Midmark LED Dental Light Installation guide

Brand: Midmark

Model: LED Dental Light

Type: Installation guide

Midmark LED Dental Light provides bright, natural illumination for your dental procedures. Its advanced LED technology ensures consistent light intensity and color temperature, minimizing eye strain and enhancing visualization. The light's compact design and adjustable arm offer precise positioning, allowing you to focus the light exactly where you need it.

Applies to Models:

153831

Special Tools:

none

Note

Use this kit to upgrade an existing 17" Track Light Monitor unit with a 24” monitor.

24" Monitor Conversion Kit Install Guide

TP201 20-42-FO-00013 Rev A1 C2169

003-10138-00 Rev. AA1 (12/17)

Step 1: Remove Existing Monitor.

A) Remove monitor back cover (2 or 3 screws depending on the back cover style).

B) Unplug all of the A/V connectors from the monitor.

C) Rotate monitor 90° forward to access the swivel cover.

D) Remove the swivel cover (2 screws).

E) Remove the whole monitor mount arm, with monitor attached. (2 screws with lock washers).

WARNING

Always disconnect power before removing covers.

Failure to do so may result in personal injury.

Swivel Cover

Monitor Mount

Arm

Back Cover

midmark.com

Style G

Color Page

003-10138-00

TP201 20-42-FO-00013 Rev A1 C2169

Step 2: Install 24" Monitor and Monitor Mount Arm.

A) Mount the back cover bracket onto the monitor.

B) Mount the monitor mount arm onto the flex arm. (Use 2 washers and screws.)

C) Install monitor onto monitor mount arm. (Use 4 washers and the 4 metric screws included in the kit.)

D) Plug all of the A/V connections from the flex arm into the monitor.

E) Mount the back cover on the monitor over the A/V cables and connections. (Use 3 screws.)

F) Install Swivel Cover. (Use 2 screws.)

Back Cover

Bracket

Swivel Cover

Monitor Mount

Arm

Monitor

midmark.com

Style G

English-3

003-10138-00

TP201 20-42-FO-00013 Rev A1 C2169

Step 3: Install 19 VDC Power Supply for the 24" Monitor.

A) Remove the video power cover at the foot end of the track (4 screws).

B) Remove the power supply cover and discard (2 washers and screws).

C) Unplug connections and remove the 12 VDC power supply. Discard.

D) Install the 19 VDC power supply and plug power connections into it.

E) Install the adapter harness to connect to the monitor power harness.

F) Start screws into the power supply cover and mount together with the power supply.

G) Insert cable tie push mount into the new power supply cover, then install over the power supply (2 screws).

Gather excess power harness, wrap with a cable tie and attach to push mount in.

H) Install the video power cover back onto the track. Reference step A).

I) Connect mains power to the track light monitor and verify operation of the 24" monitor.

19 VDC

Power

Supply

12 VDC

Power

Supply

Adapter

Harness

midmark.com

Style G

English-4

003-10138-00

TP201 20-42-FO-00013 Rev A1 C2169

24" Monitor Conversion Kit

(includes items 2 thru 5)

Item Description Qty.

1 • 24" Monitor Conversion Kit 1

2 • Power Supply Retrot Kit for 24” Monitor 1

• 24” Sealed Dental Grade Monitor Kit

(Manufactured by Exorvision)

4 • Monitor Back Cover Kit 1

5 • 24" Monitor Mount Kit 1

5 002-2097-00

Serial Numbers / Dates:

all

2 002-10236-xx

3 002-2095-00

4 002-10087-00

Cover

Cable Tie

Push Mount

Power

Supply

Cable

Ties

Adapter

Harness

1 002-10232-00

midmark.com

Style G

Midmark LED Dental Light Installation guide

Midmark LED Dental Light Installation guide

Midmark LED Dental Light Installation guide

Related papers