3M Filtek™ P60 Posterior Restorative User guide
- Type
- User guide
DIRECT POSTERIOR RESTORATIONS
Vitrebond
™
LightCure GlassIonomer Liner/Base
Adper
™
Adhesive Systems
Filtek
™
P60 Posterior Restorative
Sof-Lex
™
Discs, Strips and Finishing Brush
3
4
1 of 2
1
2
Prepare tooth and isolate.
Apply liner/base if desired:
• Mix a level scoop of Vitrebond powder and
a drop of Vitrebond liquid on a mixing pad.
• Apply a thin layer of the liner/base to
dentin surfaces using a ball applicator.
• Light-cure for 30 seconds.
Adhesive Placement:
• Apply adhesive following directions for
3M
™
ESPE
™
Adper
™
adhesive of choice.
Place Restorative:
• Place Filtek P60 restorative in
increments less than 2.5mm.
• Light-cure each increment for
20 seconds.
Finish and Polish:
• Finish occlusal surface using a Sof-Lex
Finishing Brush.
• Finish proximal surfaces with Sof-Lex
Extra Thin Discs and Strips.
DIRECT POSTERIOR RESTORATIONS
2 of 2
3M ESPE Customer Hotline 1-800-634-2249 70-2009-3654-3
Please refer to instructions for more detailed information 44-0007-4177-5
as well as precautionary and warranty information. © 2004 3M
3M, ESPE, Adper, Vitrebond, Filtek and Sof-Lex are trademarks of 3M or 3M ESPE AG.
Used under license in Canada.
5
Vitrebond
™
LightCure GlassIonomer Liner/Base
Adper
™
Adhesive Systems
Filtek
™
P60 Posterior Restorative
Sof-Lex
™
Discs, Strips and Finishing Brush
Check occlusion:
• Check lateral and centric occlusion.
• Adjust if necessary.
-
1
-
2
3M Filtek™ P60 Posterior Restorative User guide
- Type
- User guide
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
3M Filtek™ Z250 Universal Restorative User guide
-
-
-
-
-
-
-
-
-
