2. Razor
  3. 2014
2014

Razor 2014 User manual

  • Hello! I've analyzed the provided user manual for the Crazy Cart 2014 Foot Pedal Throttle replacement procedures. This document outlines the steps for how to remove the old throttle and install a new one including battery charging. I'm ready to answer your questions about the replacement process.
  • How many screws need to be removed from the battery cover?
    What tool is required to remove the cover screws?
    What is the next step after removing the cover screws?
    How long do I need to charge the battery after replacing the throttle?
Crazy Cart 2014 Foot Pedal Throttle
Replacement Procedures
(1) Using a Phillips screw driver remove seven screws
from the battery cover from the Throttle side.
(2) Locate and disconnect the connector from the
Throttle to the Controller.
(3) Flip the unit on the side and unthread the Throttle
cable from the unit.
(4) Using a Phillips screw driver remove three screws
that hold the throttle onto the frame of the unit.
Reverse the procedures
* Place the new Foot Pedal Throttle in place
* Secure it with the screws
* Secure Throttle cable onto frame and Re-connect throttle to controller.
* Re-attach Battery cover with screws
Attention: Charge battery 12 hours before using
Page 1 of 1
/