STEP 1
(1)Top (2)End Panel (3)End Panel (4)Shelf (5)Fixed Shelf (6)Fixed Bottom (7)Back Panel (8)
Bottom Rail
(A)Dowel (B)Cam Pin (C)Cam Lock (D)Leg Leveller (E4)Wood Screw
(S1)Corner Bracket
1PC 3PCS 2PCS
20PCS+1 12PCS+1 12PCS+14PCS12PCS+1 12PCS+1 16PCS+2 4PCS
(A)
(D)
(D) (D)
(D)
(1)
(B) (2) (3)
(5) (6) (8)
(C)
(G)Shelf Pin
Bookcase 70 H
SON-56
36 W ×14 D×70 H
877-OSP-WORX
(677-9679)
Always lay components on A clean,
soft-cushioned surface during assembly.
(p)Dahesive
Cam Cover
1PC 1PC 1PC 1PC 1PC
(B)
(B)
(B)
STEP 2 STEP 3
STEP 5 STEP 6STEP 4
(A) (C)
(G)
(G)
(G)
(G)
(G)
(G)
(B)
(B)
(B)
(B)
(B)
(B)
(B)
(B)
(G)
(G)
(G)
(G)
(G)
(G)
(A)
(A)
(C)
(C)
(A)
(A)
(A)
(A)
(A)
(A)
(A)
(A)
(A)
(A)
(A)
(A)
(C)
(C)
(C)
(C)
(C)
(C)
(C)
STEP 8
(4)
(E4)
(8)
(S1)
(3)
(E4)
(4)
(2)
STEP 9
(7)
STEP10
(1)
(4)
(8)
(6)
STEP 7
(5)
(B)
(3)
(B)
(5)
(3)
Bookcase 70 H
SON-56
36 W ×14 D×70 H
877-OSP-WORX
(677-9679)
Always lay components on A clean,
soft-cushioned surface during assembly.
(F)
(F)
(F)Wall-attachment kits
1PC
STEP 11
1.Affix 1st wall-attachment bracket to the top of Bookcase,
at rear/center, using(2) SHORT screws.
2.Affix 2nd wall-attachment bracket to the wall,
using(2)wall anchors and(2) LONG screws.
Note: Locate the 2nd bracket 1/4” higher than the 1st
bracket(now located on the top of the bookcase). Align 2nd
bracket left/right with the 1st bracket.
3.Connect wall-attachment brackets with plastic cable tie.
Bookcase 70 H
SON-56
36 W ×14 D×70 H
877-OSP-WORX
(677-9679)
Always lay components on A clean,
soft-cushioned surface during assembly.
(F)
(F)
/
