Niigata seiki D-300W User manual

Type
User manual

Niigata seiki D-300W is a digital caliper, a precision instrument for measuring lengths, with a resolution of 0.01mm and an instrument error of ±0.04mm. It has both absolute and relative measurement capabilities, allowing you to measure from a fixed reference point or from any position. The caliper has a maximum response speed of 1.5m/s when moving the slide to the right. It is powered by a Silver Oxide Battery, SR44, 1.55V, which has a battery life of approximately 1 year with normal usage. The caliper comes with a battery for testing purposes.

Niigata seiki D-300W is a digital caliper, a precision instrument for measuring lengths, with a resolution of 0.01mm and an instrument error of ±0.04mm. It has both absolute and relative measurement capabilities, allowing you to measure from a fixed reference point or from any position. The caliper has a maximum response speed of 1.5m/s when moving the slide to the right. It is powered by a Silver Oxide Battery, SR44, 1.55V, which has a battery life of approximately 1 year with normal usage. The caliper comes with a battery for testing purposes.

1. Measuring Surfaces
for Outside
Measurements1
2. Measuring Surfaces
for Step
Measurements
3. Measuring Surfaces
for Inside
Measurements1
4. Lock Screw
5. LCD Display
6. Scale
7. Depth Bar
8. Scale
9. Battery Cover
10. [ZERO] Button
11. [ON / OFF] Button
12. [Hold] Button
13. Output Connector2
14. Thumb Wheel
1 D-150W, D-200W, D-300W
models have a carbide
measuring surface for inside,
and outside measurements.
2 Output connector function
not available for this model.
Before use, please wipe off corrosion protectant using a soft, oiled cloth.
This is a precision instrument, handle with care. Do not drop or subject to excessive force.
Do not damage scale or scratch instrument. Do not apply ID numbers with engraver.
Keep away from direct sunlight. Do not store instrument in extreme temperatures.
Thank you for purchasing Digital Calipers.
Before use, please read this document thoroughly for proper operation.
PARTS IDENTIFICATION
OPERATION
Q. Nothing is displayed, or the numbers are flashing.
A. Is the battery running low?
Q. With power on, the number on the LCD does not change as main
slide is moved.
A. Please reset by removing battery for about 30sec., and then
replacing.
Q. Nothing happens when buttons are pressed.
A. Is the battery inserted properly?
Q. The characters “MIN”, “MAX”, or “” are displayed on LCD.
A. Cycle power, or apply several long presses to [HOLD] button.
Use as normal once character is off.
Niigata seiki Co., Ltd.
6-15-22, Tsukanome, Sanjo, Niigata, Japan, 955-0055
Tel. : +81-256-31-5660 Fax. : +81-256-39-7730
URL
http://www.niigataseiki.co.jp
Resolution : 0.01mm
Instrument Error
:
DT-100/DT-150/DT-200/D-150W/D-200W ±0.03mm
DT-300/D-300W ………………………………±0.04mm
Display : 5-Digit LCD
Maximum Response Speed : Moving Slide to Right:1.5m/s
Moving Slide to Left : 0.75 m/s
 
“Right” and “Left” when viewed as shown in Parts Identification
drawing.
Operating Temperature Range : 040
Storage Temperature Range : -1060
Power : Silver Oxide Battery, SR44, 1.55V
Battery Life : Approx. 1 year with normal usage
Accessories : Silver Oxide Battery, SR44, 1.55V, (for testing.)
I228-K 1502
1. Slide cover in direction of arrow.
2. Insert battery with () side outward.
3. Replace battery cover.
Absolute Measurement
1. Turn on power.
2. Press [ZERO] button with caliper jaws fully closed.
3. When display reads “0.00mm”, caliper is ready for use.
Relative Measurement
1. Turn on power.
2. Open the caliper jaws to desired reference value and press
[ZERO] button (OK at any position).
3. When display reads “0.00mm”, caliper is ready for use.
Battery Cover
BATTERY REPLACEMENT
Only use SR44 type battery.
TROUBLESHOOTING
OPERATION
SPECIFICATIONS
Open
2 4 125 13 6
1
3
11 10 9 14 8 7
Use care to prevent the thumb wheel from coming loose when
jaws are fully opened.
Notice
Notice
Model No. : DT-*** / D-***W<combined>
INSTRUCTION MANUAL
DIGITAL CALIPERS
  • Page 1 1

Niigata seiki D-300W User manual

Type
User manual

Niigata seiki D-300W is a digital caliper, a precision instrument for measuring lengths, with a resolution of 0.01mm and an instrument error of ±0.04mm. It has both absolute and relative measurement capabilities, allowing you to measure from a fixed reference point or from any position. The caliper has a maximum response speed of 1.5m/s when moving the slide to the right. It is powered by a Silver Oxide Battery, SR44, 1.55V, which has a battery life of approximately 1 year with normal usage. The caliper comes with a battery for testing purposes.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI