Ops-Core AMP Camo Skin Set Operating instructions

AMP CAMO SKINS

FOR OPS-CORE AMP

™

COMMUNICATION HEADSET

This product is covered by one or more patents.

For more information visit www.gentexcorp.com/patents

1000751

COLOR

MultiCam

1000660-02

MultiCam

Arid

1000660-04

MultiCam

Alpine

1000660-06

MultiCam

Tropic

1000660-05

MultiCam

Black

1000660-03

APPLY THE SKINS TO THE EARCUPS

Remove the adhesive backing and apply the skins to the proper locations on the earcups as shwon below.

APPLY THE SKINS TO THE RAIL ARMS

If you have a Rail Arm Kit (sold separately), apply the skins to the Rail Arms as shown below.

Left Eracup Right Eracup

INSTALLATION

CLEAN EARCUP SURFACE BEFORE APPLYING SKINS

Remove the earcups from the headband or rail arms. Use mild soap and water or isopropyl alcohol to clean the

surface of both earcups. Do not use harsh chemicals. Remove all dirt and grease before applying skins.

REMOVING AND REUSING SKINS

To remove and reuse skins, simply peel off slowly and reattach backing for future use.

Download PDF