Page is loading ...
1. VXi warrants that your product will be free
from defects in material and workmanship for
two (2) years from the date of purchase. If, dur-
ing the first two years from the date of purchase,
your product fails to work due to a defect in mate-
rial or workmanship, VXi will repair or replace the
product, at its election, free of charge. Without a
proof of purchase, the warranty period begins on
the date of manufacture.
2. The foregoing limited warranty does not cover
equipment failure attributable to accident, im-
proper operation, misuse, abuse, or any cause
other than defects in the materials or workman-
ship of VXi’s products.
3. VXi’s obligations under this warranty are limit-
ed to repair or replacement (at our option) of any
defective part returned to VXi at the customer’s
expense. Returned products require a Return
Authorization (RA) number that may be obtained
online at www.vxicorp.com/customer-care/ or
by calling VXi’s After Market Services team at
(603) 609-1000. Products returned to VXi for
repair under this warranty will be return shipped
to the customer at VXi’s expense.
PN203123A ©2011 VXi Corporation Printed in China
Compatible with Windows® and
Macintosh® operating systems
X200 USB ADAPTER
For VXi V100 Wireless Headset System
271 Locust Street • Dover, NH 03820 USA
800-742-8588 • 603-742-2888
www.vxicorp.com
VXi Warranty VXi Warranty
4. THIS LIMITED WARRANTY IS IN LIEU OF ALL
OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING THE IMPLIED WARRANTIES OF MER-
CHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. Some jurisdictions do not permit the
exclusion of implied warranties and the forego-
ing exclusions may not apply to you.
5. In no event shall VXi be responsible for any
other damages, including direct, indirect, spe-
cial, incidental, consequential, or other damages
for breach of this or any other warranty, express
or implied.
For more information regarding VXi’s warranty,
please visit www.vxicorp.com/customer-care/
203124A_X200_USB_UG_09-14-11.indd 1 10/31/2011 2:08:56 PM
Connecting the X200 USB Adapter
1. Insert the USB connector into a USB port on
your computer (not into the keyboard).
2. Connect the modular plug into the base jack
port (orange dot) of the V100 base.
3. Check the audio settings (speaker and micro-
phone) on your softphone and in Windows to
ensure that the initial settings are at an appro -
priate level.
4. Check V100 User Guide for audio adjustment
of V100 components.
Installing the X200 USB Adapter
For Windows Me or higher: Installation is automatic once the USB
Connector on the X200 is inserted into the USB port of your computer.
For Macintosh: Please visit the X200 USB Adapter support section at
www.vxicorp.com for more information.
* When supported by a softphone
Compatible with Windows® and
Macintosh® operating systems
X200 USB ADAPTER
For VXi V100 Wireless Headset System
USB connector
Volume up
Answer/end call*
Mute
Volume down
Modular plug
203124A_X200_USB_UG_09-14-11.indd 2 10/31/2011 2:08:57 PM
/
