BLANCO 441500 Installation guide

Category
Faucets
Type
Installation guide

BLANCO 441500 is a kitchen faucet with a pull-out spray, featuring a solid brass body and a ceramic disk cartridge for durability and smooth operation. It has a 1.8 GPM flow rate, making it water-efficient, and can be installed in a 1-3/8” hole with a maximum deck thickness of 2-1/4”. The faucet has a 120-degree spout swivel, allowing for a wide range of motion, and a reach of 8-1/2”. The pull-out spray provides added convenience for tasks like rinsing dishes or cleaning the sink.

BLANCO 441500 is a kitchen faucet with a pull-out spray, featuring a solid brass body and a ceramic disk cartridge for durability and smooth operation. It has a 1.8 GPM flow rate, making it water-efficient, and can be installed in a 1-3/8” hole with a maximum deck thickness of 2-1/4”. The faucet has a 120-degree spout swivel, allowing for a wide range of motion, and a reach of 8-1/2”. The pull-out spray provides added convenience for tasks like rinsing dishes or cleaning the sink.

SPEC-004
B L A N C O A M E R I C A
8 0 0 . 4 51. 5 78 2
w w w. b l a n c o a mer i c a . c o m
J O B I N F O R M ATION
Job Name:
Contact:
Contractor:
FAUCET SPECIFICATIONS
BLANCO GRACE IITM with Pull-Out Spray
Model 441500
© 2013 BLANCO AMERICA
11/14
FEATURED MODEL
441500 Pull-Out Spray, CHROME
ADDITIONAL MODELS
441501 Pull-Out Spray, SATIN NICKEL
FEATURES
• Solid brass body
• Dual pull-down spray
• Ceramic disk cartridge
1.8 GPM flow rate
• Installation in a 1-3/8” hole
• 120 degree spout swivel
• 2-1/4” maxiumum deck thickness
WARRANTY
BLANCO’S kitchen and bar faucets feature a LIMITED LIFETIME
WARRANTY to be free of all manufacturing defects under normal use.
See our complete warranty for details.
While BLANCO endeavors to provide accurate information, all dimen-
sions are nominal, cannot be guaranteed, and are subject to change or
cancellation. BLANCO assumes no responsibility for use of superseded
or voided specications.
REACH SPOUT HEIGHT
Model 441500 shown
FAUCET HEIGHT
8-1/2” 5-7/8” 9”
OPTIONAL ACCESSORIES
Deluxe Soap Dispenser: 440006 (Chrome)
Meridian Soap Dispenser: 440059 (Chrome)
Alta Soap Dispenser: 440046 (Chrome)
Milano Soap Dispenser: 440050 (Chrome)
Harvest Soap Dispenser: 440054 (Chrome)
CODE/STANDARDS COMPLIANCE
ASME A112.18.1-2011
IAPMO listed
5-7/8”
6-7/8”
8-1/2”
2-1/4” Max
1-3/8”
16-3/8”
9”
Listed with California Energy Commission
CMR 248 - MA
FAUCET SPECIFICATIONS
BLANCO GRACE IITM with Pull-Out Spray
Model 441500
B L A N C O A M E R I C A
8 0 0 . 4 51. 5 78 2
w w w. b l a n c o a mer i c a . c o m SPEC-004
© 2013 BLANCO AMERICA
11/14
7
10
Num. Description Part #
Handle, screw and cap - Chrome
Handle - Screw and Cap
Cartridge - Cap
Cartridge Lock Nut
Cartridge
Harness, supply hose, supply lines
O-ring
Mounting nut assembly
Weight
1
1.1
2
3
4
5
6
440768
11 Spout insert
12 Handspray - Chrome
12.1 Flow regulator 1.8 GPM
12.2 Aerator kit
8Check valve assembly 1.8 GPM
REPAIR PART GUIDE
5
4
1.1
3
2
1
5
6
7
5
8
10
11
12
12.2
12.1
440758
440769
440766
Need to Change a Faucet Cartridge?
Scan this QR code
to see our how-to video
For faucet technical support or questions,
please e-mail us at fauc[email protected]
9.2
9.1
9
9Hose kit
9.1 Bottom red washer
9.2 Top rubber washer
441823
441808
441809
441824
441825
441830
441830
441826
441828
441803
441816
440759
440980
  • Page 1 1
  • Page 2 2

BLANCO 441500 Installation guide

Category
Faucets
Type
Installation guide

BLANCO 441500 is a kitchen faucet with a pull-out spray, featuring a solid brass body and a ceramic disk cartridge for durability and smooth operation. It has a 1.8 GPM flow rate, making it water-efficient, and can be installed in a 1-3/8” hole with a maximum deck thickness of 2-1/4”. The faucet has a 120-degree spout swivel, allowing for a wide range of motion, and a reach of 8-1/2”. The pull-out spray provides added convenience for tasks like rinsing dishes or cleaning the sink.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI