BALNCO 441493 Installation guide

Category
Faucets
Type
Installation guide

BALNCO 441493 is a kitchen faucet with a solid brass body and ceramic disk cartridge. It features an extendable dual pull-out spray and a 1.8 GPM flow rate that saves 20% more water. The faucet can be installed in a 1-3/8” hole and has a 130-degree spout swivel. It is also NSF 61 certified and meets CALGREEN requirements for water-saving usage. With its stylish design and durable construction, the BALNCO 441493 is a great choice for any kitchen.

BALNCO 441493 is a kitchen faucet with a solid brass body and ceramic disk cartridge. It features an extendable dual pull-out spray and a 1.8 GPM flow rate that saves 20% more water. The faucet can be installed in a 1-3/8” hole and has a 130-degree spout swivel. It is also NSF 61 certified and meets CALGREEN requirements for water-saving usage. With its stylish design and durable construction, the BALNCO 441493 is a great choice for any kitchen.

SPEC-004
B L A N CO A M ER I C A
8 0 0 . 451. 5 7 82
w w w. b l a n c o a mer i c a . c o m
J O B I N F O R M ATION
Job Name:
Contact:
Contractor:
Model 441493
BLANCO ALTA
TM
Compact Pull-Out with Dual Spray 1.8
© 2013 BLANCO AMERICA
11/14
FEATURED MODEL
441493 Compact Pull-Out Dual 1.8, CHROME
ADDITIONAL MODELS
441492 Compact Pull-Out Dual 1.8, SATIN NICKEL
FEATURES
• Solid brass body
• Meets CALGREEN requirements for water-saving usage
• Ceramic disk cartridge
• Extendable dual pull-out spray
• 1.8 GPM ow rate saves 20% more water
• Installation in a 1-3/8” hole
• Color coded hot and cold supply lines
• 130 degree spout swivel
• 1-3/4” maximum deck thickness
WARRANTY
BLANCO’S kitchen and bar faucets feature a LIMITED LIFETIME
WARRANTY to be free of all manufacturing defects under normal use.
See our complete warranty for details.
While BLANCO endeavors to provide accurate information, all dimen-
sions are nominal, cannot be guaranteed, and are subject to change or
cancellation. BLANCO assumes no responsibility for use of superseded
or voided specications.
Model 441493 shown
FAUCET SPECIFICATIONS
REACH SPOUT HEIGHT FAUCET HEIGHT
8” 6” 8-1/2”
OPTIONAL ACCESSORIES
Alta Soap Dispenser: 440046 (Chrome)
CODE/STANDARDS COMPLIANCE
ASME A112.18.1-2011
NSF 61 certied
NSF 61 ANEX G low lead requirements
8”
M A X
1
6
4-1/8”
1-1/4”
9/16" UN E F
3-3/8”
1-3/4”
2-1/8”
1/8”
1-1/8”
6
2/1-7
8/3-8
8/5-7
1-3/4”
4/1-02
Listed with California Energy Commission
CMR 248 - MA
Model 441493
BLANCO ALTA
TM
Compact Pull-Out with Dual Spray 1.8
FAUCET SPECIFICATIONS
B L A N CO A M ER I C A
8 0 0 . 451. 5 7 82
w w w. b l a n c o a mer i c a . c o m
SPEC-004
© 2013 BLANCO AMERICA
11/14
Faucet hole Φ1-3/8"
10.1
10
8
7
6
4
5
4
3
2
1.1
1
9
Need to Change a Faucet Cartridge?
Scan this QR code
to see our how-to video
For faucet technical support or questions,
please e-mail us at fauc[email protected]
440877
8
9
10
10.1
Num.
Description
Part #
Handle - Chrome
Handle - Screw and Cap
Cartridge lock nut
Cartridge
Inner body ring set and screw
Mounting assembly
Spray hose
Check valve
Weight
Handspray - Chrome 1.8 GPM
Aerator
1, 1.1
1.1
2
3
4, 5
6
7
440878
REPAIR PART GUIDE
440889
441887
441889
441891
441917
441892
441874
440905
10.2
Flow Regulator 1.8 GPM
10.2
441445
441931
  • Page 1 1
  • Page 2 2

BALNCO 441493 Installation guide

Category
Faucets
Type
Installation guide

BALNCO 441493 is a kitchen faucet with a solid brass body and ceramic disk cartridge. It features an extendable dual pull-out spray and a 1.8 GPM flow rate that saves 20% more water. The faucet can be installed in a 1-3/8” hole and has a 130-degree spout swivel. It is also NSF 61 certified and meets CALGREEN requirements for water-saving usage. With its stylish design and durable construction, the BALNCO 441493 is a great choice for any kitchen.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI