(1) (2)Left Side Panel Right Side Panel (5)Center Shelf
Back Panel
1PC
STEP 1
NAP-156
Always lay components on A clean,
soft-cushioned surface during assembly.
877-
OSP-WORX
(677-9679)
65"H 2-DOOR CABINET W/5 SHELVES
(7)Bottom Rail
1PC 1PC
1PC
1PC
12PCS+1
1PC
(4)Bottom Panel
1PC 3PCS
(6)
Shelf
1PC 1PC 1PC 16PCS+1
12CS+1
12PCS+1
(H)Handle
2PCS 4PCS 12CS+1 2PCS
(D)Leg Leveller
4PCS 4PCS
13PCS+1
3.5*14(clear Zn)
8PCS+1
3.5*14(BLK)
24PCS+1
STEP 2 STEP 3
STEP 4 STEP 5 STEP 6
(2) (3)
(4) (5) (7)
(1)
(1)
(7)
NAP-156
Always lay components on A clean,
soft-cushioned surface during assembly.
877-
OSP-WORX
(677-9679)
65"H 2-DOOR CABINET W/5 SHELVES
STEP 7 STEP 8
STEP 10 STEP 11
STEP 9
(2)
(3) (4)
(5)
(8)
(6)
(6)
(6)
(9)
(10)
1.Affix 1st wall-attachment bracket to the
top of Bookcase, at rear/center, using(2)
SHORT screws.
2.Affix 2nd wall-attachment bracket to the
wall, using(2)wall anchors and(2) LONG
screws.
Note: Locate the 2nd bracket 1/4” higher
than the 1st bracket(now located on the
top of the bookcase). Align 2nd bracket
left/right with the 1st bracket.
3.Connect wall-attachment brackets with
plastic cable tie.
NAP-156
Always lay components on A clean,
soft-cushioned surface during assembly.
877-
OSP-WORX
(677-9679)
65"H 2-DOOR CABINET W/5 SHELVES
/
