Adjustable frame for (Galaxy) NH/NW-12
Installation manual
R9843110
R59770452/00
19/08/2009
Barco nv Simulation Division
Noordlaan 5, B-8520 Kuurne
Phone: +32 56.36.82.11
Fax: +32 56.36.84.86
E-mail: [email protected]
Visit us at the web: www.barco.com
Printed in Belgium
1. Safety
1. SAFETY
1.1 Safety warnings
WARNING: This procedure is intended for use only by BARCO authorized technicians.
WARNING: Be sure that the projector is p owered d ow n and that the pow er cord is removed from the wall
outle t.
Wait until the projector is cooled down before starting the procedure.
R59770452 ADJUSTABLE FRAME FOR (GALAXY) NH/NW-12 19/08/2009 1
1. Safety
2 R59770452 ADJUSTABLE FRAME FOR (GALAXY) NH/NW-12 19/08/2009
2. Description of the adjustable frame for NH/NW-12
2. DESCRIPTION OF T HE ADJUSTABLE FRAME FOR
NH/NW-12
2.1 Purpose
Description
The adjustable frame is used to install a single projector of the NH/NW-12 range and to allow an easy adjustment of the projector.
The projector is fix ed at 3 positions using the projector feet positions.
The adjus table frame allows following projector position adjustments:
• forward/backward
• horizontal rotation angle
• height
P2
P3
P1
Image 2-1
The adjustable frame and its 3 fixation points
2.2 Related products
Overview
Product number Description
R9843100 CM100 adaptor plate
R9827341 CM100 with pulley
R59770452 ADJUSTABLE FRAME FOR (GALAXY) NH/NW-12 19/08/2009 3
2. Description of the adjustable frame for NH/NW-12
4 R59770452 ADJUSTABLE FRAME FOR (GALAXY) NH/NW-12 19/08/2009
3. Installation
3. INSTALLATION
Overview
• Mounting the projector on the frame
• Adjustments
• Dimensions
3.1 Mounting the projector on the frame
Necessary tools
• Slotted scre w d river
• Nut spanner or open ended spanner M4 + M6
How to prepare the projector?
1. Turn out the 3 projector feet.
Mount the following items on the feet positions of the Projector.
a) blocking plate
b) spacer
c) special nut
d) knurled nut
b
a
c
d
Image 3-1
2. Use the open ended spanners to firmly tighten the bolts.
3. Place the projector onto the frame and mount the rem aining knurled nuts and loc k nuts o n each special bolt.
R59770452 ADJUSTABLE FRAME FOR (GALAXY) NH/NW-12 19/08/2009
5
3. Installation
3.2 Adjustments
Height adjustment
The following table specifies the height adjustment on the adjustable frame:
Function: position vertically the pr ojector
Effect on image:
• two of the three points: rotation of the image
• rear point or 2 front points: (vertical) keystone correction
• 3 points: vertical shift
Range: 12,5 mm
Used par ts: 3 x positioning nut
3 x locking nut
indication 2 on image
indication 3 on image
Image 3-2
Height adjustment : Used parts (perspective view without projector)
1extrafixation plate (allows extra fixation using security cable etc.)
2 positioning nut
3plate
4 locking nut
6
R59770452 ADJUSTABLE FRAME FOR (GALAXY) NH/NW-12 19/08/2009
3. Installation
1
2
3
Image 3-3
Image 3-4
Height adjustme nt (left view with projector in stalled)
Translation adjustment
The following table specifies the translation a djustment on the adjustable frame:
Function: position horizontally the projector
Effect on im age: Zoom in/out
Range: 125 mm
Used parts: 1 x threaded rod indication 1 on image
R59770452 ADJUSTABLE FRAME FOR (GALAXY) NH/NW-12 19/08/2009 7
3. Installation
6 x locking nuts
indication 2 on image
1
2
Image 3-5
Adjustable frame: Translation adjustment
1 threaded rod
2 locking nut
Rotation
The following table specifies the rotation adjustment o n the stackable frame :
Function: allows to rotate projector around one center point
Effect on image: (horizontal) keystone correction
Range:
5°
indication A on image
Used parts:
locking nuts, one of them acting as rotation center
indication 1 on image
A
1
Image 3-6
Adjustable frame (bottom view): rotation adjustment
1 locking nut (acting also as rotation center)
A rotation angle
8
R59770452 ADJUSTABLE FRAME FOR (GALAXY) NH/NW-12 19/08/2009
3. Installation
3.3 Dimensions
Dimensions
The following image shows the dimensions (in m m) of the standalone adjustable frame and when used in a stacked configuration:
925
40
88
120,5
630
948,5
818,5
500
545
318,5
121,5
590,07
720
Image 3-7
R59770452 ADJUSTABLE FRAME FOR (GALAXY) NH/NW-12 19/08/2009 9
3. Installation
10 R59770452 ADJUSTABLE FRAME FOR (GALAXY) NH/NW-12 19/08/2009
A. Adaptor plate for the CM 100 (R9843100)
A. ADAPTOR PLATE FOR TH E CM 100 (R9843 100)
A.1 Description
Exploded view of the total assembly
The adjustable frame for NH/NW-12 can als o be used in combination with the ceiling m ount CM100. T his
is done by using an adaptor
plate.
The following image shows how the adaptor plate is used between the CM100 and the adjustable frame:
1
2
3
4
A
C
B
Image A-1
The following table show the components of the total assembly and the mounting c ompo nents:
Component Description
1 Upper part of the CM100
2 Lower part of the CM100
3 Adaptor plate for CM1 00
4 Adjustable frame
A Hexagon head screw M8 x 20
B Plain washer
C Hex agon spacer (M 8) with interior and exterior thread
R59770452 ADJUSTABLE FRAME FOR (GALAXY) NH/NW-12 19/08/2009 11
A. Adaptor plate for the CM 100 (R9843100)
For more information on the CM100, read the In stallation manual R5975693.
A.2 Dimensions
Dimensions: side and top view
Image A-2
Adjustable frame + CM100: dimensions
12 R59770452 ADJUSTABLE FRAME FOR (GALAXY) NH/NW-12 19/08/2009
A. Adaptor plate for the CM 100 (R9843100)
Dimensions: front view
Image A-3
Adjustable frame + CM100: dimensions
R59770452 ADJUSTABLE FRAME FOR (GALAXY) NH/NW-12 19/08/2009 13
A. Adaptor plate for the CM 100 (R9843100)
14 R59770452 ADJUSTABLE FRAME FOR (GALAXY) NH/NW-12 19/08/2009
Index
INDEX
A
Adaptor plate 11
description 11
Adaptor plate for the CM 100 11
Adjustments 6
D
Description 3, 11
adjustable f rame 3
dimensions 12
CM100 + adj frame 12
Dimensions 9
I
Installation 5–6
adjustments 6
M
Mounting 5
projector on fram e 5
P
Purpose 3
R
Related products 3
S
Safety 1
Safety warnings 1
R59770452 ADJUSTABLE FRAME FOR (GALAXY) NH/NW-12 19/08/2009
15
Index
16 R59770452 ADJUSTABLE FRAME FOR (GALAXY) NH/NW-12 19/08/2009
List of images
LIST OF IMAGES
2-1 The adjustable frame and its 3 fixation points........................................................................ 3
3-2 Height adjustment : U sed parts (perspective view without projector) . .............................................. 6
3-4 Height adjustment (left view with projector installed) ................................................................ 7
3-5 Adjustable frame: Translation adjustment............................................................................ 8
3-6 Adjustable frame (bottom view): rotation adjustment................................................................ 8
A-2 Adjustable f rame + CM100: dimensions . ........................................................................... 12
A-3 Adjustable f rame + CM100: dimensions . ........................................................................... 13
R59770452 ADJUSTABLE FRAME FOR (GALAXY) NH/NW-12 19/08/2009
17
/