Geovision GV-DVR / NVR Feature Guide User guide

Geovision
Brand
Geovision
Model
GV-DVR / NVR Feature Guide
Type
User guide

Geovision GV-DVR / NVR Feature Guide

This guide provides an overview of key features in V8.6.0.0 GV-System. It also includes information about how the features differ from similar features in earlier versions:

  • Supports New IP Devices: GV-System V8.6.0.0 now supports third-party IP devices from Arecont Vision, including the AV12186DN and AV40185DN models. These devices offer two-way audio communication, H.264 / MJPEG video codecs, and PTZ functionality.
  • Saves Captured Faces as JPEG Format: You can now save images of captured faces as JPEG format in 256 x 256 pixels for Face Detection. This feature can be accessed through the Video Analysis and Object Index/Monitor Setting menus.

Geovision GV-DVR / NVR Feature Guide

This guide provides an overview of key features in V8.6.0.0 GV-System. It also includes information about how the features differ from similar features in earlier versions:

  • Supports New IP Devices: GV-System V8.6.0.0 now supports third-party IP devices from Arecont Vision, including the AV12186DN and AV40185DN models. These devices offer two-way audio communication, H.264 / MJPEG video codecs, and PTZ functionality.
  • Saves Captured Faces as JPEG Format: You can now save images of captured faces as JPEG format in 256 x 256 pixels for Face Detection. This feature can be accessed through the Video Analysis and Object Index/Monitor Setting menus.
New Feature Guide V8.6.0.0
FGV8600-A
© 2015 GeoVision, Inc. All rights reserved.
Under the copyright laws, this manual may not be copied, in whole or in part,
without the written consent of GeoVision.
Every effort has been made to ensure that the information in this manual is
accurate. GeoVision, Inc. makes no expressed or implied warranty of any kind
and assumes no responsibility for errors or omissions. No liability is assumed
for incidental or consequential damages arising from the use of the information
or products contained herein. Features and specifications are subject to
change without notice.
GeoVision, Inc.
9F, No. 246, Sec. 1, Neihu Rd.,
Neihu District, Taipei, Taiwan
Tel: +886-2-8797-8377
Fax: +886-2-8797-8335
http://www.geovision.com.tw
Trademarks used in this manual: GeoVision, the GeoVision logo and GV
series products are trademarks of GeoVision, Inc. Windows and Windows XP
are registered trademarks of Microsoft Corporation.
April 2015
Feature Guide V8.6.0.0
Feature Guide for
V8.6.0.0 GeoVision Surveillance System
This Guide provides an overview of key features in V8.6.0.0 GV-System. It also includes
information about how the features differ from similar features in earlier versions.
Cards Supported
V8.6.0.0 only supports the following GV video capture cards:
• GV-600(S) V3.20 and later
• GV-650(S) V3.30 and later
• GV-800(S) V3.30 and later
• GV-804A V3.10 and later
• GV-600A, GV-600B
• GV-650A, GV-650B
• GV-800A, GV-800B
• GV-900A
• GV-1120, GV-1120A, GV-1120B
• GV-1240, GV-1240A, GV-1240B
• GV-1480, GV-1480A, GV-1480B
• GV-3008
• GV-4008, GV-4008A
• GV-5016
• GV-SDI-204
Note that GV-600 (V4), GV-650 (V4) and GV-800 (V4) and GV-804 (V4) Cards are renamed to
GV-600A, GV-650A, GV-800A and GV-804A. These V4 and A Cards are the same video
capture cards.
i
ii
Contents
Cards Supported .......................................................................i
Contents....................................................................................ii
1. Supporting New IP Devices.............................................................................1
2. Saving Captured Faces as JPEG Format........................................................2
3. Compacting Recorded Videos to GV-Backup Center......................................3
4. Creating up to 24 Storage Groups...................................................................4
5. Supporting Object Counting and Intrusion Alarm to 32 Channels ...................5
6. Displaying GV-System with up to 6 Monitors...................................................6
7. Setting the Panel Resolution of Remote ViewLog...........................................7
8. Improved Video Image and Attributes for GV-1480B / 1240B / 1120B Combo
Cards...............................................................................................................8
Feature Guide V8.6.0.0
1. Supporting New IP Devices
The following third-party IP devices will now be supported in V8.6.0.0
z Audio: A “|” mark indicates the GV-System supports the two-way audio communication
with the device; “X” indicates the function is unavailable in the device.
z Codec: The video codec supported by GV-System are listed.
z PTZ: A “|” mark indicates the GV-System supports the PTZ function of the device; “X”
indicates the function is unavailable in the device.
Brand Model Audio Codec PTZ
AV12186DN X H.264 / MJPEG X
Arecont
Vision
AV40185DN X H.264 / MJPEG X
1
2
2. Saving Captured Faces as JPEG Format
With GV-System V8.6.0.0 you can save images of captured faces as JPEG format in 256 x
256 pixels for Face Detection. To access the function, follow the steps below.
1. Click the Configure button, select Video Analysis and select Object Index/Monitor
Setting
2. Enable Face Detection and click the button aside.
3. Select Save as JPEG file and click OK.
The JPEG files are saved at the default path: \\GV folder\Jpg. You can also define the
storage page by using the Set Location function on the Object Index dialog box.
Figure 1-1
For details on face detection, see 3.7 Face Detection, Chapter 3, in Multicam Digital
Surveillance System User’s Manual (DVR User’s Manual).
Feature Guide V8.6.0.0
3. Compacting Recorded Videos to GV-Backup Center
You can now compact the recorded video files before backing up to GV-Backup Center in
GV-System V8.6.0.0. To enable the feature, follow the steps below.
1. Click the Network button and select Connect to Backup Center.
2. When connecting to GV-Backup Center for the first time, type its connection information
and click OK. This dialog box appears.
Figure 1-2
3. Click Advanced Settings, select Enable Compacting Backup Video File and Click OK.
Figure 1-3
If the recorded video is compressed with H.264 codec, it’ll be compacted into key frames only.
If the recorded video is compressed with MJPEG codec, you can use the Reserved Frames
(MJPEG) option to specify the number of frames.
For details on connection to GV-Backup Center, see 3.3 Connecting GV-System, Chapter 3,
in GV-Backup Center User’s Manual.
3
4. Creating up to 24 Storage Groups
The maximum number of video storage groups is now increased up to 24 groups. To access
this feature, follow the steps below.
1. Click the Configure button, select System Configure and select General Setting.
2. Click the Set Location button and select Storage Group Folder.
3. Click Add Storage Group
.
Figure 1-4
For details on storage setting, see 1.2.2 Setting Data Storage, Chapter 1, in Multicam Digital
Surveillance System User’s Manual (DVR User’s Manual).
4
Feature Guide V8.6.0.0
5. Supporting Object Counting and Intrusion Alarm to 32 Channels
The maximum number of channels supported for Object Counting and Intrusion Alarm is now
increased to 32 channels. In GV-System V8.6.0.0, click the Configure button, select Video
Analysis, and select Counter/Intrusion Alarm Setting.
Figure 1-5
For details on object counting and intrusion alarm, see 3.4 Object Counting and Intrusion
Alarm, Chapter 3, in Multicam Digital Surveillance System User’s Manual (DVR User’s
Manual).
5
6. Displaying GV-System with up to 6 Monitors
GV-System V8.6.0.0 can now be displayed with up to 6 monitors. To enable this feature,
select the displayer mode as Six View by running DMPOS.exe in GV-Folder.
Figure 1-6
For details on monitor display, see 11.3 Multi-view Display, Chapter 11, in Multicam Digital
Surveillance System User’s Manual (DVR User’s Manual).
6
Feature Guide V8.6.0.0
7. Setting the Panel Resolution of Remote ViewLog
In V8.6.0.0, you can now set the panel resolution of Remote ViewLog. Install and run Remote
ViewLog. Click the Setting button and select a desired resolution in the Display tab.
Figure 1-7
For details on Remove ViewLog, see 4.6 Remote ViewLog Service, Chapter 4, in Multicam
Digital Surveillance System User’s Manual (DVR User’s Manual).
7
8
8. Improved Video Image and Attributes for GV-1480B / 1240B /
1120B Combo Cards
The image quality and video attributes are now improved to make images exposed properly
as shown below when you use GV-1480B / 1240B / 1120B Combo Cards
GV-System V8.5.9.0 GV-System V8.6.0.0
Over Exposed (too much light) Properly Exposed (right amount of light)
Figure 1-8
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

Geovision GV-DVR / NVR Feature Guide User guide

Geovision
Brand
Geovision
Model
GV-DVR / NVR Feature Guide
Type
User guide

Geovision GV-DVR / NVR Feature Guide

This guide provides an overview of key features in V8.6.0.0 GV-System. It also includes information about how the features differ from similar features in earlier versions:

  • Supports New IP Devices: GV-System V8.6.0.0 now supports third-party IP devices from Arecont Vision, including the AV12186DN and AV40185DN models. These devices offer two-way audio communication, H.264 / MJPEG video codecs, and PTZ functionality.
  • Saves Captured Faces as JPEG Format: You can now save images of captured faces as JPEG format in 256 x 256 pixels for Face Detection. This feature can be accessed through the Video Analysis and Object Index/Monitor Setting menus.
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents