Jetson Bolt Pro Electric Bike Owner's manual

Category
Bicycles
Type
Owner's manual

Jetson Bolt Pro Electric Bike boasts an impressive range of features to enhance your riding experience. With pedal assist and all-electric modes, you can choose the level of assistance you need. The bike's sturdy frame and powerful motor can handle inclines and rough terrain with ease. Equipped with a bright headlight and rear light, you can ride safely even in low-light conditions. Plus, the easy-to-read display lets you monitor your speed, battery level, and distance traveled.

Jetson Bolt Pro Electric Bike boasts an impressive range of features to enhance your riding experience. With pedal assist and all-electric modes, you can choose the level of assistance you need. The bike's sturdy frame and powerful motor can handle inclines and rough terrain with ease. Equipped with a bright headlight and rear light, you can ride safely even in low-light conditions. Plus, the easy-to-read display lets you monitor your speed, battery level, and distance traveled.

Bolt Pro
Electric Bike.
A guide for your ride.
IMPORTANT: READ CAREFULLY AND RETAIN FOR FUTURE REFERENCE.
MODELS: JBLTP-SBL | JBLTP-FGR | JBLTP-CA-BLK | JBLTP-BLK
JBLTP-BLK-OB | JBLTP-BLK-RA | JBLTP-BLK-RB | JBLTP-MX-BLK
Designed in Brooklyn
Jetson's top two riding rules:
Be safe. Have fun!
2
Contents
........................................................................................................................................................
...................................................................................................................................................
...................................................................................................................................................
.....................................................................................................................................................
.......................................................................................................................................................
.....................................................................................................................................................
.....................................................................................................................
................................................................................................................................................
....................................................................................................................................
.............................................................................................................................................
......................................................................................................................................
...................................................................................................................................................
................................................................................................................................
.......................................................................................................................................
.........................................................................................................................................
............................................................................................................................................
Safety Warnings
Warranty Coverage
Product Overview
Specs & Features
Rider Suitability
Online Resources
1. Getting Started
Unfolding & Folding the Handlebar
Attaching the Seat
Attaching the Rear Fender
Attaching the Pedals
Attaching the Rear Light
Securing the Bell
Securing the Front Relector
2. Preparing to Ride
Adjusting the Handlebar
Repositioning the Seat
Charging the Battery
3
Tire Pressure & Inlation
Checking & Adjusting the Brakes
3. Functions & Features
Powering On & O
Checking Battery Charge Level
Using the Headlight
Using the Rear Light
Using the Bell
Using the Kickstand
4. Making Moves
Using Pedal Assist
All Motor Power
Using Cruise Control
Traditional Biking
Using the Brakes
Maximizing Speed & Riding Range
5. Safe Journeying
Pre-Ride Safety Checks
Proper Helmet Positioning
Care & Maintenance
.......................................................................................................................................
.....................................................................................................................
................................................................................................................................................
...........................................................................................................................
.............................................................................................................................................
............................................................................................................................................
.......................................................................................................................................................
.............................................................................................................................................
................................................................................................................................................
....................................................................................................................................................
...........................................................................................................................................
.................................................................................................................................................
..................................................................................................................................................
......................................................................................................................
........................................................................................................................................
...................................................................................................................................
................................................................................................................................................
4
• Before use, please read the user manual and safety warnings carefully, and make sure you understand and accept all the safety
instructions. The user will be responsible for any loss or damage caused by improper use.
• Please check the drive system and frame before riding to ensure safety.
• Before each cycle of operation, the operator shall perform the preoperation checks speciied by the manufacturer:
That all guards and pads originally supplied by the manufacturer are in proper place and in serviceable condition;
That the braking system is functioning properly; That any and all bike guards, chain guards, or other covers or guards supplied
by the manufacturer are in place and in serviceable condition; That tires are in good condition, inlated properly, and have
suicient tread remaining; The area that the product is to be operated should be safe and suitable for safe operation.
• Components shall be maintained and repaired in accordance with the manufacturer’s speciications and using only the
manufacturer’s authorized replacement parts with installation performed by dealers or other skilled persons.
• Don’t allow hands, feet, hair, body parts, clothing, or similar articles to come in contact with moving parts, wheels, or drive
train, while the bike is in use.
• This product should not be used by children or persons with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision or instruction (IEC 60335-1/A2:2006).
• Unsupervised children should not play with the product (IEC 60335-1/A2:2006).
• Adult supervision is required.
• The rider should not exceed 265 lb.
• Never use near motor vehicle.
• Units shall not be operated to perform racing, stunt riding, or other maneuvers, which may cause loss of control, or may cause
uncontrolled operator/passenger actions or reactions.
• Avoid sharp bumps, drainage grates, and sudden surface changes. Bike may suddenly stop.
Avoid streets and surfaces with water, sand, gravel, dirt, leaves, and other debris. Wet weather impairs traction, braking, and visibility.
• Avoid riding around lammable gas, steam, liquid, or dust that could cause ire.
• Operators shall adhere to all of the manufacturer’s recommendations and instructions, as well as comply with all laws and
ordinances: Units without headlights shall be operated only with adequate daylight conditions of visibility, and; Owners shall
be encouraged to highlight (for conspicuity) using lighting, relectors, and for low-riding units, signal lags on lexible poles.
• Do not ride at night.
• Only ride the product with adequate daylight conditions for visibility.
• Persons with the following conditions shall be cautioned not to operate: Those with heart conditions; Pregnant women;
Persons with head, back, or neck ailments, or prior surgeries to those areas of the body; and persons with any mental or
physical conditions that may make them susceptible to injury or impair their physical dexterity or mental capabilities to
recognize, understand, and perform all of the safety instructions and to be able to assume the hazards inherent in unit use.
• Do not ride after drinking or taking prescription medication.
• Do not carry items when riding.
Safety Warnings
5
• Never operate the product while barefoot.
• Always wear shoes and keep shoelaces tied.
• Make sure your feet are always placed securely on the deck/pedal.
• Operators shall always use appropriate protective equipment, including but not limited to: a helmet with appropriate
certiication, protective clothing, knee pads, and elbow pads.
• Always give way to pedestrians.
• Be alert to things in front and far away from you.
• Do not allow distractions when riding, such as answering the phone or engaging in any other activities.
• The product cannot be ridden by more than one person.
• When riding the product along with other riders, always keep a safe distance to avoid a collision.
• When turning, be sure to maintain your balance.
• Riding with improperly adjusted brakes is dangerous and can result in serious injury or death.
• Applying brakes too hard or too suddenly can lock up a wheel, which could cause you to lose control and fall. Sudden or
excessive application of the brake may result in injury or death.
• If the brake loosens, please adjust with a hexagon wrench, or please contact the Jetson Care Team.
• Replace worn or broken parts immediately.
• The area that the product is to be operated should be safe and suitable for safe operation.
• Check whether all safety labels are in place and understood before riding.
• The owner shall allow the use and operation of the unit after a demonstration that such operators can understand and operate
all components of the unit before use.
• Recommended to charge indoors.
• Use caution when changing the batteries. Do not change batteries near lammable materials. Remove batteries from the bike
when not in use for long periods of time.
• Prolonged exposure to UV rays, rain, and the elements may damage the enclosure materials. Store indoors when not in use.
MODIFICATIONS
Do not attempt to disassemble, modify, repair, or replace the product or any components of the unit without instruction from
the Jetson Care Team. This will void any warranty, and can lead to malfunctions which may cause injury.
ADDITIONAL OPERATION PRECAUTIONS
• Do not lift the product o the ground while it is on and the wheels are in motion. This can result in freely spinning wheels,
which may cause injury to yourself or others nearby.
• Do not jump on or o the product, and do not jump while using it.
• Always keep your feet irmly planted on the pedals while in operation.
• The Consumer Product Safety Commission advises that the riding of small wheel diameter bicycles at excessive speeds can
lead to instability and is not recommended.
• Always wear a properly itted helmet when you ride your bicycle. Do not ride at night. Avoid riding in wet conditions.
6
MAINTENANCE PRECAUTIONS
For all maintenance repairs and needs beyond the capability of the consumer, which may include but not be limited to: such
as proper maintenance of brakes, control cables, bearing adjustments, wheel adjustments, lubrication, relectors, tires and
handlebar and seat adjustments, please contact the Jetson Care Team for assistance at:
ridejetson.com/chat
ridejetson.com/support
US & Canada 1-(888) 976-9904
DISPOSAL OF USED BATTERY
Battery may contain hazardous substances which could endanger the environment and human health. This symbol
marked on the battery and/or packaging indicates that used battery shall not be treated as municipal waste.
Batteries should be disposed of at an appropriate collection point for recycling. By ensuring the used batteries are
disposed of correctly, you will help prevent potential negative consequences for the environment and human health. The
recycling of materials will help to conserve natural resources. For more information about recycling of used batteries,
please contact your local municipality waste disposal service.
NOTICE OF COMPLIANCE
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
WARNING: Changes or modiications to this unit not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Shielded cables must be used with this unit to ensure compliance with the Class B FCC limits.
CALIFORNIA PROPOSITION 65
WARNING:
This product can expose you to chemicals including Cadmium, which is known to the State of California to cause
cancer and birth defects or other reproductive harm. For more information go to:www.P65Warnings.ca.gov.
7
Warranty Coverage
ONE-YEAR GENERAL LIMITED WARRANTY
All new Jetson products are warranted against defects in materials and workmanship for a period of one year from the
date of original retail purchase when used in accordance with Jetson's user manuals (refer to ridejetson.com/support).
Under this warranty, you will be able to direct your claims to Jetson even in situations where you purchased the
Jetson Product from one of our authorized retailers.
To read the full terms of our warranty, visit ridejetson.com/warranty.
8
STEM
FORK
FRAME
CARRYING HANDLE
CHARGING PORT WITH COVER
SEAT*
SEAT POST*
SEAT POST CLAMP
REAR REFLECTOR
REAR LIGHT*
Product Overview
* NOT PREATTACHED; REQUIRES SETUP
WHEEL
( X2; FRONT AND REAR)
a. TIRE
b. TIRE VALVE WITH DUST CAP
c. WHEEL REFLECTOR
d. RIM
e. SPOKES
f. AXLE NUT
HEADLIGHT
FOLDING LATCH WITH LOCKING RING
HANDLEBAR
MOTOR
DISC BRAKE
(X2; FRONT AND REAR)
KICKSTAND
PEDAL WITH REFLECTORS
(X2; LEFT AND RIGHT)*
FENDER
(X2; FRONT AND REAR*)
CHARGING CABLE
CHARGER
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
9
NOTE: IMAGES MAY NOT REFLECT EXACT APPEARANCE OF ACTUAL PRODUCT.
1
a
2
3
11
12
13
14
15
16
17
4
5
6
19
19
7
8
10
20 21
18
9
bd
e
c
f
10
BELL
FRONT REFLECTOR
HANDLEBAR CLAMP
BATTERY INDICATOR LIGHTS
1.
2.
3.
4.
HEADLIGHT & CRUISE CONTROL BUTTON
POWER BUTTON
TWIST THROTTLE
HANDBRAKE (X2; LEFT/FRONT & RIGHT/REAR)
5.
6.
7.
8.
1
4
8
83
2
6
5
7
12
3
4
5
6
7
13
14
158
9
10 11 12
16
11
INCLUDED TOOLS FOR ASSEMBLY, TIGHTENING, AND MAINTENANCE:
DEPENDENT ON THE PRODUCTION DATE OF YOUR BOLT PRO, YOU RECEIVED ONE OF THE FOLLOWING
TOOL COMBINATIONS.
6MM ALLEN KEY FLATHEAD SCREWDRIVER1. 9.
3. 11.
5. 13.
14.
15.
16.
2. 10.
4. 12.
6.
7.
8.
4MM ALLEN KEY 9MM SOCKET
2.5MM ALLEN KEY 14 GAUGE SPOKE WRENCH
8MM HEX WRENCH
15MM HEX WRENCH
10MM HEX WRENCH
5MM ALLEN KEY 10MM SOCKET
2MM ALLEN KEY 8MM SOCKET
2MM ALLEN KEY
SOCKET SCREW
PHILLIPSHEAD SCREWDRIVER
10 MM SPANNER WRENCH
2BIT TOOL WITH PHILLIPSHEAD SCREWDRIVER AND
5MM ALLEN KEY TIPS
2BIT TOOL WITH PHILLIPSHEAD SCREWDRIVER AND
4MM ALLEN KEY TIPS (SOME MODELS)
OR
OR
TIP IDENTIFICATION:
MULTITOOL
12
Specs & Features
· PRODUCT DIMENSIONS, UNFOLDED: 46.5” L × 19” W × 40” H
· PRODUCT DIMENSIONS, FOLDED: 46.5” L × 15” W × 23” H
· PRODUCT WEIGHT: 41 LBS
· TIRE SIZE: 14” H
· BATTERY: 36V, 6AH LITHIUMION
· CHARGER: 100240V
· CHARGING TIME: UP TO 5 HOURS
· MOTOR: 350W
· RECOMMENDED TIRE PRESSURE: 35  45 PSI
Rider Suitability
FOR SAFE AND COMFORTABLE RIDING, THERE SHOULD
BE A CLEARANCE OF AT LEAST 13 INCHES BETWEEN
THE CROTCH AND THE TOP TUBE OF THE BICYCLE
FRAME WHEN THE RIDER STRADDLES THE BICYCLE
WITH BOTH FEET FLAT ON THE GROUND.
· MAX SPEED: 15.5 MPH
· MAX THROTTLE RANGE: 15 MILES
· BRAKE TYPE: FRONT & REAR DISC
· REAR LIGHT BATTERY: 3V INCLUDED
· WEIGHT LIMIT: 265 LBS
· RECOMMENDED AGE: 12+ US; 16+ CANADA
· WATER RESISTANCE RATING: IPX5
· UL CERTIFICATION: 2849
1-3
inches
13
WARNING:
FAILURE TO COMPLY WITH THE FOLLOWING INSTRUCTIONS MAY RESULT IN INJURY TO THE CHILD OR OTHERS.
• KEEP SMALL PARTS AWAY FROM CHILDREN DURING ASSEMBLY.
• ACCESSORY MUST BE ASSEMBLED AND REMOVED BY AN ADULT.
• FREQUENTLY INSPECT THE PRODUCT FOR DAMAGE.
* ADULTS MUST ASSIST CHILDREN IN THE ASSEMBLY AND INITIAL ADJUSTMENT PROCEDURES OF THE PRODUCT.
Scan for our most updated
Bolt Pro onboarding materials
and support resources.
Online Resources
14
1. Getting Started
STARTING NOTES:
· REMOVE ALL PACKAGING BEFORE BEGINNING ASSEMBLY.
· THE DIRECTIONS GIVEN IN THIS MANUALRIGHT, LEFT, FRONTFORWARD, AND REARBACKARE ORIENTED AS THE
RIDER WOULD SEE THEM WHEN SEATED ON THE BIKE. THE “RIGHT SIDE” OF THE BIKE, FOR EXAMPLE, IS THE SIDE WHERE
THE RIDER’S RIGHT HAND AND FOOT WILL BE.
· IT IS EASIER TO ASSEMBLE YOUR BIKE WITH IT PROPPED UPRIGHT ON ITS KICKSTAND. REFER TO PAGE 44.
· REMANUFACTURED BOLT PROS MAY ARRIVE WITH SOME ASSEMBLY STEPS ALREADY COMPLETED.
15
1.1 Unfolding & Folding the Handlebar
WHEN TO UNFOLD: FOR RIDING
WHEN TO FOLD: FOR STORAGE AND TRANSPORT
HOW TO UNFOLD:
1. GENTLY RAISE THE HANDLEBAR UNTIL THE STEM IS RESTING VERTICALLY ON THE FRAME.
STEM
16
LATCH
16
2. PUSH THE LATCH IN UNTIL IT CLICKS INTO THE
CLOSED LATCHED POSITION.
17
3. SECURE THE LATCH WITH THE LOCKING RING:
ROTATE THE RING CLOCKWISE AROUND THE STEM
UNTIL THE TAB ON THE RING SLIDES INTO THE TAB
SLOT ON THE LATCH.
4. CHECK THAT THE LATCH IS SECURED BY ENSURING
THAT IT CANNOT BE PULLED OPEN.
IMPORTANT: NEVER RIDE THE BOLT PRO WITHOUT
THE FOLDING LATCH CLOSED AND SECURED BY THE
LOCKING RING.
LOCKING RING
LOCKING RING TAB
3
4
18
HOW TO FOLD:
1. ROTATE THE LOCKING RING COUNTERCLOCKWISE AROUND THE STEM UNTIL THE TAB CLEARS FROM THE TAB SLOT ON
THE FOLDING LATCH.
2. WHILE HOLDING THE HANDLEBAR STEM STEADY WITH ONE HAND, USE THE OTHER HAND TO PULL
THE LATCH OPEN UNLATCHED.
3. GENTLY LOWER THE HANDLEBAR DOWN TOWARDS THE SIDE OF THE BIKE OPPOSITE THE LATCH.
1. 2. 3.
LOCKING RING
LATCHLOCKING RING TAB
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60

Jetson Bolt Pro Electric Bike Owner's manual

Category
Bicycles
Type
Owner's manual

Jetson Bolt Pro Electric Bike boasts an impressive range of features to enhance your riding experience. With pedal assist and all-electric modes, you can choose the level of assistance you need. The bike's sturdy frame and powerful motor can handle inclines and rough terrain with ease. Equipped with a bright headlight and rear light, you can ride safely even in low-light conditions. Plus, the easy-to-read display lets you monitor your speed, battery level, and distance traveled.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI