Surewerx JET JEDC-6 Operating instructions

Brand
Surewerx
Model
JET JEDC-6
Type
Operating instructions

Surewerx JET JEDC-6 is an electronic digital caliper with a resolution of 0.0005" / 0.01 mm and a range of 0 - 6" / 150 mm. It has several useful features, including:

  • Zero setting at any position - allows quick and easy relative measurements.
  • Inch/metric selector - instantly make conversions.
  • Hold - freezes display when button is pressed. Useful for holding measurement when display cannot be seen. When active displays H.

The Surewerx JET JEDC-6 is a versatile tool that can be used for a variety of measuring tasks, including:

  • Measuring the outside diameter of objects
  • Measuring the inside diameter of objects

Surewerx JET JEDC-6 is an electronic digital caliper with a resolution of 0.0005" / 0.01 mm and a range of 0 - 6" / 150 mm. It has several useful features, including:

  • Zero setting at any position - allows quick and easy relative measurements.
  • Inch/metric selector - instantly make conversions.
  • Hold - freezes display when button is pressed. Useful for holding measurement when display cannot be seen. When active displays H.

The Surewerx JET JEDC-6 is a versatile tool that can be used for a variety of measuring tasks, including:

  • Measuring the outside diameter of objects
  • Measuring the inside diameter of objects
Thank you for purchasing a quality JET electronic
digital caliper. Used and cared for correctly, it will
give you many years of trouble-free service.
Specifications
• Resolution: 0.0005" / 0.01 mm
• Range: 0 - 6" / 150 mm (310131)
0 - 8" / 200 mm (310132)
0 - 6" / 150 mm fractional/metric (310133)
0 - 12" / 300 mm (310136)
• Power: One 1.5V button cell (SR44, G13A,
or equivalent)
• Measuring speed: < 1.5 m/s
Components
Functions
1. Zero setting at any position – allows quick and
easy relative measurements.
2. Inch/metric selector – instantly make
conversions.
3. Hold - freezes display when button is pressed.
Useful for holding measurement when display
cannot be seen. When active displays H.
4. Caliper will shut off automatically after a few
minutes.
in
inch/mm HOLD ZERO
2
5
1112
9
6
7
8
1
43
10
1. Step measuring face
2. Internal measuring faces
3. LCD display screen
4. Locking screw
5. Battery cover
6. Slider
7. Scale face
8. Depth measuring blade
9. External measuring faces
10. Inch/mm selector
11. Zero setting
Una Marca
surewerx.com
Electronic Digital Calipers
Prod. No. 310131 • Mod. No. JEDC-6
Prod. No. 310132 • Mod. No. JEDC-8
Prod. No. 310133 • Mod. No. JEDC-6F
Prod. No. 310136 • Mod. No. JEDC-12
M18-HT310131-6
Operation MANUAL
Operation
1. Clean all measuring surfaces and scale face.
2. Loosen locking screw and move slider to check that LCD and all function buttons are operating.
3. Select desired units of measure (in/mm).
4. Close slider until outside measuring faces make contact, then press zero button.
5. Measure according to diagrams above.
Specific instructions for product number 310133
• Product 310133 features 3 measuring modes – fractional inches (1/128"), decimal inches to 4 places,
and metric measurements to .01mm.
• This model does not have HOLD function.
• This model does NOT have Auto-off function. Turn off calipers with ON/OFF switch to avoid battery drain.
• Working temperature: 0 – +40°C
• Storage temperature: -10 – +70°C
Maintenance
Keep your caliper clean. Use a non-corrosive, non-abrasive cleaner. A light film of machine oil on the sliding
parts will ensure smooth functioning.
Never apply voltage or use an electric engraver on the caliper. The electronics may be damaged and will
not be covered under warranty.
Abnormal display such as flashing digits, no digits etc., indicates a weak or spent battery. To replace
battery, simply slide battery cover in direction of arrow and replace. Use model SR44 or equivalent.
Positive side of battery must face up.
Please note your caliper was shipped with 2 batteries. We recognize the batteries in the unit may not be
fresh by the time it reaches the consumer. If the batteries in your unit are spent, replace them with the
spares. A spent battery is not a warranty item.
Troubleshooting
Trouble Possible Causes Solutions
Flashing digits Low voltage Replace battery
No display 1. Low voltage
2. Poor contact
1. Replace battery
2. Clean and adjust battery seat
  • Page 1 1
  • Page 2 2

Surewerx JET JEDC-6 Operating instructions

Brand
Surewerx
Model
JET JEDC-6
Type
Operating instructions

Surewerx JET JEDC-6 is an electronic digital caliper with a resolution of 0.0005" / 0.01 mm and a range of 0 - 6" / 150 mm. It has several useful features, including:

  • Zero setting at any position - allows quick and easy relative measurements.
  • Inch/metric selector - instantly make conversions.
  • Hold - freezes display when button is pressed. Useful for holding measurement when display cannot be seen. When active displays H.

The Surewerx JET JEDC-6 is a versatile tool that can be used for a variety of measuring tasks, including:

  • Measuring the outside diameter of objects
  • Measuring the inside diameter of objects
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents