BLANCO 441409 Installation guide

  • Hello! I am an AI chatbot trained to assist you with the BLANCO 441409 Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What is the maximum deck thickness for the BLANCO 441409 faucet?
    What is the installation hole size requirement?
    What is the flow rate of the faucet?
    What is the spout height of the faucet?
    What is the faucet's reach?
    What is the minimum backsplash clearance required?
    What optional accessories are available for the faucet?
    What is the warranty period for the BLANCO 441409 faucet?
SPEC-004
B L A N C O A M E R I C A
8 0 0 . 4 51. 5 78 2
w w w. b l a n c o a mer i c a . c o m
J O B I N F O R M ATION
Job Name:
Contact:
Contractor:
Model 441409
BLANCO MERIDIANTM Semi Professional 1.8
© 2013 BLANCO AMERICA
10/14
FEATURED MODEL
441409 Semi Professional, SATIN NICKEL
ADDITIONAL MODELS
441408 Semi Professional, CHROME
FEATURES
• Solid brass body and pull-down handspray
• Meets CALGREEN requirements for water-saving usage
• Ceramic disk cartridge
• Extra long supply lines
• 1.8 GPM ow rate saves 20% more water
• Installation in a 1-3/8” hole
• Color coded hot and cold supply lines
• 5” to 6” pull down
• 360 degree spout swivel
• 3“ backsplash clearance off center
• 3-1/2” maximum deck thickness
WARRANTY
BLANCO’S kitchen and bar faucets feature a LIMITED LIFETIME
WARRANTY to be free of all manufacturing defects under normal use.
See our complete warranty for details.
While BLANCO endeavors to provide accurate information, all dimen-
sions are nominal, cannot be guaranteed, and are subject to change or
cancellation. BLANCO assumes no responsibility for use of superseded
or voided specications.
Model 441409 shown
FAUCET SPECIFICATIONS
REACH SPOUT HEIGHT FAUCET HEIGHT
8-3/8” 5-3/4” 19-1/4”
OPTIONAL ACCESSORIES
Meridian Soap Dispenser: 440058 (Satin Nickel)
CODE/STANDARDS COMPLIANCE
ASME A112.18.1-2011
NSF 61 certied
NSF 61 ANEX G low lead requirements
83
8
1 9 1
4
3/8" UN E F
53
4
2 0 7
8
MAX. 3-1/2”
Listed with California Energy Commission
CMR 248 - MA
Model 441409
BLANCO MERIDIANTM Semi Professional 1.8
FAUCET SPECIFICATIONS
B L A N C O A M E R I C A
8 0 0 . 4 51. 5 78 2
w w w. b l a n c o a mer i c a . c o m SPEC-004
© 2013 BLANCO AMERICA
10/14
7
8.1
Num. Description Part #
Handle - Satin Nickel
Handle - Screw and Cap
Cartridge Lock Nut
Cartridge
Round base - Satin Nickel
Holding screw
O-ring set
Mounting set
Docking station screw
1, 1.1
1.1
2
3
4
5
6
440877
9,9.1,9.2 Handspray - Satin Nickel 1.8
9.1 Flow regulator 1.8
9.2 Aerator
10 Pull-out hose
8, 8.1 Handspray dock station and screw
REPAIR PART GUIDE
Old Model #: 157-140-ST
11 Spring ring & screw - Satin Nickel
Need to Change a Faucet Cartridge?
Scan this QR code
to see our how-to video
For faucet technical support or questions,
please e-mail us at fauc[email protected]
440890
7
8
8.1
10
11
10
9.1
9
9.2
441745
441744
441751
441737
441862
441864
441866
441867
441748
441869
441445
12Flow regulator/check valve 441743

441860
441934
/