RiverRidge Home 16-028 Installation guide

Brand
RiverRidge Home
Model
16-028
Type
Installation guide
ASSEMBLY INSTRUCTIONS
RiverRidge
®
Woodbury Shoe Cabinet
ITEM #: 16-028
ADULT ASSEMBLY REQUIRED
This product requires assembly by an adult because of small parts. Care should be taken in
unpacking and assembling this item to keep small parts away from children.
WARNING SEE FULL WARNING ON PAGE 2
Young children can be seriously injured or killed if furniture tips over. Don’t use
this item for a TV stand or place heavy objects on top of item. Always use
angle-braces or anchors to secure furniture to the wall.
THIS SHELF UNIT WILL HOLD UP TO 20 POUNDS PER SHELF AND TOP BOARD FOR A
TOTAL OF 100 POUNDS. DO NOT LOAD SHELVES OR TOP BOARD WITH MORE THAN
20 POUNDS. OVERLOADING WITH MORE THAN 20 POUNDS PER SHELF OR TOP
BOARD OR 100 TOTAL MAY CAUSE SHELF TO TIP FROM WALL AND CAUSE DAMAGED
TO THE SHELF OR SERIOUS INJURY OR DEATH.
PARTS LIST
NO
QTY
DESCRIPTION
1
1PC
Top Board
2
1PC
Adjustable Shelf
3
1PC
Fixed Shelf
4
1PC
Fixed Shelf
5
1PC
Bottom Board
6
1PC
Left Side Panel
7
1PC
Right Side Panel
8
1PC
Upper Back Board
9
1PC
Lower Back Board
10
2PCS
Door
11
4PCS
Metal Leg
PARTS LIST
NO
PART
QTY
DESCRIPTION
A
12PCS
Cam Bolt
B
12PCS
Cam Lock
C
16PCS
Wood Dowel (8x30mm)
D
4PCS
Screw(4x35mm)
E
8PCS
Machine Screw (6x30mm)
F
8PCS
Shim
G
4PCS
Shelf Holder
H
4PCS
Hinge
I
24PCS
Screw (4x14mm)
J
2PCS
Bracket
K
2PCS
Screw (4x14mm)
L
20PCS
Screw (2.5x10mm)
M
2PCS
Plastic Anchor
N
2PCS
Handle
O
4PCS
Machine Screw (4x18mm)
P
2PCS
Screw(5x40mm)
TOOLS NEEDED FOR ASSEMBLY: FLAT & PHILLIPS SCREWDRIVER (NOT INCLUDED)
THE USE OF POWER SCREWDRIVER IS NOT RECOMMENDED FOR ASSEMBLY
TOOL NEEDED FOR SECURING TO WALL: POWER DRILL (NOT INCLUDED)
To order replacement parts at no cost to you, email customer.service@ssi-rr.com,
call 1-(844)-223-5201 or order parts online at www.riverridgehome.com
STEP 1
1. Screw 4 cam bolts (A) into pre-threaded holes on top board (1).
2. Attach brackets (J) to top board (1) by inserting 2 screws (K) through holes on brackets (J), then tighten
to top board (1).
STEP 2
1. Screw 4 cam bolts (A) into pre-threaded holes on left side panel (6).
2. Screw 4 cam bolts (B) into pre-threaded holes on right side panel (7).
STEP 3
1. Insert 4 wood dowels (C) into wood dowel holes on right side panel (7).
2. Attach fixed shelf (3) and (4) to right side panel (7) by inserting wood dowels (C) into wood dowel holes
and cam bolts (A) into cam lock holes on fixed shelf (3) and (4).
3. Insert 4 cam locks on fixed shelf (3) and (4), then rotate clockwise to secure cam bolts in place.
STEP 4
1. Insert 4 wood dowels (C) into wood dowel holes on left side panel (6).
2. Attach fixed shelf (3) and (4) to left side panel (6) by inserting wood dowels (C) into wood dowel holes
and cam bolts (A) into cam lock holes on fixed shelf (3) and (4).
3. Insert 4 cam locks on fixed shelf (3) and (4), then rotate clockwise to secure cam bolts in place.
STEP 5
1. Insert 4 wood dowels (C) into wood dowel holes on bottom board (5).
2. Attach bottom board (5) to left side panel (6) and right side panel (7) by inserting wood dowels (C) into
wood dowel holes on left side panel (6) and right side panel (7).
3. Insert 4 screws (D) through holes on bottom board (5), then tighten to left side panel (6) and right side
panel (7).
STEP 6
1. Attach 4 metal legs (11) to bottom board (5) by inserting 8 machine screws (E) through holes on shims
(F), then through holes on metal legs (11) and tighten to bottom board (5).
STEP 7
1. Insert 4 wood dowels (C) into wood dowel holes on top board (1).
2. Attach top board (1) to left side panel (6) and right side panel (7) by inserting wood dowels (C) into
wood dowel holes and cam bolts (A) into cam lock holes on left side panel (6) and right side panel (7).
Make sure brackets face back side of cabinet.
3. Insert 4 cam locks (B) into cam lock holes on left side panel (6) and right side panel (7).
STEP 8
1. Attach upper back board (8) and lower back board (9) to back of cabinet, insert 20 screws (L) through
holes on upper back board (8) and lower back board (9), then tighten to back of cabinet.
STEP 9
1. Place drawing with hole position on wall in desired location and drill 2 holes on wall.
2. Insert 2 plastic anchors (M) into holes on wall.
3. Align brackets on cabinet in place with holes on wall, then insert screws (P) through holes on brackets (J)
and tighten to plastic anchors (M) in wall.
STEP 10
1. Insert 4 plastic holders (G) in holes on left side panel (6) and right side panel (7).
2. Place adjustable shelf (2) on plastic holders (G).
STEP 11
1. Attach 2 hinges (H) to door (10) by inserting 4 screws (I) through holes on hinges (H), then tighten to
door (10).
2. Attach handle (N) to door (10) by inserting 2 machine screws (O) through holes on door (10) and
tighten to handle (N).
3. Repeat above steps to assemble hinges (H) and handle (N) to another door (10).
STEP 12
1. Attach door (10) to cabinet by inserting 8 screws (I) through holes on hinges (H), then tighten to left
side panel (6).
2. Repeat above step to attach door (10) to right side panel (7).
3. Note: Tightening screw in position “a” will adjust door up or down; tightening screw in position “b”
will adjust door to or from cabinet and tightening screw in position “c” will adjust door side to side.
ATTENTION ADULTS: Cabinet should be checked periodically for damage or loose
screws/parts. Take appropriate action necessary to correct hazards such as tightening
of screws and taking any damaged parts away from children.
WARNING Please make sure your item is
secured to the wall, per assembly instructions.
Door Adjustments
Enjoy your new RiverRidge
®
Cabinet!
Thank you for purchasing this RiverRidge
®
Home item. We hope you
enjoy it and consider purchasing other RiverRidge
®
items.
To order replacement parts at no cost to you, email customer.service@ssi-rr.com,
call 1-(844)-223-5201 or order parts online at www.riverridgehome.com
RiverRidge
®
is a registered trademark of Sourcing Solutions, Inc., Hudson, WI 54016
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11

RiverRidge Home 16-028 Installation guide

Brand
RiverRidge Home
Model
16-028
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents