: Operating instructions

SafeRacks WS-301460-Z5 is a sturdy and reliable shelving unit designed to meet your diverse storage needs. With its five wire shelves, it offers ample space to organize and store items in your home, office, or garage. The adjustable clip sleeves allow you to customize the shelf heights to accommodate items of different sizes. The unit is easy to assemble with its included base levelers or wheels for added stability and mobility. Constructed from durable materials, the SafeRacks WS-301460-Z5 ensures longevity and can withstand heavy loads.

SafeRacks WS-301460-Z5 is a sturdy and reliable shelving unit designed to meet your diverse storage needs. With its five wire shelves, it offers ample space to organize and store items in your home, office, or garage. The adjustable clip sleeves allow you to customize the shelf heights to accommodate items of different sizes. The unit is easy to assemble with its included base levelers or wheels for added stability and mobility. Constructed from durable materials, the SafeRacks WS-301460-Z5 ensures longevity and can withstand heavy loads.

-

Please inspect box contents to ensure you have received all components.

- For best results, assemble on flat ground.

- Keep small parts such as clip pieces and screws out of the reach of children.

Parts Table:

Wire Shelf

Upper-Post

Lower-Post

Clip Sleeve

Installation Steps:

2.

On each Post, snap the two halves of the Clip Sleeves (D) at the

desired level with the arrow pointing up. Make sure that the

heights are

identical for each post.

3.

Hold shelf sideways - slide Post with attached Clip Sleeves

through the bottom of the shelf until the shelf collar fastens

over the Clip Sleeves. Repeat for other three corners of the

shelf.

4. Position the unit upright after all four posts are in place,

use a rubber mallet to tap each corner of the shelf into position,

or firmly push shelves into place.

6. Repeat the above steps to assemble other

wire shelves (A) one by one.

1. Screw in each Base Leveler (E) into the bottom of each Lower

Post (C), turn each leveler clock-wise until in desired location.

If your unit comes with wheels, insert them in place of the

Base Levelers.

ASSEMBLY INSTRUCTIONS

Wire Shelving Unit - 5 Shelf

Please follow the directional arrow

when placing the clip sleeves.

Upper

Post

Lower

Post

5. Screw the Upper Post (B) into the Lower Post (C) tightly by inserting

threaded end of the Upper Post into the open end of the Lower Post.

Base Leveler QTY: 4

Note: The black circular plastic tops

in-between the shelves are used

only for packaging purposes. They

are NOT NEEDED. Please discard.

QTY: 4QTY: 5

QTY: 4

QTY: 40

NOTE: To ensure stability, the bottom shelf must be positioned

below the third groove line from the bottom of the pole and the

top shelf above the third groove line from the top of the pole.

© 2015-2016 Copyright Eagle Industrial Group Inc. U.S. Patents D553,401 / 7,357,262 / D697,785 / 7,152,535. Limited Lifetime Warranty - U.S. Only.

www.SafeRacks.com // 877-655-3443

SafeRacks goal is to provide the highest quality storage solutions.

If you have questions please visit our website or give us a call:

SafeRacks

®

1

SafeRacks WS-301460-Z5 Operating instructions

Brand: SafeRacks

Model: WS-301460-Z5

Type: Operating instructions

SafeRacks WS-301460-Z5 is a sturdy and reliable shelving unit designed to meet your diverse storage needs. With its five wire shelves, it offers ample space to organize and store items in your home, office, or garage. The adjustable clip sleeves allow you to customize the shelf heights to accommodate items of different sizes. The unit is easy to assemble with its included base levelers or wheels for added stability and mobility. Constructed from durable materials, the SafeRacks WS-301460-Z5 ensures longevity and can withstand heavy loads.

Download PDF

Related papers

Other documents