KV2 Audio ESD6 User manual

KV2 Audio
Brand
KV2 Audio
Model
ESD6
Category
Loudspeakers
Type
User manual

KV2 Audio ESD6 is a professional full-range loudspeaker system designed for a variety of applications, including live music, DJ performances, and sound reinforcement. It features a 6" woofer for clear and punchy bass, a 6" midrange driver for natural vocals, and a 1" compression driver for crisp highs. The ESD6 delivers a wide frequency response of 68Hz to 20kHz and can handle up to 175 watts of power, making it ideal for use in both small and large venues.

KV2 Audio ESD6 is a professional full-range loudspeaker system designed for a variety of applications, including live music, DJ performances, and sound reinforcement. It features a 6" woofer for clear and punchy bass, a 6" midrange driver for natural vocals, and a 1" compression driver for crisp highs. The ESD6 delivers a wide frequency response of 68Hz to 20kHz and can handle up to 175 watts of power, making it ideal for use in both small and large venues.

ESD Series
User Guide
The future of sound.
Made perfectly clear.
At KV2 Audio our vision is to constantly develop
technologies that eliminate distortion and
loss of information providing a true dynamic
representation of the source.
Our aim is to create audio products that absorb
you, place you within the performance and deliver
a listening experience beyond expectation.
t
ESD6
t
ESD36
t
ESD10
t
ESD12
t
ESD15
ESD Series
Contents
Contents
3
ESD6
Overview 4
Installation 5
Frequency characteristics 6
Specications 7
ESD36
Overview 8
Installation 9
Frequency characteristics 10
Specications 11
ESD10
Overview 12
Installation 13
Frequency characteristics 14
Specications 15
ESD12
Overview 16
Installation 17
Frequency characteristics 18
Specications 19
ESD15
Overview 20
Installation 21
Frequency characteristics 22
Specications 23
Accessories, Warranty
Accessories 24
Warranty 26
ESD6
+ (1+, 2+) + (1+, 2+)
SERIAL NUMBER
PARALLEL
16 Ohms / 175Watts
FULL RANGE
+ (1+, 2+) + (1+, 2+)
SERIAL NUMBER
PARALLEL
16 Ohms / 175Watts
FULL RANGE
+ (1+, 2+) + (1+, 2+)
SERIAL NUMBER
PARALLEL
16 Ohms / 175Watts
FULL RANGE
+ (1+, 2+) + (1+, 2+)
SERIAL NUMBER
PARALLEL
16 Ohms / 175Watts
FULL RANGE
+ (1+, 2+) + (1+, 2+)
SERIAL NUMBER
PARALLEL
16 Ohms / 175Watts
FULL RANGE
+ (1+, 2+) + (1+, 2+)
SERIAL NUMBER
PARALLEL
16 Ohms / 175Watts
FULL RANGE
+ (1+, 2+) + (1+, 2+)
SERIAL NUMBER
PARALLEL
16 Ohms / 175Watts
FULL RANGE
+ (1+, 2+) + (1+, 2+)
SERIAL NUMBER
PARALLEL
16 Ohms / 175Watts
FULL RANGE
Application:
t)JHIRVBMJUZöYFEJOTUBMMBUJPOTXJUIPSXJUIPVUTVCXPPGFST
t1PSUBCMF1"4ZTUFNTGPS"7TQFFDIBOENVMUJNFEJBQMBZCBDL
t1FSJQIFSBMTVQQPSUGPSPUIFS&9&4%&4$MBTTJDBOE7)%QSPEVDUT
t)JHIRVBMJUZTUVEJPNPOJUPSJOH
t$PNQBDUNPOJUPSJOHBOEVOEFSCBMDPOZBQQMJDBUJPOT
Description:
5IF&4%JTBWFSZIJHIRVBMJUZXBZGVMMSBOHFDPNQBDUQBTTJWFMPVETQFBLFSTPMVUJPOXJUIPVUQVU
UIBUEFöFTJUTTJ[F8JUIFYDFQUJPOBMDMBSJUZGPSTQFFDIBOENVTJDBMSFQSPEVDUJPOUIF&4%JTQFSGFDU
GPSEJTDSFFUJOTUBMMBUJPOTBOEBVEJPWJTVBMQSFTFOUBUJPOTXIFSFTPVOERVBMJUZJTQBSBNPVOUCVUTJ[F
BMTPNBUUFST&RVBMMZBUIPNFBTBIJHIFOETUVEJPNPOJUPSUIF&4%GFBUVSFTTUBUFPGUIFBSU
DPNQPOFOUTBOEBSFWPMVUJPOBSZOFXQBTTJWFEFMBZMJOF
*UJTEFTJHOFEBDDPSEJOHUP,7"VEJPhTQIJMPTPQIJFTBOEPòFSTFOIBODFEEZOBNJDSBOHFJODSFBTFE
SFTPMVUJPOBOEIJHIPVUQVUXJUIJODSFEJCMZMPXEJTUPSUJPO5IF&4%IBTBWFSZHPPECBMBODFE
GSFRVFODZSFTQPOTFBOEBDDVSBUFDIBSBDUFSJTUJDTBDIJFWFECZJUTFMFDUSPOJDBOEBDPVTUJDEFTJHO
5IF&4%GFBUVSFTBQSPGFTTJPOBM#BMUJD#JSDIDPOTUSVDUJPOXJUIBXFBSSFTJTUBOUQPMZNFSDPBUJOHBOEB
TQFDJBMMZEFTJHOFEIBOEMFGPSTJNQMJöFEIBOEMJOHBOEDBSSZJOH&4%JTBMTPBWBJMBCMFJOBOZ3"-DPMPVS
XIJUF3"-POTUPDL
Connection:
5IFMPVETQFBLFSTZTUFNJTDPOOFDUFEUPBOBNQMJöFSVTJOH4QFBDPO/-DPOOFDUPSTPSUIFUFSNJOBM
CPBSE5IFDPOOFDUPSTBSFJOUFSDPOOFDUFEJOQBSBMMFMUPDPOOFDUNPSFMPVETQFBLFSTZTUFNT
1"3"--&-$0//&$5*0/0'5)&&4%Ȱ505"-*.1&%"/$&Ȱ
.0%&-/6.#&3
ESD6
KVV 987 206
1"35/6.#&3
ESD6
Overview
Overview
ESD6
Installation
Installation
5
MODEL NUMBER:
ESD6 “U” HORIZONTAL BRACKET
KVV 987 222
PRODUCT CODE:
MODEL NUMBER:
EX6, ESD6 “U” VERTICAL BRACKET
KVV 987 148
PRODUCT CODE:
Installation:
Installations should be carried out using KV2 Audio’s horizontal or vertical U brackets. They are
mounted vertically using M10 points located on the side of the cabinet or in the top handle and
bottom M10 plate (supplied with horizontal bracket) for horizontal xing and to a mounting post with
a diameter of 35mm using a support ange.
The ESD6 also features a 35mm speaker pole mount adapter housed at the bottom of the cabinet for
use with conventional speaker stands and poles.
220
395 244
122
244
197.5
122
122
110
110
Vertical Polarplots
Horizontal Polarplots
50 Hz - 200 Hz, 6 dB/div 500 Hz - 2 kHz, 6 dB/div 4 kHz - 16 kHz, 6 dB/div
Frequency response
0°
-30°
-60°
-90°
-120°
-150°
-180°
150°
120°
90°
60°
30°
0°
-30°
-60°
-90°
-120°
-150°
-180°
150°
120°
90°
60°
30°
0°
-30°
-60°
-90°
-120°
-150°
-180°
150°
120°
90°
60°
30°
90°
60°
30°
0°
-30°
-60°
-90°
-120°
-150°
-180°
150°
120°
90°
60°
30°
0°
-30°
-60°
-90°
-120°
-150°
-180°
150°
120°
90°
60°
30°
0°
-30°
-60°
-90°
-120°
-150°
-180°
150°
120°
50 Hz
100 Hz
200 Hz
500Hz
1kHz
2 kHz
4 kHz
8 kHz
16 kHz
50 Hz
100 Hz
200 Hz
500Hz
1kHz
2 kHz
4 kHz
8 kHz
16 kHz
ESD6
Frequency characteristics
Frequency characteristics
6
ESD6 Specications:
System Acoustic Perfomance
Max SPL Lon
g
-term 117dB
Max SPL Peak 120dB
-3dB Res
p
onse 68Hz - 20kHz
Recommended Power 175W
Sensitivit
y
92dB
Im
p
edance 16Ω
Crossover Point 2.0kHz
High Frequency Section
Acoustic Desi
g
nHorn Loaded
Hi
g
h Horn Covera
g
e Horizontal / Vertical 100° x 100°
Throat Exit Diameter / Dia
p
hra
g
m Size 1" / 1.75"
Dia
p
hra
g
m Material Titanium
Ma
g
net T
yp
eNeod
y
mium
Protection RMS Limiter
Low Frequency Section
Acoustic Desi
g
nFront Loaded, Bass Reex
Woofer Size / Voice Coil Diameter / Desi
g
n6" / 1.75" / Trans Coil
Ma
g
net T
yp
eNeod
y
mium
Dia
p
hra
g
m Material E
p
ox
y
Reinforced Cellulose
Protection RMS Limiter
Speaker Input
S
p
eaker In
p
ut 2x Neutrik S
p
eakon®, Terminal Block
Cabinet
Cabinet Material Baltic birch
Handles 1
Pole Mount 35mm
Color "Oran
g
e
p
eeled" Matt Black or an
y
RAL
Ph
y
sical Dimensions
Hei
g
ht 390mm (15.35”)
Width 220mm (8.66")
De
p
th 240mm (9.45”)
Wei
g
ht 9.5k
g
(20.9lbs.)
ESD6
Specications
Specications
7
SERIAL NUMBER
PARALLEL
8 Ohms / 350 Watts
FULL RANGE
+ (1+, 2+) + (1+, 2+)
SERIAL NUMBER
PARALLEL
8 Ohms / 350 Watts
FULL RANGE
+ (1+, 2+) + (1+, 2+)
PARALLEL CONNECTION OF THE ESD36 (8Ω) - TOTAL IMPEDANCE 2Ω
ESD36
Description:
The ESD36 is a passive, full-range 3-way speaker system designed for
speech and music reproduction. The ESD36 features a 6” driver dedicated
to high-quality mid-range reproduction and a further two low frequency
6” drivers for enhanced bass extension. Alongside the same compression
driver as the popular EX6, the ESD36 oers comparable performance to
many larger cabinets with an strong vocal performance from the 3-way
design.
Application:
tHigh quality xed installations with or without subwoofers
tPortable PA Systems for AV, speech and multimedia playback
tPeripheral support for other EX, ESD, ES, Classic and VHD products
tSmall to medium-sized Live Music applications
tCompact monitoring and under balcony applications
It is designed according to KV2 Audio's philosophies and oers enhanced dynamic range, increased
resolution and high output with incredibly low distortion gures. The ESD36 has a very good balanced
frequency response and exceptional phase characteristics achieved by its electronic and acoustic
design.
The balanced phase characteristic is achieved by means of a unique dividing network containing a
revolutionary passive delay line. The ESD36 also boasts electronic protection and monitors the
maximum signal level and tweeter RMS signal. The 6” woofers are protected by a reverse thermal
circuit-breaker (autoreset).
The ESD36 features a professional Baltic Birch construction with a wear resistant polymer coating and
a specially designed handle for simplied handling and carrying. ESD36 is also available in any RAL
colour (white RAL9003 on stock).
Connection:
The ESD36 features both Speakon (NL4) connectors and a terminal block. The connectors are
interconnected in parallel to allow the “daisy chaining“ of additional ESD36's.
SERIAL NUMBER
PARALLEL
8 Ohms / 350 Watts
FULL RANGE
+ (1+, 2+) + (1+, 2+)
SERIAL NUMBER
PARALLEL
8 Ohms / 350 Watts
FULL RANGE
+ (1+, 2+) + (1+, 2+)
MODEL NUMBER:
ESD36
KVV 987 224
PART NUMBER:
ESD36
Overview
Overview
8
ESD36
Installation
Installation
9
110
122 730.5
365.3
122
220
110
122
365.3
244
122
244
MODEL NUMBER:
ESD36 “U” HORIZONTAL BRACKET
KVV 987 244
PRODUCT CODE:
MODEL NUMBER:
ESD36 “U” VERTICAL BRACKET
KVV 987 243
PRODUCT CODE:
Installation:
Installations should be carried out using KV2 Audio’s horizontal or vertical U brackets. They are
mounted vertically using M10 points located on the side of the cabinet or in the top handle and
bottom M10 plate (supplied with horizontal bracket) for horizontal xing and to a mounting post with
a diameter of 35mm using a support ange.
The ESD36 also features a 35mm speaker pole mount adapter housed at the bottom of the cabinet for
use with conventional speaker stands and poles.
Horizontal Polarplots
50 Hz - 200 Hz, 6 dB/div 500 Hz - 2 kHz, 6 dB/div 4 kHz - 16 kHz, 6 dB/div
Frequency response
0°
-30°
-60°
-90°
-120°
-150°
-180°
150°
120°
90°
60°
30°
0°
-30°
-60°
-90°
-120°
-150°
-180°
150°
120°
90°
60°
30°
0°
-30°
-60°
-90°
-120°
-150°
-180°
150°
120°
90°
60°
30°
50 Hz
100 Hz
200 Hz
500Hz
1kHz
2 kHz
4 kHz
8 kHz
16 kHz
ESD36
Frequency characteristics
Frequency characteristics
10
ESD36 Specications:
System Acoustic Perfomance
Max SPL Lon
g
-term 122dB
Max SPL Peak 125dB
-3dB Res
p
onse 65Hz - 25kHz
Recommended Power 350W
Sensitivit
y
94dB
Im
p
edance 8Ω
Crossover Point 600Hz, 2.5kHz
High Frequency Section
Acoustic Desi
g
nHorn Loaded
Hi
g
h Horn Covera
g
e Horizontal / Vertical 100° x 100°
Throat Exit Diameter / Dia
p
hra
g
m Size 1" / 1.75"
Dia
p
hra
g
m Material Nitride Titanium
Ma
g
net T
yp
eNeod
y
mium
Protection RMS Limiter
Mid Range Section
Acoustic Desi
g
nLow Inductance Li
g
htwei
g
ht
Woofer Size / Voice Coil Diameter / Desi
g
n6" / 1.75"
Dia
p
hra
g
m Material E
p
ox
y
Reinforced Cellulose
Ma
g
net T
yp
eNeod
y
mium
Protection RMS Limiter
Low Frequency Section
Acoustic Desi
g
nFront Loaded, Bass Reex
Woofer Size / Voice Coil Diameter / Desi
g
n2 x 6" / 1.75"
Dia
p
hra
g
m Material E
p
ox
y
Reinforced Cellulose
Ma
g
net T
yp
eNeod
y
mium
Protection RMS Limiter
Speaker Input
S
p
eaker In
p
ut 2x Neutrik S
p
eakon®, Terminal Block
Cabinet
Cabinet Material Baltic birch
Handles 1
Pole Mount 35mm
Color "Oran
g
e
p
eeled" Matt Black or an
y
RAL
Ph
y
sical Dimensions
Hei
g
ht 730,5mm (28.76”)
Width 220mm (8.66")
De
p
th 240mm (9.45”)
Wei
g
ht 19k
g
(41.9lbs.)
ESD36
Specications
Specications
11
D
SERIAL NUMBER
PARALLEL INPUTS
FULL RANGE 500Watts
AUTO RESET PROTECTION
4 Ohms
+ (1+, 2+) + (1+, 2+)
D
SERIAL NUMBER
PARALLEL INPUTS
FULL RANGE 500Watts
AUTO RESET PROTECTION
4 Ohms
+ (1+, 2+) + (1+, 2+)
PARALLEL CONNECTION OF THE ESD10 (4Ω) - TOTAL IMPEDANCE 2Ω
ESD10
Application:
tHigh quality xed installations with or without subwoofers
tPortable PA Systems for AV, speech and multimedia playback
tPeripheral support for other EX, ESD, ES, Classic and VHD products
tSmall to medium-sized Live Music applications
tHigh quality studio monitoring
tFloor monitoring and under balcony applications
Description:
The ESD10 is a very compact passive 2-way, high output, full-range loudspeaker. Despite its 10”
woofer and remarkably small footprint it successfully outperforms many larger 12” models and oers
incredible quality and tremendous output. The ESD10 features KV2 Audio’s revolutionary passive
delay line that ensures that it is incredibly balanced, accurate and phase coherent.
It is designed according to KV2 Audio’s philosophies and oers enhanced dynamic range, increased
resolution and high output with exceptionally low distortion gures. The ESD10 has a very good
balanced frequency response and accurate phase characteristics achieved by its electronic and
acoustic design.
The low distortion gures are achieved using a 10” Super Acoustic Active Impedance Control
loudspeaker with zero inductance specically developed by KV2 Audio. The balanced phase
characteristic is achieved by means of a unique dividing network containing a revolutionary passive
delay line. The ESD10 also boasts electronic protection and monitors the maximum signal level and
tweeter RMS signal. The 10” woofer is protected by a reverse thermal-circuit breaker (autoreset).
The ESD10 features a professional Baltic Birch construction with a wear resistant polymer coating and
a specially designed handle for simplied handling and carrying. ESD10 is also available in any RAL
colour (white RAL9003 on stock).
Connection:
The ESD10 features both Speakon (NL4) connectors and a terminal block. The connectors are
interconnected in parallel to allow the “daisy chaining“ of additional ESD10's.
MODEL NUMBER:
ESD10
KVV 987 207
PART NUMBER:
ESD10
Overview
Overview
12
MODEL NUMBER:
EX10,ESD10 “U” HORIZONTAL BRACKET
KVV 987 036
PRODUCT CODE:
MODEL NUMBER:
EX10, ESD10 “U” VERTICAL BRACKET
KVV 987 033
PRODUCT CODE:
Installation:
Installations should be carried out using KV2 Audio’s horizontal or vertical U brackets. They are
mounted vertically using M10 points located on the side of the cabinet or in the top handle and
bottom M10 plate (supplied with horizontal bracket) for horizontal xing and to a mounting post
with a diameter of 35mm using a support ange.
The ESD10 also features a 35mm speaker pole mount adapter housed at the bottom of the cabinet
for use with conventional speaker stands and poles.
324
164
155
310
514
257
174
324
155
164
ESD10
Installation
Installation
13
Vertical Polarplots
Horizontal Polarplots
50 Hz - 200 Hz, 6 dB/div 500 Hz - 2 kHz, 6 dB/div 4 kHz - 16 kHz, 6 dB/div
Frequency response
0°
-30°
-60°
-90°
-120°
-150°
-180°
150°
120°
90°
60°
30°
0°
-30°
-60°
-90°
-120°
-150°
-180°
150°
120°
90°
60°
30°
0°
-30°
-60°
-90°
-120°
-150°
-180°
150°
120°
90°
60°
30°
90°
60°
30°
0°
-30°
-60°
-90°
-120°
-150°
-180°
150°
120°
90°
60°
30°
0°
-30°
-60°
-90°
-120°
-150°
-180°
150°
120°
90°
60°
30°
0°
-30°
-60°
-90°
-120°
-150°
-180°
150°
120°
50 Hz
100 Hz
200 Hz
500Hz
1kHz
2 kHz
4 kHz
8 kHz
16 kHz
50 Hz
100 Hz
200 Hz
500Hz
1kHz
2 kHz
4 kHz
8 kHz
16 kHz
ESD10
Frequency characteristics
Frequency characteristics
14
ESD10 Specications:
System Acoustic Perfomance
Max SPL Lon
g
-term 125dB
Max SPL Peak 128dB
-3dB Res
p
onse 65Hz - 20kHz
Recommended Power 500W
Sensitivit
y
96dB
Im
p
edance 4Ω
Crossover Point 1.8kHz
High Frequency Section
Acoustic Desi
g
nHorn Loaded
Hi
g
h Horn Covera
g
e Horizontal / Vertical 100° x 90°
Rotatable Horn YES
Throat Exit Diameter / Dia
p
hra
g
m Size 1" / 1.75"
Dia
p
hra
g
m Material Titanium
Ma
g
net T
yp
eNeod
y
mium
Protection RMS Limiter
Low Frequency Section
Acoustic Desi
g
nFront Loaded, Bass Reex
Woofer Size / Voice Coil Diameter / Desi
g
n10" / 2.5"
Dia
p
hra
g
m Material E
p
ox
y
Reinforced Cellulose
Ma
g
net T
yp
eNeod
y
mium
Protection RMS Limiter
Speaker Input
S
p
eaker In
p
ut 2x Neutrik S
p
eakon®, Terminal Block
Cabinet
Cabinet Material Baltic birch
Handles 1
Pole Mount 35mm
Color "Oran
g
e
p
eeled" Matt Black or an
y
RAL
Ph
y
sical Dimensions
Hei
g
ht 514mm (20.23”)
Width 310mm (12.20")
De
p
th 325mm (12.79”)
Wei
g
ht 16.5k
g
(36.8lbs.)
ESD10
Specications
Specications
15
D
SERIAL NUMBER
PARALLEL INPUTS
FULL RANGE 500Watts
AUTO RESET PROTECTION
4 Ohms
+ (1+, 2+) + (1+, 2+)
D
SERIAL NUMBER
PARALLEL INPUTS
FULL RANGE 500Watts
AUTO RESET PROTECTION
4 Ohms
+ (1+, 2+) + (1+, 2+)
PARALLEL CONNECTION OF THE ESD12 (4Ω) - TOTAL IMPEDANCE 2Ω
ESD12
Application:
tHigh quality xed installations with or without subwoofers
tPortable PA Systems for AV, speech and multimedia playback
tPeripheral support for other EX, ESD, ES and VHD products
tSmall to medium-sized Live Music applications
tHigh quality studio monitoring
tFloor monitoring applications
Description:
The ESD12 is a very high quality 2-way, passive 12” full-range loudspeaker. The ESD12 features a
revolutionary passive delay line which, along with the same 3” NVPD large format compression driver
found in KV2 Audio’s agship VHD products, makes the ESD12 one of the most balanced, phase
coherent and accurate compact, 2-way passive boxes on the market today.
It is designed according to KV2 Audio's philosophies and oers enhanced dynamic range, increased
resolution and high output with incredibly low distortion gures. The ESD12 has a very good balanced
frequency response and exceptional phase characteristics achieved by its electronic and acoustic
design.
The low distortion gures are achieved using a 12” Super Acoustic Active Impedance Control
loudspeaker with zero inductance specically developed by KV2 Audio. The balanced phase
characteristic is achieved by means of a unique dividing network containing a revolutionary passive
delay line. The ESD12 also boasts electronic protection and monitors the maximum signal level and
tweeter signal. The 12” woofer is protected by a reverse thermal-circuit breaker (autoreset).
The ESD12 features a professional Baltic Birch construction with a wear resistant polymer coating and
a specially designed handle for simplied handling and carrying. ESD12 is also available in any RAL
colour (white RAL9003 on stock).
Connection:
The ESD12 features both Speakon (NL4) connectors and a terminal block. The connectors are
interconnected in parallel to allow the “daisy chaining“ of additional ESD12’s.
MODEL NUMBER:
ESD12
KVV 987 199
PART NUMBER:
ESD12
Overview
Overview
16
MODEL NUMBER:
ESD12 “U” HORIZONTAL BRACKET
KVV 987 213
PRODUCT CODE:
MODEL NUMBER:
EX12, ESD12 “U” VERTICAL BRACKET
KVV 987 057
PRODUCT CODE:
Installation:
Installations should be carried out using KV2 Audio’s horizontal or vertical U brackets. They are
mounted vertically using M10 points located on the side of the cabinet or in the top handle and
bottom M10 plate (supplied with horizontal bracket) for horizontal xing and to a mounting post with
a diameter of 35mm using a support ange.
The ESD12 also features a 35mm speaker pole mount adapter housed at the bottom of the cabinet for
use with conventional speaker stands and poles.
368
619
190
208
309.5
190
184
368
368
184
ESD12
Installation
Installation
17
Vertical Polarplots
50 Hz
100 Hz
200 Hz
500Hz
1kHz
2 kHz
4 kHz
8 kHz
16 kHz
Horizontal Polarplots
50 Hz - 200 Hz, 6 dB/div 500 Hz - 2 kHz, 6 dB/div 4 kHz - 16 kHz, 6 dB/div
Frequency response
0°
-30°
-60°
-90°
-120°
-150°
-180°
150°
120°
90°
60°
30°
0°
-30°
-60°
-90°
-120°
-150°
-180°
150°
120°
90°
60°
30°
0°
-30°
-60°
-90°
-120°
-150°
-180°
150°
120°
90°
60°
30°
90°
60°
30°
0°
-30°
-60°
-90°
-120°
-150°
-180°
150°
120°
90°
60°
30°
0°
-30°
-60°
-90°
-120°
-150°
-180°
150°
120°
90°
60°
30°
0°
-30°
-60°
-90°
-120°
-150°
-180°
150°
120°
50 Hz
100 Hz
200 Hz
500Hz
1kHz
2 kHz
4 kHz
8 kHz
16 kHz
ESD12
Frequency characteristics
Frequency characteristics
18
ESD12 Specications:
System Acoustic Perfomance
Max SPL Lon
g
-term 127dB
Max SPL Peak 130dB
-3dB Res
p
onse 55Hz - 22kHz
Recommended Power 500W
Sensitivit
y
98dB
Im
p
edance 4Ω
Crossover Point 1.2kHz
High Frequency Section
Acoustic Desi
g
nHorn Loaded
Hi
g
h Horn Covera
g
e Horizontal / Vertical 80° x 40°
Rotatable Horn YES
Throat Exit Diameter / Dia
p
hra
g
m Size 1" / 3"
Dia
p
hra
g
m Material Nitride Titanium
Ma
g
net T
yp
eNeod
y
mium
Protection RMS Limiter
Low Frequency Section
Acoustic Desi
g
nFront Loaded, Bass Reex
Woofer Size / Voice Coil Diameter / Desi
g
n12" / 2.5" / Trans Coil
Dia
p
hra
g
m Material E
p
ox
y
Reinforced Cellulose
Ma
g
net T
yp
eNeod
y
mium
Protection Thermal breaker - autoreset
Speaker Input
S
p
eaker In
p
ut 2x Neutrik S
p
eakon®, Terminal Block
Cabinet
Cabinet Material Baltic birch
Handles 1
Pole Mount 35mm
Color "Oran
g
e
p
eeled" Matt Black or an
y
RAL
Ph
y
sical Dimensions ESD12
Hei
g
ht 606mm (23.86”)
Width 368mm (14.48")
De
p
th 368mm (14.48")
Wei
g
ht 23k
g
(50.7lbs.)
ESD12
Specications
Specications
19
SERIAL NUMBER
PARALLEL INPUTS
AUTO RESET PROTECTION
4 Ohms
+ (1+, 2+) + (1+, 2+) SERIAL NUMBER
PARALLEL INPUTS
AUTO RESET PROTECTION
4 Ohms
+ (1+, 2+) + (1+, 2+)
PARALLEL CONNECTION OF THE ESD15 (4Ω) - TOTAL IMPEDANCE 2Ω
ESD15
Application:
t4QFDJöDBMMZEFTJHOFEBTBUSVFGVMMSBOHF
QBTTJWFMPVETQFBLFS
t)JHIRVBMJUZöYFEJOTUBMMBUJPOTXJUIPVUTVCXPPGFST
t1PSUBCMF1"4ZTUFNTGPS"7TQFFDIBOENVMUJNFEJBQMBZCBDL
t1FSJQIFSBMTVQQPSUGPSPUIFS&9&4%&4BOE7)%QSPEVDUT
t4NBMMUPNFEJVNTJ[FE-JWF.VTJDBQQMJDBUJPOT
t)JHIRVBMJUZTUVEJPNPOJUPSJOH
Description:
5IF&4%JTBWFSZIJHI2VBMJUZXBZQBTTJWFwXPPGFSwNJESBOHFw)'QVSQPTFEFTJHOFE'VMM
3BOHF-PVETQFBLFS
&4%JTPOFPGUIFNPTUCBMBODFE1IBTFDPIFSFOUBOEBDDVSBUFDPNQBDUXBZFODMPTVSFTDVSSFOUMZ
BWBJMBCMF
$PNNPOEFTJHOGFBUVSFTPGUSBEJUJPOBMwwEFTJHOTDPNNPOMZFYIJCJUQSPCMFNTXJUIBUUFNQUJOH
UPDPSSFDUMZSFQSPEVDFNJESBOHFGSFRVFODJFT)[,I[
5IF&4%GFBUVSFTBCFTQPLFEFTJHOFERVBMJUZwNJESBOHFESJWFSUPTPMWFUIFTFSFDPHOJ[FE
QSPCMFNTBOEUIFTFUVQSFTVMUTJOBOWFSZIJHIEFöOJUJPOPWFSUIFGVMMCBOEXJEUIQFSGPSNBODF
*ODPOKVODUJPOXJUI,7"VEJP1IJMPTPQIJFTUIF&4%QSFTFOUTFOIBODFE%ZOBNJD3BOHFJODSFBTFE
SFTPMVUJPOBOEIJHIPVUQVUXJUIFYUSFNFMZMPXEJTUPSUJPOöHVSFT
5IFöOFMZCBMBODFEGSFRVFODZSFTQPOTFBOEFYDFQUJPOBMQIBTFDIBSBDUFSJTUJDTBSFBDIJFWFECZJUT
FMFDUSPOJDBOEBDPVTUJDEFTJHOGFBUVSJOHOPUBCMZUIFSFWPMVUJPOBSZQBTTJWFDSPTTPWFSXJUIEFMBZMJOF
&MFDUSPOJDQSPUFDUJPONPOJUPSTBOEDPOUSPMTNBYJNVNTJHOBMMFWFMTXIJMTUUIFwXPPGFSJTQSPUFDUFE
CZBSFWFSTFUIFSNBMDJSDVJUCSFBLFSBVUPSFTFU
5IF&4%JODPSQPSBUFTBQSPGFTTJPOBM#BMUJD#JSDIDPOTUSVDUJPOBOEFODMPTVSFXJUIBXFBSSFTJTUBOU
QPMZNFSDPBUJOHBOEQVSQPTFEFTJHOFEIBOEMFGPSTJNQMJöFEIBOEMJOHBOEDBSSZJOH
"WBJMBCMFJOBOZ3"-DPMPVSCZTQFDJBMPSEFS8IJUF3"-POTUPDL
Connection:
5IF&4%GFBUVSFTCPUI4QFBLPO/-DPOOFDUPSTBOEBUFSNJOBMCMPDL5IFDPOOFDUPSTBSF
JOUFSDPOOFDUFEJOQBSBMMFMUPBMMPXUIFiEBJTZDIBJOJOHiPGBEEJUJPOBM&4%T
.0%&-/6.#&3
ESD15
KVV 987 313
1"35/6.#&3
FULL RANGE 600Watts
DFULL RANGE 600Watts
D
ESD15
Overview
Overview

Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28

KV2 Audio ESD6 User manual

KV2 Audio
Brand
KV2 Audio
Model
ESD6
Category
Loudspeakers
Type
User manual

KV2 Audio ESD6 is a professional full-range loudspeaker system designed for a variety of applications, including live music, DJ performances, and sound reinforcement. It features a 6" woofer for clear and punchy bass, a 6" midrange driver for natural vocals, and a 1" compression driver for crisp highs. The ESD6 delivers a wide frequency response of 68Hz to 20kHz and can handle up to 175 watts of power, making it ideal for use in both small and large venues.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents