Schacht Wolf Traps User manual

Hello! I've reviewed the Wolf Trap assembly instructions and I'm ready to assist you. This document details the assembly process for several Wolf Trap models, and specifies the parts and steps to properly attach it to your Wolf Loom. Let me know if you have questions about the process.
What parts are included in the Wolf Trap assembly kit?

What tool is needed for assembly?

Where is the assembled Wolf Trap placed on the loom?

Find out more at schachtspindle.com

Schacht Spindle Company 6101 Ben Place Boulder, CO 80301

p. 303.442.3212 f. 303.447.9273

WOLF TRAP

Assembly

InstructIons for

All Wolf looms

PARTS

1 – left side bracket

1 – right side bracket

1 – cloth sleeve

2 – 1⁄2" dowels

4 – 6-18 x 1-1⁄4" Phillips at head

sheet metal screws

ASSEMBLY

1. Slide the dowels into the casings on the long sides of the cloth sleeve.

2. Line up the side brackets with the large holes facing to the inside.

3. Fit the dowels into the holes in the side brackets. From the outside of the bracket,

secure the dowels with the Phillips screws.

4. Place the assembled Wolf Trap onto the front beam of your loom.

TOOLS

#2 Phillips screwdriver

FL3830

FL3830C

FL3831

FL3831C

FL3832

FL3832C