Tyan S7063 User manual

http://www.tyan.com

1

S7063

Version 1.0

Copyright

this manual may be reproduced or translated without prior written consent from

MiTAC International Corporation.

Trademark

All registered and unregistered trademarks and company names contained in this

manual are property of their respective owners including, but not limited to the

following.

TYAN

®

is a trademark of MiTAC International Corporation.

Intel

®

is a trademark of Intel

®

Corporation.

AMI, AMI BIOS are trademarks of AMI Technologies.

Microsoft

®

, Windows

®

are trademarks of Microsoft Corporation.

Winbond

®

is a trademark of Winbond Electronics Corporation.

Notice

Information contained in this document is furnished by MiTAC International

Corporation and has been reviewed for accuracy and reliability prior to printing.

MiTAC assumes no liability whatsoever, and disclaims any express or implied

warranty, relating to sale and/or use of TYAN

®

products including liability or

warranties relating to fitness for a particular purpose or merchantability. MiTAC

retains the right to make changes to product descriptions and/or specifications at

any time, without notice. In no event will MiTAC be held liable for any direct or

indirect, incidental or consequential damage, loss of use, loss of data or other

malady resulting from errors or inaccuracies of information contained in this

document.

http://www.tyan.com

2

About this guide

This user guide contains the information you need when installing and configuring

the motherboard.

How this guide is organized

This guide contains the following parts:

Chapter1: Instruction

This chapter describes the features of the motherboard and the new technology it

supports.

Chapter2: Board Installation

This chapter lists the hardware setup procedures that you need to abide by when

installing system components. It includes description of the jumpers and connectors

on the motherboard.

Chapter3: BIOS Setup

This chapter tells how to change system settings through the BIOS setup menu.

Detailed descriptions of the BIOS parameters are also provided.

Chapter4: Diagnostics

This chapter introduces some BIOS codes and technical terms to provide better

service for the customers.

Appendix: Fan and Temp Sensors

This section aims to help readers identify the locations of some specific Fan and

Temp Sensors on the motherboard. A table of BIOS Temp sensor name

explanation is also included for readers’ reference.

http://www.tyan.com

3

Contents

Before you begin…....................................................................................4

Chapter 1: Instruction ................................................................................5

1.1 Congratulations .................................................................................5

1.2 Hardware Specifications....................................................................5

1.3 Software Specifications.....................................................................9

Chapter 2: Board Installation................................................................... 11

2.1 Board Image....................................................................................12

2.2 Block Diagram.................................................................................13

2.3 Mainboard Mechanical Drawing......................................................14

2.4 Board Parts, Jumpers and Connectors...........................................15

2.5 Installing the Processor and Heatsink.............................................25

2.6 Thermal Interface Material ..............................................................29

2.7 Tips on Installing Motherboard in Chassis ......................................30

2.8 Installing the Memory ......................................................................32

2.9 Attaching Drive Cables....................................................................38

2.10 Installing Add-In Cards..................................................................39

2.11 Connecting External Devices ........................................................40

2.12 Installing the Power Supply...........................................................42

2.13 Finishing Up...................................................................................42

Chapter 3: BIOS Setup .............................................................................43

3.1 About the BIOS................................................................................43

3.2 Main Menu.......................................................................................45

3.3 Advanced Menu...............................................................................46

3.4 Chipset Menu ..................................................................................72

3.5 Boot .................................................................................................82

3.6 Security............................................................................................88

3.7 Server Management........................................................................93

3.8 Event Logs.......................................................................................96

3.9 Save & Exit......................................................................................97

Chapter 4: Diagnostics............................................................................. 99

4.1 Flash Utility......................................................................................99

4.2 AMIBIOS Post Code (Aptio)..........................................................100

Appendix: Fan and Temp Sensors........................................................107

Glossary................................................................................................... 111

Technical Support ..................................................................................117

http://www.tyan.com

4

Before you begin…

Check the box contents!

The retail motherboard package should contain the following:

1 x S7063 Motherboard

2 x SATA Single Cable

1 x Mini-SAS to SATAx4 Cable

1 x S7063 Quick Installation Guide

1 x TYAN

®

Driver CD

IMPORTANT NOTE:

Sales samples may not come with any of the accessories listed above.

If you have ordered a sales sample and you are missing any of the above items,

please contact your sales representative to help order accessories.

http://www.tyan.com

5

Chapter 1: Instruction

1.1 Congratulations

You have purchased the powerful TYAN

®

S7063 motherboard, based on the

Intel

®

Patsburg (C602) chipset. The S7063 is designed to support dual Intel

®

Xeon E5-2600 Series processors, and up to 128GB UDIMM / 256GB RDIMM /

512GB LRDIMM DDR3 memory. Leveraging advanced technology from Intel

®

,

the S7063 is capable of offering scalable 32 and 64-bit computing, high-

bandwidth memory design, and lightning-fast PCI-E bus implementation.

The S7063 not only empowers you in today’s demanding IT environment but also

offers a smooth path for future application upgradeability. All of these rich feature

sets provide the S7063 with the power and flexibility to meet demanding

requirements for today’s IT environments.

Remember to visit the TYAN

®

website at http://www.tyan.com. There you can find

all the information on all TYAN

®

products as well as all the supporting

documentation, FAQs, Drivers and BIOS upgrades.

1.2 Hardware Specifications

TYAN S7063 (S7063WGM3NR-2T)

Supported CPU

Series

Intel Xeon Processor E5-2600 Series

Socket Type / Q'ty LGA2011 / (2)

Thermal Design

Power (TDP)

wattage

Max up to 130W

Processor

System Bus

Up to 8.0/ 7.2/ 6.4 GT/s with Intel QuickPath

Interconnect (QPI) support

Chipset PCH Intel C602

DIMM Type / Speed

RDIMM ECC 1600/1333/1066 / UDIMM/LRDIMM ECC

1333/1066

Capacity

up to 128GB UDIMM / 256GB RDIMM / 512GB

LRDIMM

Memory channel 4 Channels per CPU

Memory

Memory voltage 1.5V or 1.35V

Expansion

Slots

PCI-E (1) PCI-E x8 Gen.3 slot

Port Q'ty (2) 10GbE SFP+ + (1) GbE RJ45 shared with IPMI

LAN

Controller Intel 82574L / Intel 82599ES

http://www.tyan.com

6

Connector (2) Mini-SAS connectors (totally support 8 ports)

Controller LSI SAS2308

Speed 6.0 Gb/s

SAS

RAID RAID 0/1/1E/10 (LSI Integrated RAID)

Connector

(1) Mini-SAS (4-ports) + (2) SATA (totally support 6

ports)

Controller Intel C602

Speed

(2) 6.0 Gb/s (blue color), (4) 3.0 Gb/s (mini-SAS

connector)

Storage

SATA

RAID RAID 0/1/10/5 (Intel RST)

Connector type D-Sub 15-pin

Resolution Up to 1920x1200

Graphic

Chipset Aspeed AST2300

USB

(5) USB2.0 ports (2 at rear, 2 via cable, 1 type A

onboard)

COM (2) ports (1 at rear, 1 via cable)

SAS (2) Mini-SAS (4-in-1) connectors

VGA (1) D-Sub 15-pin VGA port

SFP+ (2) 10GbE ports

RJ-45 (1) GbE port

Power SSI 24-pin + 8-pin + 8-pin power connectors

Input /Output

SATA

(2) SATA-III connectors + (1) Mini-SAS (4-in-1)

connectors

Chipset Aspeed AST2300

Voltage

Monitors voltage for CPU, memory, chipset & power

supply

Fan Total (5) 4-pin headers

Temperature Monitors temperature for CPU & memory

System

Monitoring

LED

Fan fail LED indicator / Over temperature warning

indicator / Fan & PSU fail LED indicator

Onboard Chipset Onboard Aspeed AST2300

AST2300 IPMI

Feature

IPMI 2.0 compliant baseboard management controller

(BMC) / Supports storage over IP and remote

platform-flash / USB 2.0 virtual hub

Server

Management

AST2300 iKVM

Feature

24-bit high quality video compression / 10/100/1000

Mb/s MAC interface

Brand / ROM size AMI / 8MB

BIOS

Feature

Plug and Play (PnP) /PCI2.3 /WfM2.0 /SMBIOS2.3

/PXE boot / ACPI 2.0 power management /Power on

mode after power recovery / User-configurable H/W

monitoring / Auto-configurable of hard disk types

Form Factor EATX

Physical

Dimension

Board Dimension 12"x13" (305x330mm)

Operating OS supported list Please refer to our Intel OS supported list.

http://www.tyan.com

7

System

FCC (DoC) Class A

Regulation

CE (DoC) Yes

Operating Temp. 10° C ~ 35° C (50° F~ 95° F)

Non-operating

Temp.

- 40° C ~ 70° C (-40° F ~ 158° F)

Operating

Environment

In/Non-operating

Humidity

90%, non-condensing at 35° C

RoHS RoHS 6/6 Compliant Yes

Motherboard (1) S7063 Motherboard

Manual (1) Quick Installation Guide

Installation CD (1) TYAN installation CD

Package

Contains

Cable SATA

(2) SATA signal cables / (1) Mini-SAS cable to 4 x

SATA cables

TYAN S7063 (S7063GM3NR-2T)

Supported CPU

Series

Intel Xeon Processor E5-2600 Series

Socket Type / Q'ty LGA2011 / (2)

Thermal Design

Power (TDP)

wattage

Max up to 130W

Processor

System Bus

Up to 8.0/ 7.2/ 6.4 GT/s with Intel QuickPath

Interconnect (QPI) support

Chipset PCH Intel C602

DIMM Type / Speed

RDIMM ECC 1600/1333/1066 / UDIMM/LRDIMM ECC

1333/1066

Capacity

up to 128GB UDIMM / 256GB RDIMM / 512GB

LRDIMM

Memory channel 4 Channels per CPU

Memory

Memory voltage 1.5V or 1.35V

Expansion

Slots

PCI-E (1) PCI-E x8 Gen.3 slot

Port Q'ty (2) 10GbE SFP+ + (1) GbE RJ45 shared with IPMI

LAN

Controller Intel 82574L / Intel 82599ES

Connector

(1) Mini-SAS (4-ports) + (2) SATA (totally support 6

ports)

Controller Intel C602

Speed

(2) 6.0 Gb/s (blue color), (4) 3.0 Gb/s (mini-SAS

connector)

Storage SATA

RAID RAID 0/1/10/5 (Intel RST)

Graphic Connector type D-Sub 15-pin

http://www.tyan.com

8

Chipset Aspeed AST2300

USB

(5) USB2.0 ports (2 at rear, 2 via cable, 1 type A

onboard)

COM (2) ports (1 at rear, 1 via cable)

VGA (1) D-Sub 15-pin VGA port

RJ-45 (1) GbE port

SFP+ (2) 10GbE ports

Power SSI 24-pin + 8-pin + 8-pin power connectors

Input /Output

SATA

(2) SATA-III connectors + (1) Mini-SAS (4-in-1)

connectors

Chipset Aspeed AST2300

Voltage

Monitors voltage for CPU, memory, chipset & power

supply

Fan Total (5) 4-pin headers

Temperature Monitors temperature for CPU & memory

System

Monitoring

LED

Fan fail LED indicator / Over temperature warning

indicator / Fan & PSU fail LED indicator

Onboard Chipset Onboard Aspeed AST2300

AST2300 IPMI

Feature

IPMI 2.0 compliant baseboard management controller

(BMC) / Supports storage over IP and remote

platform-flash / USB 2.0 virtual hub

Server

Management

AST2300 iKVM

Feature

24-bit high quality video compression / 10/100/1000

Mb/s MAC interface

Brand / ROM size AMI / 8MB

BIOS

Feature

Plug and Play (PnP) /PCI2.3 /WfM2.0 /SMBIOS2.3

/PXE boot / ACPI 2.0 power management /Power on

mode after power recovery / User-configurable H/W

monitoring / Auto-configurable of hard disk types

Form Factor EATX

Physical

Dimension

Board Dimension 12"x13" (305x330mm)

Operating

System

OS supported list Please refer to our Intel OS supported list.

FCC (DoC) Class A

Regulation

CE (DoC) Yes

Operating Temp. 10° C ~ 35° C (50° F~ 95° F)

Non-operating

Temp.

- 40° C ~ 70° C (-40° F ~ 158° F)

Operating

Environment

In/Non-operating

Humidity

90%, non-condensing at 35° C

RoHS RoHS 6/6 Compliant Yes

Motherboard (1) S7063 Motherboard Package

Contains

Manual (1) Quick Installation Guide

http://www.tyan.com

9

Cable SATA

(2) SATA signal cables

(1) Mini-SAS cable to 4 x SATA cables

1.3 Software Specifications

For the latest OS (operation system) support and IPMI Configuration Guide, please

visit our Web site for information.

http://www.tyan.com

10

NOTE

http://www.tyan.com

11

Chapter 2: Board Installation

You are now ready to install your motherboard.

How to install our products right… the first time

The first thing you should do is read this user’s manual. It contains important

information that will make configuration and setup much easier. Here are some

precautions you should take when installing your motherboard:

(1) Ground yourself properly before removing your motherboard from the

antistatic bag. Unplug the power from your computer power supply and

then touch a safely grounded object to release static charge (i.e. power

supply case). For the safest conditions, MiTAC recommends wearing a

static safety wrist strap.

(2) Hold the motherboard by its edges and do not touch the bottom of the

board, or flex the board in any way.

(3) Avoid touching the motherboard components, IC chips, connectors,

memory modules, and leads.

(4) Place the motherboard on a grounded antistatic surface or on the antistatic

bag that the board was shipped in.

(5) Inspect the board for damage.

The following pages include details on how to install your motherboard into your

chassis, as well as installing the processor, memory, disk drives and cables.

Caution!

1. To avoid damaging the motherboard and associated

components, do not use torque force greater than

7kgf/cm (6.09 lb/in) on each mounting screw for

motherboard installation.

2. Do not apply power to the board if it has been

damaged.

http://www.tyan.com

12

2.1 Board Image

S7063

This picture is representative of the latest board revision available at the time of

publishing. The board you receive may not look exactly like the above picture.

http://www.tyan.com

13

2.2 Block Diagram

S7063 Block Diagram

http://www.tyan.com

14

2.3 Mainboard Mechanical Drawing

http://www.tyan.com

15

2.4 Board Parts, Jumpers and Connectors

This diagram is representative of the latest board revision available at the time of

publishing. The board you receive may not look exactly like the above diagram. The

DIMM slot numbers shown above can be used as a reference when reviewing the

DIMM population guidelines shown later in the manual. For the latest board

revision, please visit our web site at http://

www.tyan.com.

http://www.tyan.com

16

Connectors, Jumpers & Slots

Headers

1 USB2.0 ports and LAN Port #3 (LAN3,

shared with IPMI port)

22 SATA2-5

2 Type-A USB Connector (J24) 23 SAS4-7

3 COM Port/VGA Port 24 SAS0-3

4 Port 80 Header (J28) 25 Front Panel Header (J39)

5 ID LED Button (J6) 26 LAN2 LED Header (J25)

6 LAN port#2 (LAN2) 27 CPU0 FAN Connector (J63)

7 LAN port#1 (LAN1) 28 Chassis Intrusion Header (J4)

8 BIOS 29 SYS_FAN_3 Connector (J64)

9 BMC 30 CPU Socket (CPU0)

10 PCH Software RAID KEY (J22) 31 SYS_FAN_2 Connector (J65)

11 ID LED (LED1) 32 SYS_FAN_1 Connector (J66)

12 Battery 33 8-pin Power Connector (PW3)

13 Power Button (J13) 34 CPU Socket (CPU1)

14 Reset Button (J18) 35 CPU1 FAN Connector (J45)

15 Flash Security Override Header (J68) 36 SYS_FAN_5 Connector (J19)

16 LSI IMR KEY (2PHD_1) 37 8-pin Power Connector (PW2)

17 USB Front Panel Header (blue, J26) 38 24-pin Power Connector (PW1)

18 LAN1 LED Header (J23) 39 SYS_FAN_4 Connector (J20)

19 SATA3.0 Connector (SATA1, J36) 40 PSMI Connector (J34)

20 SATA3.0 Connector (SATA0, J31) 41 Front Fan Connector (J14)

21 SATA SGPIO Pin Header (J30) 42 SAS SMB Pin Header (J33)

Jumpers Slots

a Clear CMOS Jumper (J3) A CPU1 DIMM Slots (Channel A/B)

b ME Recovery Mode Jumper (J69) B CPU1 DIMM Slots (Channel C/D)

c BIOS Recovery Jumper (J2) C CPU0 DIMM Slots (Channel A/B)

d SPI Write Protect Header (J38) D CPU0 DIMM Slots (Channel C/D)

e LSI 2308 Enable/Disable Jumper (J75) E PCIE Slots (x 8)

f BMC Debug Header (J35/J37)

Jumper Legend

OPEN - Jumper OFF

Without jumper cover

CLOSED - Jumper ON

With jumper cover

http://www.tyan.com

17

J19

J45

J66

J65

J20

J64

J26

J30

J39

J63

http://www.tyan.com

18

J19/J20/J45/J63/J64/J65/J66: 4-Pin FAN Connector

Pin 1 2 3 4

Signal GND +12V Sensor Control

Use this header to connect the cooling fan to your motherboard to keep

the system stable and reliable.

J63: CPU0_FAN J45: CPU1_FAN J66: SYS_FAN_1

J65: SYS_FAN_2 J64: SYS_FAN_3 J19: SYS_FAN_5

J20: SYS_FAN_4

J26: USB Front Panel Header (blue)

Signal Pin Pin Signal

VCC 1 2 VCC

USBD- 3 4 USBD-

USBD+ 5 6 USBD+

GND 7 8 GND

KEY 9 10 NC

J30: SATA SGPIO Header for BB HD Board

Signal Pin Pin Signal

SMBCLK 1 2 SDATAOUT0

SMBDATA 3 4 SDATAOUT1

GND 5 6 SLOAD

KEY 7 8 SCLOCK

VCC3_AUX 9 10 HDD_FAULT

J39: Front Panel Header

Signal Pin Pin Signal

PWRLED+ 1 2 V3P3_AUX

KEY 3 4 IDLED+

PWRLED- 5 6 IDLED-

HDDLED+ 7 8 SYS_FAULT1-

HDDLED- 9 10 SYS_FAULT2-

PWR_SW# 11 12 LAN1LED+

GND 13 14 LAN1LED-

RESET_SW# 15 16 SMBDATA

GND 17 18 SMBCLK

IDLED_SW# 19 20 INTRUSION#

NC 21 22 LAN2LED+

NMI_SW# 23 24 LAN2LED-

http://www.tyan.com

19

J23

J29

J34

J25

J24

J14

http://www.tyan.com

20

J29: IPMB Connector

Signal Pin Pin Signal

BMC_SMB_DATA 1 2 GND

BMC_SMB_CLK 3 4 NC

J34: PSMI Connector

Pin 1 2 3 4 5

Signal SMB_CLK SMB_DAT SMB_ALERT# GND V3P3

J24: Vertical Type-A USB Connector

Pin 1 2 3 4

Signal VCC USBD- USBD+ GND

J23/J25: LAN1/LAN2 LED Header

Pin 1 2

Signal LAN1LED+ LAN1LED-

J14: Front Fan Connector (Reserved for Barebone Fan Board)

Signal Pin Pin Signal

FAN TACH1 1 2 FAN TACH6

FAN TACH2 3 4 FAN TACH7

FAN TACH3 5 6 FAN TACH8

FAN TACH4 7 8 FAN TACH9

FAN TACH5 9 10 FAN TACH10

GND 11 12 KEY

FAN PWM2 13 14 FAN PWM1

FAN TACH11 15 16 SMBDATA

FAN TACH12 17 18 SMBCLK

V3P3_AUX 19 20 FAN PWM3

Page is loading ...

Tyan S7063 User manual

This manual is also suitable for

Tyan S7063 User manual

Related papers

Other documents