2. AMG
  3. AMG2123L

AMG AMG2123L Instruction Sheet

  • I have reviewed the Instruction Sheet for the AMG2123L Fibre Optic Transmitter. This document provides detailed specifications for the device, including its video and optical connections, dimensions, and mounting. It also describes the power indicator and essential technical details. I am ready to answer your questions about the device.
  • What type of connectors are used for video connections?
    What type of connectors are used for optical connections?
    What is the nominal wavelength of the device?
AMG Systems Ltd. reserves the right to make changes to this document without notice.
The information herein is believed to be accurate. No responsibility however is assumed
by AMG for its use.
Page 1 of 1 D03635-00
AMG2123L
Instruction Sheet
AMG2123L 1300nm Rackmount Three Channel Video Only Fibre Optic Transmitter
Video Connection
Connectors ...........................75 ohm BNC Socket.
Input Impedance...................75 ohm terminated.
Input Level ...........................1 volt p-p nominal.
Frequency Response.............10Hz to 10MHz min.
Optical Connection
Connectors............................ST Style
Launch Power
50/125............................-20dBm min. -17dBm typ.
62.5/125.........................-17dBm min. -14dBm typ.
Wavelength...........................1300nm nominal.
Dimensions
Height ...................................3U
Width....................................7HP
Depth ....................................205mm
Mounting Details
The AMG2123L plugs into and is powered from the AMG2000 Subrack
Indicators
Power....................................Green – lit when unit powered
POWER
2123
/